Best Bastion Shooting in 2026

PREMIUM QUALITY CUSTOM ALUMINUM GLOCK BACKPLATE, PERFECT REPLACEMENT FOR GLOCK MODELS 17-41, GEN 1-5: This Rear Cover Plate is designed to fit Models 17-41 & 45, GEN 1-5; EASY & QUICK INSTALLATION; Slide Back Plate made to snap perfectly in place allowing you to conveniently personalize yours aesthetic; fits Models G17 G19 G21 G22 G23 G24 G26 G27 G29 G30 G31 G32 G33 G34 G35 G36 G37 G38 G39 G40 G41 G45. NOT COMPATIBLE with G42, G43, G43X, or G48.

WON’T RUB OFF, LASER-ENGRAVED HIGH RESOLUTION ALUMINUM (NOT PAINTED ON) GLOCK SLIDE COVER PLATE: ‘Laser-Engraved’ makes a huge difference! Unlike other custom replacement for Glock Cover Plates that are painted on, Bastion LASERED & ENGRAVED this artwork so that it won't rub off or wear off over time.

ALUMINUM - PREMIUM HARD COAT ANODIZED Replacement Butt Plate for Glock that’s machined from the highest quality, hard coat anodized black T6 aluminum that stays tough and durable even when removed and replaced from time to time, giving you the extreme durability, you deserve. FANTASTIC REPLACEMENT FOR PLASTIC FACTORY PARTS | BASTION CRAFTSMANSHIP, Not only keeps your firing pin and the extractor plunger assembly in place, it also adds a little flair to your plain old plastic back slide cover.

PREMIUM QUALITY CUSTOM ALUMINUM BACKPLATE FOR GLOCK | SUPER EASY & QUICK TO INSTALL, NO GUNSMITH NEEDED: Custom Back Plate designed to FIT GLOCK GEN 1-5; Bastion’s Slide Back Plate snaps perfectly in place allowing you to conveniently personalize your device; made to FIT GLOCK MODELS G17 G19 G21 G22 G23 G24 G26 G27 G29 G30 G31 G32 G33 G34 G35 G36 G37 G38 G39 G40 G41 G45; NOT COMPATIBLE WITH G42, G43, G43X or G48.

WON’T RUB OFF, LASER-ENGRAVED HIGH RESOLUTION ALUMINUM (NOT PAINTED ON) SLIDE COVER PLATE FOR GLOCK: ‘Laser-Engraved’ makes a huge difference! Unlike other custom Rear Cover Plates for Glock that are painted on, Bastion LASERED & ENGRAVED this artwork so that it won't rub off or wear off over time.

MADE IN THE USA, PREMIUM HARD COAT ANODIZED T6 MACHINED ALUMINUM: Premium quality Butt Plate for Glock that’s machined from the highest quality, hard coat anodized black T6 aluminum that stays tough and durable even when removed and replaced from time to time, giving you the extreme durability you deserve.

Lightweight and Extremely Durable

Perfect and Consistent Cheek Weld

100% Made in USA

2 Sets of replacement barrel seals for all Remington 1100 & 11-87 20 Gauge STD/LT/LW/SP shotguns

Highest grade synthetic rubber o-rings with graphite coating replace old, worn, or cracked orings to provide a proper seal and restore gas system reliability. This is the same material used by Remington when your firearm left the factory.

Used to resolve blow back issues with 20 gauge gas ports for Remington 1100 & 11-87 shotguns

Genuine Issue (NSN#8465-00-001-6471)

ALICE LC-2

Made of nylon

easily converts monopod or tripod into shooting sticks

standard 1/4-20 or 3/8 threaded hole at the bottom

rubber and ABS plastic construction

GS 8-10 Brass Eyelets For installation in 0.250" - 1/4" holes

Mil-Spec (MIL-DTL-13924) Flat Black Oxide Finish

Join Leather, Kydex, Boltaron & Other Materials up to .267" total thickness

For all full size grips and slim grips not less than 0.188" (3/16") thick

Challis' quality is evident in the photos...LOOK CLOSELY AT THE EXTRA PHOTOS WITH GRIPS

Black stainless with beautifully polished face

ShotGun Mount for GoPro

Fixed mount will not move during recoil!!! Always parallel to barrel!

