Best Silver Scissors Shears in 2026

◇[TECHNICAL PARAMETERS]---Free speed: 2600RPM | Air inlet size: 1/4" | Air pipe size: 3/8" | Air consumption: 3CFM. Cutting range: Diamond mesh≤1mm; Screen mesh≤1mm; Copper≤1.5mm; Stainless steel≤0.8mm; Iron≤1.3mm; Aluminum≤1.5mm. Perfect for sheet cutting, soffit, fascia corners, thin plastic tubing and metal wire etc.

◇[ADVANTAGES COMPARED WIHT ELECTRIC SCISSORS]---Low working pressure and environmental protection; can work in humid and dusty environment, safe to use; stronger water resistance than electric tools; can adjust the output power and speed by controlling the air intake, and the operation is simpler.

◇[REAR EXHAUST HOLE DESIGN & ALUMINUM ALLOY HANDLE]---This newtry pneumatic scissor uses a reasonable rear exhaust hole design to prevent side exhaust from causing jets to the human body. At the same time, there is gauze at the air inlet, which can effectively prevent the air holes from being blocked. The handle is made of aluminum alloy. It is non-slip and wear-resistant, feels comfortable, holds firmly, and is not easy to drop.

◇[WHY CHOOSE UPGRADE B]---The upgraded B scissors adopt larger cutter head, forged by alloy steel. Large cutter head is more efficient and more powerful. Shear ability: Carbon steel: 0-1.2mm; Stainless steel: 0-1mm; Color steel tile: 0-1.5mm; Aluminum: 0-1.2mm; Iron diamond mesh:0-1.3mm; Aluminum diamond mesh: 0-1mm. The handle of it is made of strong aluminum alloy.

◇[STRONG CUTTING BLADE]---The cutter head of this pneumatic scissors is selected high-quality steel and precision forged; at the same time, the cutter head is specially treated by quenching and hardening, so that it has the advantages of sharpness and durability, fast and efficient work, smooth cutting, and wear resistance.

◇[AIR INTAKE-AIR EXHAUST]---Air intake size: 1/4”; air pipe size: 3/8”. This type of pneumatic scissors adopts a reasonable rear-row design of exhaust holes, which can prevent the side exhaust from causing jets to the human body. At the same time, there is a gauze in the air inlet of the scissors, which can effectively prevent the air holes from being blocked. Please pull out the hole cover before use. The overall design is very scientific.

◇[TECHNICAL PARAMETERS]--Free speed: 2600RPM | Maximum working pressure: 90PSI | Air inlet size: 1/4" | Air pipe size: 3/8" | Air consumption: 3CFM. Cutting range: Stainless steel: 0-0.8mm; Iron: 0-1.3mm; Aluminum: 0-1.5mm.

◇[WIDE CUTTING RANGE]---Applicable materials: stainless steel, color steel tile, iron sheet, diamond mesh, aluminum sheet, screen mesh.

◇[ADVANTAGES COMPARED WIHT ELECTRIC SCISSORS]---Low working pressure and environmental protection; can work in humid and dusty environment, safe to use; stronger water resistance than electric tools; can adjust the output power and speed by controlling the air intake, and the operation is simpler.

S7P blades are made in Taiwan ,suitable for HS30 , HS35P and YM300 air nipper

Cut Thickness:6 Gauge(5mm) Copper Wire , 13 Gauge(2.5mm) Steel Wire

S7P cutter heads are easy to install and replace , installation video can be provided if you need .

✎ The main body is made of high-carbon steel, which is strong, durable and strong in cutting ability.

✎ This pneumatic scissors can be used to cut fiber sheets, copper, iron, plastic sheets, etc.

✎ The blade is thick and can be cut plastic sheet: 1.0mm thick x 15mm wide, band iron plate: 0.5mm thick x 15mm wide.

◇[TECHNICAL PARAMETERS]---Free speed: 2600RPM | Maximum working pressure: 90PSI | Air inlet size: 1/4" | Air pipe size: 3/8" | Air consumption: 3CFM

◇[WIDE CUTTING RANGE]---Applicable materials: stainless steel, color steel tile, iron sheet, diamond mesh, aluminum sheet, screen mesh.

