Best Screen Printing Consumables Screen Printing in 2026

✅►𝐅𝐔𝐍𝐂𝐓𝐈𝐎𝐍:This screen hinge clamp is used to fix the screen frame during screen printing, and it is used to fix the screen frame on the table or work surface.

✅►𝐏𝐑𝐄𝐌𝐈𝐔𝐌 𝐌𝐀𝐓𝐄𝐑𝐈𝐀𝐋:Screen printing Hinge Clamps, also called butterfly clamps, are fabricated from a heavy-duty zinc alloy. They are used for fixing screens when printing. They feature a wide-wing thumbscrew for firmly fastening the clamp to the frame.

✅►𝐏𝐀𝐑𝐀𝐌𝐄𝐓𝐄𝐑:Application Thickness of Screen: below 2" (51mm). Height: 3.5" (90mm) Length of Clamp: 2.4" (60mm) Net Weight: 0.44Lb (0.2kg)

𝐀𝐩𝐩𝐥𝐢𝐜𝐚𝐭𝐢𝐨𝐧:8 Layers Wall Mounted Screen Frame Rack 25" x 28" . This rack is used to store screen frames or screen printing squeegee. It is a split structure, you can make any combination and fix according to your needs to place various sizes of screen frames.

𝐑𝐞𝐜𝐨𝐦𝐦𝐞𝐧𝐝 𝐌𝐨𝐮𝐧𝐭𝐢𝐧𝐠 𝐃𝐢𝐬𝐭𝐚𝐧𝐜𝐞:3.15 inch（8cm）longer than the length of your screen mesh roll. The distance between each layer is 2.165 inch（5.5cm） . The distance between the screen frames is secure enough to keep the screen clean.

𝐒𝐩𝐞𝐜𝐢𝐚𝐥 𝐃𝐞𝐬𝐢𝐠𝐧: The rack can be fixed on the wall directly by non-trace nail. Easy to install, causes minimal damage to the wall.

Specifications: Voltage: 110/220V;Maximum Exposing Area:25x28 inches; Plug standard: US, Canada; Exposure Time range: 1s-9999999s; Item weight: 88lbs;Note: The maximum external size of your screen frame must be within 28" x 25"x1.5".

12 LED UV(ultraviolet) fluorescent lights makes exposure evenly ,which guarantees the exposure quality.Timer will turn off the light automatically according to the setting. It will keep this setting and repeat use unless you change the exposing time.

Based on the User-friendly and practical principles, this LED Exposure Unit adopts table top structure, professional design and easy operation.Complete accessory tools and spare parts make it easy to maintain and replace. We also provide excellent post sales service, don't hesitate to contact us if you need any help.

This machine is mainly used for (1) drying screen plate after screen degreasing; (2) drying screen plate after coating photosensitive emulsion; (3) drying the finished screen plate; (4) short-term storage in the dark after coating photosensitive emulsion; (5) it is suitable for drying and curing products at 122-158°F(50-70 ℃).

The machine can hold 6 screen frames with the external size of 35.4inch (90mm) long and 23.6inch(600 mm) wide. The height between each layer is 2.36inch(60 mm). Each layer consists of 5 stainless steel tubes with the diameter of 0.6inch(16 mm). The distance between each tube is 4.5inch, which is suitable for small screen plate.

Two 1200W heat fans are used and the heat fan adopts PTC heating body and strong fan to improve heating efficiency. It has the function of timing and can work continuously. You can turn on one or both fans according to your needs.

✅【𝐍𝐢𝐜𝐞 𝐃𝐞𝐬𝐢𝐠𝐧】Combined folding structure for easy transportation. Stainless steel mainframe with high bearing capacity, oxidization resistant and no rust. Equipped with 12pcs of partition clips for easily drying screen frame. The rack can afford heavy weight, not oxidized, no rust, and it can be used for a long time. Equipped truckles makes it much easier and more convenient to move the machine while using. Adopted black fabric covering can not only avoid light, but also can be dust proof .

✅【𝐇𝐢𝐠𝐡 𝐄𝐟𝐟𝐢𝐜𝐞𝐧𝐜𝐲】This silk screen drying cabinet adopts PTC heating, high speed intelligence fan, it is low noise and hot air is large amount ; The highest temperature in the box can reach 50 to 70 degrees(122F- 158F ), it is especially suitable for drying the screen plate.

✅【𝐓𝐢𝐦𝐢𝐧𝐠 𝐅𝐮𝐧𝐜𝐭𝐢𝐨𝐧】The longest timing period can reach 3 hours.

Aluminum screen frames are most widely used frames to make stencil during screen printing.

Adopt custom-built specialized aluminum. The sticky sides have been burnished, to ensure screen and frame binding firmly.

Aluminum screen frame is with high strength. It fully meets the needs of tension stretching, hardness, durability, lightweight, portability and cheapness.

✅【𝐌𝐮𝐥𝐭𝐢𝐩𝐥𝐞 𝐀𝐩𝐩𝐥𝐢𝐜𝐚𝐭𝐢𝐨𝐧𝐬】This screen printing machine is mainly used for printing item with flat surface in cylinder or cone shape. Equipped with 3 kinds of holders that can fit different shape of item, such as bottles, mugs, pen ,rod, bucket.

✅【𝐋𝐞𝐟𝐭-𝐡𝐚𝐧𝐝𝐞𝐝 𝐅𝐫𝐢𝐞𝐧𝐝𝐥𝐲】The printing operation is extremely smooth. Screen's pulling direction can be adjusted according to the printing need. Even left handed people can use it.

✅【𝐒𝐭𝐚𝐛𝐥𝐞】The screen will remain firm and stable in the printing process as the screen clamp will fix the screen in 2 directions. The screen holder will prevent the screen from falling when printing, The clamp and holder can be adjusted according to the size of the screen. The handle can be installed in 2 ways.