Best Arana Shock Lift Supports in 2026

✅For Jeep Wrangler Window Shocks -- Exact-fit replacement lift support struts shocks for your worn-out factory parts of Jeep Wrangler 1997-2006;

✅Interchange Part Number-- SG214012, 4249, 8195729, 10663, 2884NY, 55076310AD, 55076310AB, 72236, RB8795749, 95749, 610665;

✅Vehicle Location-- Rear Window Glass of Jeep Wrangler 1997-2006;

✅Front hood struts for dodge ram -- ARANA 4364 lift supports Perfect fit for 2002-2010 Dodge Ram 1500/2500/3500/4500/5500;

✅Front hood shocks for dodge ram -- Vehicle Location: Front Hood. , interchange part number: 55276321AA,55276321AB,55276321AC, SG314036, 4364

✅Front hood lift supports for dodge ram -- direct replacement hood struts for your oem parts; 5 minutes quick install, make your front hood works like new!

[For Acura TL Front Hood Replacment Lift Struts]: Set of 2pcs front hood lift support struts perfect fit for Acura TL; You can use them to replace your worn-out factory gas prop shocks;

[Perfect Relacement for Acura TL Front Hood]: The gas struts fit for your 2004 2005 Acura TL perfectly.

Surprisingly Simple 3-Step Easy-to-install Front Hood Replacement Shocks] These lift support struts are designed for the front hood of your Acura TL; Use a flat screwdriver to remove the retaining clips of the old struts, and snap the ball ends of the new struts into place with finger, your front hood will work like new within 5 minutes!

✅ Interchange Number: 4514, 4514S10, C1604445, C16-04445,1595EY,8195565, AH8650, ML1650, ML16-50, ML-16-50, ML3650, ML36-50, ML-36-50, P2032, SE172P55,SE618A45PS130PM3, SE630V-55, SL1650, SL16-50, SL-1650, SL-16-50, SL16501, SL16-50-1, SL-16501,SL-16-50-1, SL16505, SL16-50-5, SL-16505, SL-16-50-5, SL3650, SL36-50, SL-3650;

✅ 17 inch 55Lb Gas Struts -- Extended Length (Center-to-Center): 17.2" (436.9 mm); Compressed Length (Center-to-Center): 10.6" (269mm); Force: 55 lbs (245N) Per Strut, 2 Struts per set, not 1;

✅ 4514 17 inch Gas Spring -- ARANA 4514 struts could be used as the replacement parts for toolbox lid, truck topper, Leer cap, camper shell, truck canopy top, etc.

[For Chevrolet Corvette Front Hood Replacment Lift Struts]: Set of 2pcs front hood lift support struts perfect fit for Chevrolet Corvette; You can use them to replace your worn-out factory gas prop shocks;

[Perfect Relacement for Chevrolet Corvette Front Hood]: The gas srruts fit for your 2008 427 Limited Edition Z06 Coupe/2005-2012 Base Convertible/2005-2012 Base Coupe /2005-2012 Grand Sport Convertible.

[Surprisingly Simple 3-Step Easy-to-install Front Hood Replacement Shocks] These lift support struts are designed for the front hood of your Chevrolet Corvett; Use a flat screwdriver to remove the retaining clips of the old struts, and snap the ball ends of the new struts into place with finger, your front hood will work like new within 5 minutes!

✅ ARANA 20 inch Gas Struts C1608054 Lift Supports -- 2Pcs Set Force 100 Pounds 445N Gas Shocks , most SUITABLE support weight for 2 STRUTS is 85 lbs - 110 lbs, this means if your project lid is between 85 pounds and 110 pounds, this 100LB gas strut set is SUITABLE!

✅ ARANA 20 Inch 100 Lbs Gas Spring Shocks -- Extended Length A [in]: 19.7(500mm), Compressed Length B [in]: 11.8(300mm), Interchange number: 6939, 6939S10, C1608054, C16-08054; measurement of the supported lid weight or of your old strut pressure is required to prevent purchasing wrongly!

✅ C16-08054 Gas Props 20inch -- Direct replacement struts for RV bed, motorhome bed, tanning bed, camper bed, travel trailer bed mattress, queen bed, etc.;Note: DO NOT compress them by hands before installing, the struts could only be compressed after installing successfully!!!

