Best Acrylic Shower Pans in 2026

Model Size: 32 in. D x 54 in. W x 2 3/4 in. H

Base Type: Single Threshold (3-Wall Alcove)

Drain Location: Center (Centered on width only; See technical drawing for exact location); Color: Black

Actual product dimensions 59.88 in. W x 30.75 in. D x 3.5 in. H

Fits alcoves 60 in. x 32 in.

Premium high-gloss non-porous acrylic surface is durable and easy to clean

All Proflo products are factory tested before disbursement - 100% guaranteed to function flawlessly

These bases may be used in a custom shower project or combined with a shower enclosure for a complete shower installation

Drain is located in the center of the shower pan

Premium Shower Tray: Our shower curb kit provides you a shower tray made of EPS high-pressure foam board. Overall size: 38 in × 60 in (965.2 mm × 1524 mm). The drainage hole is set in the middle with a 4 in (10 cm) diameter for effective water running. The shower tray is equipped with a gray water-impermeable membrane with fluffy texture on the surface, convenient for mortar brushing. The tray forms a 5° inclination from four sides to the middle, which is convenient for drainage.

Drainage Accessories: The shower curb overlay includes a durable PVC flange and auxiliary drainage device (fit for 2 inch pipes) to ensure smooth water flowing. With a gravity automatic seal grate, pipes won’t be blocked. In addition, we offer 2 shower curbs with the size of 38 in × 4.5 in × 6 in (965.2 mm × 114.3 mm × 152.4 mm). Adopting XPS plastic extruded board, 2 shower curbs are easy to cut and can be adjusted according to the actual needs of the length.

Water Impermeable: 2 rolls of HDPE material water-impermeable membrane are included in our shower base kit. Small roll size: 5 in × 32.8 ft(12.7 cm × 10 m). Large roll size: 3.3 ft × 32.8 ft(1 m × 10 m). You are allowed to choose the membrane for different areas of the wall or floor. For your quick use, 4 inside corners and 2 outside corners of the membrane are provided without time-consuming cutting.

One-piece, pre-pitched shower pan with integrated curb, splash walls, and 2" PVC drain

Dimensions: 48-Inches D x 48-Inches W x 6.75-Inches H, 48-Inch Depth measured from the front of the curb to the outside of the back splash wall

Single Curb on 48-Inch Front (Width) Side – Shower curb measures 4.25-Inches H x 4.56-Inches W

Low-threshold design for easy entry and exit

Molded-in textured floor

Water containment bead incorporated into the threshold design provides an optimum barrier, eliminating water escaping from the shower space

DURABILITY - Made from scratch-resistant ABS acrylic for maximum durability

STYLE OPTIONS - Choose from multiple shower and tub upgrade solutions. Acrylic is 20-25% lighter than fiberglass

DIY INSTALLATION - All of our bathroom upgrades are easy to install so you can upgrade your home or RV effortlessly

✅️【Shower Base Dimensions】- 48’’L x 32’’W x 4''H, 45.2 lb. Right Drain Material: Sheet molding compound.

✅️【Premium Shower Pan】- Made from Sheet molding compound,light weight, corrosion resistance, water resistance, insulation, bending resistance, heat resistance, durability.

✅️【Quality Drain Cover】-304 Right Trench Stainless Steel Drain, prevent water from splashing.

Non-toxic and fume free, safe to apply

Fast and Easy to use with professional looking results, perfect for touch ups!

Upgraded High-Output LED Light

Size&Materials: 35.5x35.5x3.5 in (After install), made of high quality enviromental Acrylic,Drain is also included.

White finish surface, heat resistance, corrosion and wear resistance,provides an extra long service life.

Better structure design and solid material for better weight endurance and durability.

✅ [ PRODUCT DIMENSION ] : 60 in. W x 36 in. D x 5.5 in. H - Interior depth of up to 2.5 inches

✅ [ HIGH QUALITY MATERIAL ] : Easy to handle RHINO ALLOY certified marine grade acrylic and yield fiberglass

✅ [ INSTALLATION ] : Three (3) sided integrated tile flange for 3-wall alcove installation

✅ [ PRODUCT DIMENSION ] : 60 in. W x 36 in. D x 5.5 in. H - Interior depth of up to 2.5 inches

✅ [ HIGH QUALITY MATERIAL ] : Easy to handle RHINO ALLOY certified marine grade acrylic and yield fiberglass

✅ [ INSTALLATION ] : Three (3) sided integrated tile flange for 3-wall alcove installation

🌟Model Size: 60in. L x 32in. W x 3 1/2in. H.

🌟Non-slip: Textured floor surface provides slip-resistance for safety, qualified acrylic for easy maintenance and clean. Multilayer construction with stain resistant surface, durable fiberglass reinforced Acrylic/ABS materials.