Compatible with all GoPro Cameras Hero 1,2,3,3+,4, 5,6 and 7 including the session 4 and 5.

The EZ Pistol Holder is a safe and efficient firearm holder for all your needs. Apply it to your Gun Safe, Nightstand, Desk, Car, and countless other locations for quick and easy access.

Fit Most Gun/Airsoft Sizes: Fitting Full Size, Sub-Compact, Mid-Compact, Compact, Compatible with Glock 17, 19, 20, 22, 23, 26, 27, 29, 34, 35, 43, 45, 48, | M&P Shield 9mm, .40, and .45 ACP | LC9 | Taurus Slim Line, PT111 | Springfield XD Series | Beretta | Bersa | Kahr Arms | Colt | Walther |

Our Built-In Velcro Strip can attach to any carpeted surface ensuring long, durable use . It also come with an Adhesive Velcro Strip to attach to non-carpeted surfaces for even more utility!

Glow-On Red *Gun Sights Paint, 4.6 ml vial presentation. Includes a glass vial with a 'glow dot for reference' on the cap, Instructions sheet, and applicator included all packed in a zip bag and staple/closed with a cardboard description label with extra instructions on the back of it. *Glow-On Red has a Medium Reddish glow and fluorescent warm red color. Please mix the paint well before each use.

First-time buyer? Get the GLOW-ON ORIGINAL has the brightest glow. Available in 8 different colors: Original (Super Bright glow) Green, Aqua, Yellow, (Bright glow) Orange, Red, (Medium glow) Blue and Pink (Soft glow).

Super Concentrated: Twice the glow particles than the competition and half the amount of binders. Professional grade. Super opaque, it covers dark surfaces. It contains its own primer. dries in a few hours, and cures after a couple of days. The glow cycle can be repeated infinitely for a period of 15 years.

PREMIUM QUALITY CUSTOM ALUMINUM BACKPLATE FOR GLOCK | SUPER EASY & QUICK TO INSTALL, NO GUNSMITH NEEDED: Custom Back Plate designed to FIT GLOCK GEN 1-5; Bastion’s Slide Back Plate snaps perfectly in place allowing you to conveniently personalize your device; made to FIT GLOCK MODELS G17 G19 G21 G22 G23 G24 G26 G27 G29 G30 G31 G32 G33 G34 G35 G36 G37 G38 G39 G40 G41 G45; NOT COMPATIBLE WITH G42, G43, G43X or G48.

WON’T RUB OFF, LASER-ENGRAVED HIGH RESOLUTION ALUMINUM (NOT PAINTED ON) SLIDE COVER PLATE FOR GLOCK: ‘Laser-Engraved’ makes a huge difference! Unlike other custom Rear Cover Plates for Glock that are painted on, Bastion LASERED & ENGRAVED this artwork so that it won't rub off or wear off over time.

MADE IN THE USA, PREMIUM HARD COAT ANODIZED T6 MACHINED ALUMINUM: Premium quality Butt Plate for Glock that’s machined from the highest quality, hard coat anodized black T6 aluminum that stays tough and durable even when removed and replaced from time to time, giving you the extreme durability you deserve.

BEST QUALITY CUSTOM ALUMINUM MAGAZINE BASE PLATE FOR GLOCK | SUPER EASY & QUICK TO INSTALL: Custom Mag Floor Plate designed to FIT GLOCK GEN 1 2 3 4 5; Bastion’s Magazine Plate hole in center of base plate design snaps perfectly in place allowing you to conveniently personalize your device; made to FITS GLOCK MODELS G17 G19 G22 G23 G24 G26 G27 G31 G32 G33 G34 G35 G37 G38 G39 G45; FOR CALIBERS: 9mm (9X19) .40 .357 .45gap

WON’T RUB OFF, LASER-ENGRAVED HIGH-RESOLUTION ALUMINUM (NOT PAINTED ON) MAG PLATE FOR GLOCK: ‘Laser-Engraved’ makes a huge difference! Unlike other customs Magazine base for Glock that is painted on or stickers, Bastion LASERED & ENGRAVED this artwork so that it will not rub off or wear off over time.