✅15 inch gas strut 45lb - this 15 inch 45 lb struts are widely used on A.R.E topper, truck cap, Leer/SnugTop camper shell, Camper Shell Back Window, leer Pickup truck cover, TV Cabinet, custom-made storage box, toolbox, trap door, etc.

✅15 inch struts 45lbs - ARANA 15 inch spring shocks will be suitable for lid weight between 35-50 lbs, side length ≥ 25 inch; Note: do measure the lid weight or check the oem number to buy correct items;

✅15 inch gas spring shocks 45lbs - Extended Length A (Center-to-Center):14.96 inch (380 mm), compressed length B (Center-to-Center): 9.02 inch (229 mm), 2 Shocks per Pair, 10mm metal end fitting with 4 ball studs and nuts;

Exact replacement hatch liftgate struts for honda pilot 2003-2008, if you find NOT FIT or RECEIVED A WRONG PRODUCT, please kindly click ASK SELLER to message us, we will send you new correct product to you without your returning the PREVIOUS PACKAGE!

Vehicle Location: Rear Tailgate Liftgate. Interchange number: 4373,SG226013

2Pcs Set Rear Hatch Lift Struts; Perfect fits 2002-2008 Honda Pilot; Please remove your both old struts before installing these new struts;

✅ ARANA 6103 Rear Hatch Lift Support Struts exact fits the original equipment design, could be used as the direct OEM replacement struts for 2005 2006 2007 2008 2009 2010 Dodge Magnum;

✅ ARANA 6103 Rear Liftgate Struts Perfect fits for 2005-2010 Dodge Magnum; Interchange part number: 6103; If any unfit or defective issue, please message or email to us and let us send you the replacement package!

✅ ARANA Rear Tailgate Struts could replace your worn-out oem lift supports struts within 5 minutes, only need a small screw driver to pry up the metal clip of the old shocks and then replace with the new set;

[Direct Replacement For Scion tc Rear Trunk Lift Supports]: this lift support kit is a direct replacement for worn-out original trunk shocks of Scion tc: Extended Length from Center to Center: 17inch, Compressed Length from Center to Center:11inch.

[Best for Scion tc 2005-2010]: perfectly fit for 2005 2006 2007 2008 2009 2010 scion tc (Base Coupe & Spec Coupe), your rear trunk gate will no longer slam down and hit your head;

[Easy-To-Install Liftgate Lift Struts]: You only need a flathead screwdriver to replace in 5 minutes promptly without using any other tools, installation manual is included in the parcel;

🟥【Perfect fit C16-04154 24 lbs】ARANA 24lbs C16-04154 15 inch Gas Struts could be used as the exact replacement parts for a.r.e. truck topper canopy, pickup camper shell window, leer snugtop pickup truck cap, general jobsite box tool box, etc.;

🟧【Easy to install 15" struts】Pair (2 total) of 15 inch gas struts, Force 24 lbs/214 N per shock; Extended Length A [in]: 14.45 (between two holes), Compressed Length B [in]: 8.98 (between two holes), interchange part number: C16-04154, C16 04154;

🟩【Well made 15" shocks】ARANA C1504154 15" Gas Spring Shocks using high quality sealing material and thickened steel cylinder body, to ensure premium working performance and durable service life.

✅36 inch gas strut - Compatible with the following OEM Numbers: C1615953, C16-15953, if you have old struts, please check the OEM number to buy correctly;

✅C1615953 35.43 inch 100lb struts - ARANA 35 inch gas spring struts will work for the lid weighs between 85-110 lbs, side length ≥ 50 inch; Note: do measure the lid weight or check the oem number to buy correct items;

✅36 inch gas strut 100 lb - ARANA 36 inch gas strut shocks are widely used on heavy-duty tonneu cover, truck pickup bed cover, teardrop camper shell topper, RV kitchen door, trap door and other DIY builds, as long as the lid weight is between 85-110 pounds;

10 inch gas spring for tool box cabinet, 35 Lb/156 N per shock, 2 shocks included in 1 SET;

10 inch gas shock Pack of 2: Dimension (Center-to-Center): Ext. Length:10.00 Inch (254mm), Com. Length: 6.6 Inches (168mm)

Interchange part number: 4058,4058,8195695,012170,7835PB,40231035,40231540,SL10-35,ML10-35,SL-1035,SL-10-35,ML-10-35,SL10-35-1,SL-10351,SL-10-35-1,SL10-35-5,SL-10355,SL-10-35-5,SL30-35,ML30-35,SL-3035,ML-30-35,SL-30-35,SL30-35-1,SL-30351,SL-30-35-1,SL30-35-5,SL-30355,SL-30-35-5,SL1035,SL10351,SL10355,ML1035,SL3035,SL30351,SL30355,ML3035,RB8795961,95961.