🌟Drain Location: Right (See attached drawing for exact location).Drain hole cut to fit standard 2 in. drain (Drain not included).

[MODEL INFORMATION] Adena shower base comes in 36 inches Depth x 72 inches Width x 2 8 inches Height in white finish with reinforced acrylic

[YOUR SAFETY FIRST] This shower base features an anti-skid texture providing a safe surface slip-resistance

[DRAIN LOCATION] This shower pan features a stylish side hidden drain allowing rapid evacuation of water All Ove bases can be installed with left or right orientation

【Fit the Wall Perfectly】Reject ugly fillers.The shower splash guard combined the design of silicone and acrylic, which can meet the 90°-105° angle demand between the bathtub and wall. Honitra shower water guard provides you and your family with a good bath environment.

【Super Waterproof】Honitra strong adhesive shower water guard is specially designed for your bathtub, which brings you a 0 water seepage experience. To make sure the waterproof effect of the bathtub corner splash guard, Honitra used a special waterproof adhesive for the shower water blocker, which is more waterproof on the basis of beauty.

【Robust & Durable】Honitra Shower corner water guard is designed with a combination of technology and aesthetics. The splash guard was made of acrylic which is not easy to deform, and abandoned excessive color which is clean but transparent. You can enjoy your bath relax time with the Honitra shower guard.

Low single threshold, for easy access

High gloss white acrylic, with fiberglass reinforcement

Integral 3-sided flange to prevent water leakage

✅ [ PRODUCT DIMENSION ] : 36 in. W x 36 in. D x 5.5 in. H - Interior depth of up to 2.5 inches

✅ [ HIGH QUALITY MATERIAL ] : Easy to handle RHINO ALLOY certified marine grade acrylic and yield fiberglass

✅ [ INSTALLATION ] : Two (2) sided integrated tile flange for corner installation

Dimension: 36 in. D x 36 in. W x 3 in. H Finished type: Acrylic single drain, Color: White

Safety Non-Slip design, surface anti-skid texture, avoid felling on it

Premium steady bearing capacity, durable and not easy to broken

6-Inch height

Tru-level support system

Integral tile flange

Acrylic construction with fiberglass and resin reinforcement

Single threshold for three-wall installation

Textured slip-resistant flooring for a stress-free bath

SHOWER BASE DIMENSIONS:48" L x 36" W x 4" H, Drain Location: Left, Stainless Steel Cover

DURABLE SHOWER PAN MATERIAL:Made of corrosion resistant Acrylic/ABS materials with a non-slip surface , reinforce and durable . No mold no mildew and easy to clean shower pans.

304 STAINLESS SHOWER DRAIN: Premium anti-rust material with 304 stainless Trench Drain Cover , durable and leakproof

Product Size: 62X36in

Quality Material: High Grade Acrylic with yield glassfibre

Barrier Free threshold with center drain, and drains provided with 2 different surface and style to allow your different choices.

Low-threshold design for easy entry and exit

Molded-in textured floor

Water containment bead incorporated into the threshold design provides an optimum barrier, preventing water from escaping from the shower space

Low-threshold design for easy entry and exit

Recessed rear drain

Single threshold for three-wall or alcove installation

Low-threshold design for easy entry and exit

Single threshold for alcove installation with integral tile-in flange

Durable acrylic with resin concrete core construction

Covered under Miseno's 5 year limited

High gloss white acrylic surface

Integrated tile flanges make installation and waterproofing a breeze

SHOWER BASE DIMENSIONS:48" L x 36" W x 4" H, Drain Location: Center, Stainless Steel Cover

DURABLE SHOWER PAN MATERIAL:Made of corrosion resistant Acrylic/ABS materials with a non-slip surface , reinforce and durable . No mold no mildew and easy to clean shower pans.

304 STAINLESS SHOWER DRAIN: Premium anti-rust material with 304 stainless Trench Drain Cover , durable and leakproof

Model Size: 60 in. L x 32 in. W x 3.5 in. H.

Basic Type: Double threshold. Integrated tile flanges on Right side and backside for 2 sides wall installation.

Drain Location: Center (See attached drawing for exact location). Drain hole is cut to fit standard 2 inch drain (drain not included).

DIMENSIONS: 48-in L x 32-in W with a 3-inch threshold

MATERIAL: Transtone is a sheet molded compound material constructed of many solid layers of a glass reinforced polymer resin creating a beautiful slate finish with 4 times the impact resistance of other bases and 2.5 times the temperature resistance.

INTEGRAL TILING FLANGE: A substantial 1 in. tiling flange ensures no water will sneak in the cracks between your shower base and walls

DURABILITY - Made from scratch-resistant ABS acrylic for maximum durability

STYLE OPTIONS - Choose from multiple shower and tub upgrade solutions

DIY INSTALLATION - All of our bathroom upgrades are easy to install so you can upgrade your home or RV effortlessly