◇[ADVANTAGES COMPARED WIHT ELECTRIC SCISSORS]---Low working pressure and environmental protection; can work in humid and dusty environment, safe to use; stronger water resistance than electric tools; can adjust the output power and speed by controlling the air intake, and the operation is simpler.

Manufactured to Industrial Standards for a prolonged life of the tool

Small, light weight aluminum body increases productivity while reducing operator fatigue

Cutting Capacity: Copper 2.6 mm, Steel: 2.0 mm, Plastic 5 mm, Copper 10 Gauge , Steel 12 Gauge

Shears plastic ,aluminum,steel and other metals.

Use for autobody repair.Width of cut:7/32“ Max.speed:2100PRM

Hardened steel blades cut up 18-gauge(1.2mm) steel

* Durable tool is solidly constructed for portability and can cut up to 18 gauge steel with ease

* Cut capacity :A. Stainless Steel Plate: 0.8mm , B. Iron Plate: 1.2mm , C. Aluminum Plate: 1.6mm

* Air Inlet: 1/4" ,Hose Size: 3/8" ,Free Speed: 2500RPM

Premium Material :Made of high quality material steel, which makes it more durable and you can use it for a long term.

Practical Function :This shears can be used for a long time, release your hands and avoiding hand pain.

Widely Used :Suitable for the cutting of sheet metal and stainless steel plates in the fields of automobile maintenance, hardware processing, sheet metal cutting, etc.

【Material】This air metal shear is made of high quality material steel, which makes it more durable and you can use it for a long term. High quality materials can bring you a good experience

【Advantage】This pneumatic shear can be used for a long time, release your hands and avoiding hand pain which is very easy for you to use it

【Wide Application】The pneumatic scissors is suitable for the cutting of sheet metal and stainless steel plates in the fields of automobile maintenance, hardware processing, sheet metal cutting

ELECTRIC TOOLS: Lightweight design and non‑slip rubber handle limit fatigue during operation. Combined our precision-machined cutting head with a compact motor drive makes this cordless cut-out tool with the LED lighting ideal for any project

CONTRACTOR TOOL: The electric metal shear head swivels 360 degree for cutting convenience. If you need to work on several homes, these electric shears are for you. Power shears made with reversible and replaceable solid tool chrome vanadium blades, the metal flakes can be cut at will

TO SHEAR CEMENT BOARD: This electric metal cutter was created to shear cement siding rather than cut it, making precise, fast, and consistent cuts. Ideal for use on pre-painted siding, always cut planks face down for perfect, crisp, and finished edges when using this siding tool

Powerful, handheld pneumatic metal cutting shear cuts through aluminum (1.6mm) and steel (1.2mm)

Durable tool is solidly constructed for portability and can cut up to 18 gauge steel with ease

Ideal for cutting ferrous and non ferrous sheet metals, rubber and plastics without deformation of edges and can cut angles, squares, circles with ease

Alloy steel cutter head of Air Scissors is finely ground for higher sharpness, which can easily shear copper wire, iron wire and stainless steel wire.

Air Scissors has aviation aluminum body, wear resisting, anti-impact and durable.

Air Scissors is compact and lightweight, easy to operate, suitable for long time use.

Suitable for HS30 air nippers .

Guaranteed quality The cutter head can be rotated to any angle, loosen the screw to rotate, and turn to an appropriate angle for cutting.

Good load-bearing Comfortable grip, non‑slip, wear‑resistant, comfortable to handle, stable to hold, and not easy to drop.

Well-made Pneumatic scissors blade hardened treatment, which has the advantages of wear resistance and smooth cutting.

【Specification】This pneumatic metal cutter is easy to use and quick to install. Speed: 2500rmp, Cutting Ability: 1.2mm for iron sheet and 1.6mm for aluminum, Inlet Connector: 1/4in, Connector: inch, Hose Size: 3/8in, Maximum Working Pressure: 90psi

【Advantage】The handle of the scissors is made of soft rubber. Non-slip, wear-resistant comfortable to handle, stable to hold, and not easy to drop.This pneumatic shear can be used for a long time.