✅ 7 inch 20lb gas strut - Extended Length: 7.5"(190mm), Compressed Length: 5.25"(133mm), Package include: 2 struts, 4 mounting brackets and 10 Screws. Intercharge part number: 4533BE, 4567QQ, 8195620, 8334IH, C1602584A, C16-02584A, C1615045, C16-15045, CS750-20, ML11-20, ML-11-20, ML31-20;

✅7.5 inch 20lb gas sping - You can use the gas spring on your cabinet door, Display Table, RV Cabinet, Sentry Safe Box, Toolbox Lid, display table and other light DIY builds! Measurement first required for your project lid before purchasing!

✅ 7.5 inch 20 lb gas shocks - A pair of shocks per package, Force 18lb Per Strut. Most suitable SUPPORT weight for ONE pair is 15-22 Pounds! Please choose 1 pair if your lid weighs between 15 and 22 pounds!

✅ Qty (2) 23inch Gas Replacement Struts -- 2 shocks each set; most SUITABLE support weight: 80 lbs - 110 lbs for one pair, if out of this range, please choose other pressure struts;

✅ 23 Inch 100lbs Gas Prop Shocks -- Extended Length A [in]: 22.7(576mm), Compressed Length B [in]: 13.6(345mm), The struts include the BALL ENDS & MOUNTING BRACKETS as the picture shown. Need not buy the mounting brackets seperately.

✅About Installation - ARANA 23" 100 pounds gas shocks struts are very easy to install with attached 4pcs L-type mounting brackets, after determining the mounting position, drill hole and fix the brackets, these 23 inch struts will help your furniture lid/door open and close easily and conveniently;

✅23 inch Gas Strut 200LB – Extended Length [in]: 22.7(576mm), Force 150LB/889N; Package contents: 2 * struts, 4 * L brackets, 4 * nuts, 1 * Installation Manual, if parts missing or defective, contact ARANA to help you!

✅MUST READ – This 23 inch 200lb shocks are suitable for the lid with weight between 170-220lbs, with size ≥36”; Note: DO measure the lid weight and size to avoid buying wrong products, if pressure or size unfit, contact ARANA to help you!

✅Buy Correctly from ARANA - ARANA 23” 200lb struts are specially designed for heavy lids of DIY builds, once parts missing/defective or unfit problem, DO let ARANA provide a new suitable set in time!

✅28" 200 Pounds Gas Shocks -- Compatible with the following OEM Numbers:100-175,100-200,12161,3100175,3100200,3100-200,8195618,AVM100-175,AVM100-200,AVM100-200ME,GS3100200,SE1000200ME,SE1000-200ME,SPD3100200,SPD-3100-200,ST280M200.NOTE: If the lid weight is less than 170lbs or more than 220 pounds, please choose other pressure struts!!!

✅28 inch 200 lbs Lift Supports -- 10 mm Metal End Fittings, Extended Length from Center Mount to Center Mount is 28 inch, 200 lbs Per Strut, 2 struts included for Each Set!DO NOT compress them by hands before installing, the struts could only be compressed after installing successfully!!!

✅28" 200 lb Gas Struts -- Long-size Gas Struts, VERY STRONG, suitable to use on sled trailer, large heavy-duty floor hatch door, trap door, outdoor well pit; fit for the lid with length 56inch at least and the lid weight between 170 - 230 pounds;;

✅20 inch gas strut 200lb - Extended Length A (Center-to-Center):19.7 inch(500.mm), Compressed Length B (Center-to-Center): 11.8 inch(300mm), Force 890N/200Lb Per Strut, 2 Struts Per Pair; Package contents: 2 * struts, 4 * L brackets, 4 * nuts, 1 * Installation Instruction;

✅20 inch gas shocks 200lb - ARANA 20" 200lb shocks will be suitable for lid which weight between 185-220lbs, side length ≥ 32 inch; Note: DO measure the lid weight to avoid buy wrong items;

✅20 inch lift support struts - ARANA 20" struts are designed with L type mounting brackets, all the ball ends and brackets could be unscrewed and rotated to suit for different installation demands;

✅ One Size Fits Most - Thread Size: 0.35 inch(9mm); Clip Distance: 0.39 inch(10mm); Bottom Diameter: 0.98inch (25mm)

✅ Powerful Function - Clamp securely holds weak or out-of-function lift supports in the extended position to allow access to the engine compartment or luggage area.