PREMIUM HARD COAT ANODIZED T6 MACHINED ALUMINUM METAL: Premium quality for Glock accessories that are machined from the highest quality, hard coat anodized black T6 aluminum that stays tough and durable even when removed and replaced from time to time, giving you the extreme durability you deserve.

Gives perfect and consistent cheek weld for your rifle

Extremely light weight (6 Oz)

100% Made and manufactured in the USA

Full grain tumbled drum dyed leather

- Will get butter soft with use

Roomy enough for wallet, brush, glasses, keys, small book

Color:Green

Fits all the following Mosin Nagant rifles and carbines: M38, M39, M44, M53, 91/30, 1891/30, Dragoon

Minimal to zero "drag" until retention point keeping "holster wear" down to a minimum.

Comes with a 1.5" Quick Clip that makes it extremely fast and easy to put on and take off your weapon.

Adjustable cant (angle) from 0-30 degrees. Forward hole is oblong to allow for you to choose any angle between 0-30 degrees.

Brand New & Factory Original! Ammo Ready For Plinking!

Durable stainless steel construction

Adds grip control to firearm

Left or right side mounting

for Glock 43 9MM Rear Slide Cover Plate Black

1000+ High Resolution Permanent Laser engraved images, will not rub off, not painted, custom engraving too - by NDZ Performance

100% Aircraft Grade T6 Billet Aluminum, Mil-spec Hardcoat Anodized Durable Finish

USBR Adjust to wear on the Strong Side or CROSS-DRAW. Made from Premium Genuine Leather. Hand-made molding for a perfect fit. The retention strap helps keep the gun securely in place. Retention strap has a snap closure on the front of the holster. Plastic tab on the holster strap provides fast pulls. Adjustable tension screw for customized retention.

Sight rail space to protect the leather and muzzle sight. Has a moving polymer paddle to adjust the carrying angle. Using 2 screws on the polymer paddle the holster can be easily switched between horizontal and vertical stances. Paddle design makes it easy to put on and off. May be used with or without a belt. Fits up to 4 - 4.5 cm belts.

PLEASE NOTE: THE HOLSTER MAY APPEAR TO FIT TOO TIGHT AT FIRST AND WHEN HOLSTERING YOUR GUN THE FIRST TIME; THIS IS FOR LONG USAGE OF YOUR HOLSTER, CONSIDERING THE FACT THAT THE LEATHER WILL RELAX WITH USE.

Compatible with Glock 43 9x19mm Model ONLY

NOT compatible with Glock 43X and Glock 48

Hard coat anodized black T6 machined aluminum

Home Defense Fiber Optic Universal Shotgun Sight Red & Green

Snap-on Fiber Optic Front Sight for Shotgun Barrel - 12 / 20 Gauge - RED & Green

Ready to use, just clip onto barrel shotgun and push up to the bead sight. This will make a big difference for how quickly you can pick up a target - especially in low light conditions. A great, low-cost addition to your shotgun.

Black Leather Construction

Weimar republic stampings for prewar authenticity.

Internal pockets and straps for take down tool and cleaning rod.

Adjustable strap, perfect for any suppressor of 7 inches long

Stop mirage while shooting long distance.

Light weight, easy to carry

P08 Luger Tool

Used to Field Strip the pistol

Helps load the Magazine

Basket Weave Embossed: Elegant design that gives the belt a whole new look. In the standard size width of 1.5 inches to make sure our belts fit through most belt loops out there with no problems at all.

English Bridle Leather: Only made from the highest quality pieces of leather as our customers deserve a quality belt that looks good, feels good, and will last! Two Strips of this high quality leather are used to form the exterior of your belt which is twice as much leather as many belts on the market.

Dual Layered Leather: Although with no steel core inside this belt, using two layers of solid leather makes for a very solid belt still. This is a great option for someone that still wants a very high quality belt but doesn't need the rock solid rigidity that our steel core provides!

Adjustable strap, perfect for any suppressor of 5 inches long

Stop mirage while shooting long distance.

Light weight, easy to carry

100% Stainless Steel

2 gun rests per pack

Extends out to 40 inches ~ Adapts to any size/shape window

Uses a 75 watt incandescent bulb

Project and magnify clearly any picture, photo, or drawing up to 5 times.

Great item to project any image to multiple craft and art projects.