【AIR INTAKE-AIR EXHAUST】This type of pneumatic scissors adopts a reasonable rear-row design of exhaust holes, which can prevent the side exhaust from causing jets to the human body. At the same time, there is a gauze in the air inlet of the scissors, which can effectively prevent the air holes from being blocked. Please pull out the hole cover before use. The overall design is very scientific.

Powerful Cutting Capability: The Air Pneumatic Power Straight Scissors Metal Shears Cutter Blade Cutting Tools are designed to provide powerful cutting capability, making them suitable for cutting through a range of materials, including metal and plastic.

Ergonomic Design: The scissors are designed with an ergonomic handle to reduce fatigue and make handling the tool easier. The handle is also non-slip, ensuring that you can hold the tool securely during use.

Durability: The scissors are made from high-quality materials, ensuring that they are durable and can withstand heavy use in a manufacturing environment.

HIGH-QUALITY AIR SCISSORS: Aviation aluminum body, one-piece molding process, pressure-resistant and durable. Alloy steel scissors head, one-piece processing, sharp and sturdy. Blades can be replaced and removed

HANDHELD AIR SCISSORS: Portable and compact structure and ergonomic handle design, reduce your fatigue during operation. Lightweight and easy to use, handheld operation, efficient and durable

SPECIFICATIONS: Air consumption: 584cm³/time, working air pressure: 0.5-0.6mpa, applicable trachea: 8*5mm, shearing capacity: soft plastic 10mm hard plastic: 6.5mm

STRAIGHT SCISSOR-- With color- handle, smooth operation

METAL SHEET SHEAR-- Safety buckle, self-tensioning spring is convenient, and the buckle design is safer to store.

METAL PLATES-- Safety buckle, self- tensioning spring is convenient, and the buckle design is safer to store.

Exhaust Hole Design: Pneumatic scissor adopts reasonable rear exhaust hole design, prevent side exhaust from spraying on the human body, which is safer to use, the air inlet has gauze, which can effectively prevent air holes from being blocked Industrial grade pneumatic straight scissors hine YDE-793

Ergonomic Handle: The handle is made of soft rubber, slip and wear resistant, and is ergonomically designed, which is comfortable and stable to hold, suitable for long time work 33

Precise Forging: The scissor head is precise forged from high quality steel, provides smoothly cutting and efficiency working

P8P Heavy Duty Blade are made in Japan ,easy to replace(install).

Cut Ability:3Gauge(6mm) Copper Wire ,8Gauge(4mm) Iron Wire

Suitable for Industrial YM480 air nipper

Name: Pneumatic Scissors

Model: K12/K18/K25/K40/K56 (optional)

Opening length: 12CM/18CM/25CM/40CM/56CM (optional)

【Specification】This pneumatic metal cutter is easy to use and quick to install. Speed: 2500rmp, Cutting Ability: 1.2mm for iron sheet and 1.6mm for aluminum, Inlet Connector: 1/4in, Connector: inch, Hose Size: 3/8in, Maximum Working Pressure: 90psi

【Advantage】The handle of the scissors is made of soft rubber. Non-slip, wear-resistant comfortable to handle, stable to hold, and not easy to drop.This pneumatic shear can be used for a long time.

【AIR INTAKE-AIR EXHAUST】This type of pneumatic scissors adopts a reasonable rear-row design of exhaust holes, which can prevent the side exhaust from causing jets to the human body. At the same time, there is a gauze in the air inlet of the scissors, which can effectively prevent the air holes from being blocked. Please pull out the hole cover before use. The overall design is very scientific.

Portable Design: The pneumatic scissors are designed to be separated from the main body and the cutter head, convenient for installation and operation.

Aluminum Alloy Body: The main body is made of aluminum alloy, with CNC fine machining, the inner cylinder wall is finely polished, no burrs and no air leakage.

Alloy Steel Blades: The scissors head is made of alloy steel, with high strength and hardness, incisive and wear resistant, not easy to scratch or chip.