✅ Wide Application - The lift support clamp can be used on the hood, tailgate or hatch struts of most cars, especially in cold weather. The hood prop clamp is designed to fit for 14mm lift support and keep you from potential injury.

✅20 inch gas strut 150lb - Extended Length A (Center-to-Center):19.7 inch(437mm), Compressed Length B (Center-to-Center): 11.8 inch(300mm), Force 668N/150Lb Per Strut, 2 Struts Per Pair; Package contents: 2 * struts, 4 * L brackets, 4 * nuts, 1 * Installation Instruction.

✅20 inch gas shocks 150lb - ARANA 20" 150lb shocks will be suitable for heavy lids, with lid weight between 130-165lbs, side length ≥ 32 inch; Note: DO measure the lid weight to avoid buy wrong items;

✅20 inch gas springs - ARANA 20 inch 150lb struts are widely used on the heavy duty indoor/outdoor furniture such as RV bed, murphy bed,garbage box, generator house, trap door, floor hatch door, custom-built window, etc, as long as the lid weight is between 130-165 pounds;

✅20 inch gas shocks 100lb - ARANA 20" 100lb shocks will be suitable for heavy lids, with lid weight between 85-110lbs, side length ≥ 32 inch; Note: DO measure the lid weight to avoid buy wrong items;

✅20 inch gas strut 100lb - Extended Length A (Center-to-Center):19.7"(500mm), compressed length B (Center-to-Center): 11.8"(300mm),Force 445N/100Lb Per Strut, 2 Struts Per Pair; Package contents: 2 * struts, 4 * L brackets, 4 * nuts, 1 * Installation Instruction;

✅20 inch lift support struts - ARANA 20" struts are designed with L type mounting brackets, all the ball ends and brackets could be unscrewed and rotated to suit for different installation demands;

✅ Compatible with Ford Edge Hatch Struts - ARANA hatch struts 6120 are specially designed for the rear hatch of 2007-2014 ford edge, intercharge part number: SG304084 6120 237330;

✅ Exact OEM Replacement for You - Duarable performance proved by numberous customers, this rear hatch gas shocks is perfectly designed for you IF you have a saggy lift gate, your lift gate doesn't stay up and always hitting your head!

✅ Exact Replacement Parts - Extended Length A [in]: 22.06, Compressed Length B [in]: 14.31; Vehicle Location: Liftgate, pack of 2pcs are included in per package;

✅20 inch gas strut 80lb - Extended Length A (Center-to-Center):19.7"(500mm), compressed length B (Center-to-Center): 11.8"(300mm),Force 356 N/80Lb Per Strut, 2 Struts Per Pair; Package contents: 2 * struts, 4 * L brackets, 4 * nuts, 1 * Installation Instruction;

✅20 inch gas shocks 80lb - ARANA 20" 80lb shocks will be suitable for heavy lids, with lid weight between 64-88lbs, side length ≥ 32 inch; Note: DO measure the lid weight before ordering to avoid buy wrong items;

✅ 20 inch lift support struts - ARANA 20" struts are designed with L type mounting brackets, all the ball ends and brackets could be unscrewed and rotated to suit for different installation demands;

✅ Qty (2) 23inch Gas Replacement Struts -- 2 shocks each set; most SUITABLE support weight: 80 lbs - 110 lbs for one pair, if out of this range, please choose other pressure struts;

✅ 23 Inch 100lbs Gas Prop Shocks -- Extended Length A [in]: 22.7(576mm), Compressed Length B [in]: 13.6(345mm), The struts include the BALL ENDS & MOUNTING BRACKETS as the picture shown. Need not buy the mounting brackets seperately.

✅About Installation - ARANA 23" 100 pounds gas shocks struts are very easy to install with attached 4pcs L-type mounting brackets, after determining the mounting position, drill hole and fix the brackets, these 23 inch struts will help your furniture lid/door open and close easily and conveniently;