Best Ceiling Mounted Speaker Mounts in 2026

Compatibility: Dual sound bookshelf satellite speaker mount brackets built to be mounted on stud, concrete or brick/stone walls. Max. Capacity: 55 lbs (25kg).

Versatility: Adjustable Tilt up and down 7.5 degrees, Swivel left and right 45 degrees, width of speaker should between 5.5 to 11 inches.

Sleek: The modern knob design is complemented by a sleek reinforced black coat for a contemporary appearance while immersing in optimum listening experience.

SPEAKER WALL MOUNT BRACKET – Pair of heavy duty side clamp speaker wall mount brackets for medium to large bookshelf speakers, satellite speakers and studio monitors and amplified speakers weighing less than 25kg/55lbs.

UNIVERSAL FIT - Built for heavy speakers, bookshelf speakers, surround sound or even lighter smaller speakers. The width of the speakers should be between 5.4 to 11 inches. Fits YAMAHA, BOSE, KLIPSCH, POLK, ONKYO, SONY and other brand speakers. ALLOWED SPEAKER WIDTH 5.38" MIN TO 11.13" MAX.

ELEGANT AND STRONG - Constructed with solid steel and decorated with ABS cover and cable management, it presents an elegant look especially when installed at home.

With the ECHOGEAR soundbar TV mount you'll be mounting your soundbar directly to the TV, allowing the sound to move with your wall mounted screen for an upgraded, movie-like viewing experience. Time to stream Top Gun 2!

Universal design, this mount works with rear and bottom mounted soundbars up to 15lbs, so your Samsung, Vizio, LG, and Bose soundbar are all compatible! It can be installed on TVs with rounded or flat backs

Everything is included with this TV soundbar mount kit, including high-quality hardware, meaning no last minute trips to Home Depot! Plus, the install is a breeze thanks to our DIY-friendly instruction manual.

Fit most speakers weighing up to 10lbs (4.5 kg). Thread size: 1/4" 20 thread, or 4mm, 5mm. Fits key holes mounting.

Perfect adjustment: tilt +/-30 degrees, 180 degrees pan and rotate 360 degrees

Ideal for mounting home theater satellite speakers on ceiling or wall (drywall/rocksheet)

Fits most satellite speakers weighing less than 10 lbs(4.5 kg). Thread size: 1/4" 20 thread, or 4mm, 5mm. Fits key hole mounting.

Ideal for mounting home theater satellite speakers on ceiling or wall (drywall/rocksheet)

Ball and clamp design provide flexible tilt, pan and rotate adjustment

Enhance your musical experience in under 15 minutes by mounting your satellite speakers anywhere on the wall or ceiling! Requires a keyhole or threaded insert mounting hole on the back of your speaker.

These mounts are built to tilt and swivel, allowing you to adjust your speaker to create the most perfectly angled sound for your unique setup.

Comes with brackets to fit most satellite and bookshelf speakers weighing up to 8 lbs. Included in the box are all the screws you could possibly need, so don’t worry about making that extra trip to the hardware store.

Compatibility: dual sound speaker mount brackets built to be mounted on ceiling or wall for maximum compatibility for most bookshelf satellite speakers

Universal design: ideal for home theaters, offices, Living rooms, bedrooms, Studios, schools, dorms, events, houses, public areas, hotels, lobbies, etc.

Sturdy construction: the modern design is complemented by a sleek reinforced Black coat for a contemporary appearance. Max. Capacity: 7.7 lbs. (3.5kg).

Compatibility: Dual sound bookshelf satellite speaker mount brackets built to be mounted on stud, concrete or brick/stone walls. Max. Capacity: 55 lbs (25kg).

Versatility: Adjustable Tilt up and down 7.5 degrees, Swivel left and right 45 degrees, width of speaker should between 5.3 to 11 inches.

Sleek: The modern knob design is complemented by a sleek reinforced black coat for a contemporary appearance while immersing in optimum listening experience.

Supports up to: 10 lbs. (4.5 kg)

Thread size: 1/4" 20 thread, or 4mm, 5mm. Fits key hole mounting.

Adjustable +/-30 degree tilt, 180 degree pan and 360 degree rotation

Design: Soundbar center channel speaker mount brackets built to be mounted on any wall for maximum compatibility. Ideal for home theaters, offices, living rooms, bedrooms, studios, schools, dorms, events, houses, public areas, hotels, lobbies, etc.

Multiple Adjustments: Arms will extend 4 to 6.5 inch from the wall. Multiple adjustments allow you to create perfect, concert hall sound quality, from the comfort of your home, office, public areas, etc.

Sturdy Construction: The modern design is complemented by a sleek reinforced black coat for a contemporary appearance. Weight capacity up to 33lbs.

Ideal for mounting home theater satellite speakers on walls or ceilings

Supports speakers weighing 8 pounds or less

Made of durable, weather resistant, injection molded fiber resin reinforced polymer

Wall and Ceiling Mount compatible with home theater satellite speaker and bookshelf speakers. Package includes 2 speaker brackets.

Made from steel and aluminum, this heavy duty speaker mount is rated to carry speakers up to 33 lbs

Steel security cable offers theft resistance and provides additional mounting safety

FITS PERFECTLY: This dual wall / ceiling speaker Mounts by Pyle is compatible with virtually any standard speakers on the market. Its retractable telescopic arm extends from the wall by 3.9" - 11 inch. Ideal for home theater, stage, recording studio

UNIVERSAL MOUNT: The speaker holder pair was designed to be universally mounted on any flat surface and the unique mounting mechanism allows angle / tilt adjustments. Perfect for home surround sound system, bookshelf, satellite speakers

BUILT TO LAST: Features heavy duty reinforced solid formed steel construction in black finish and comes with durable, rugged, reliable mounting assembly kit that you can easily install within minutes and can last through numerous uses and application

2 In 1 Design: This mount not only can as a wall mount but also can as a ceiling mount. Its design for Logitech 5.1 surround sound satellite speaker, both 5 pcs satellite speakers can use this bracket to install it.

Length Adjustable Design: This Bracket can adjust the length by installing or removing wall poles.The long type can as a ceiling mount, the short type can as a wall mount.

Multiple Adjustments Direction: Through loosened and tightened the side screw to achieve tilt & swivel adjustable (swivel +90° to -90° (Left to Right) and tilt of +90° up, -90° down), after the side screw tightened,the mount's direction is fixed and can’t adjust.

【Suitable for】 bose speaker 5.1 home entertainment systems .a leisurely Lifestyle SoundTouch 535 525 520 ,SoundTouch systems including ST535 ST525 ST520 535III 525III CM520

【2 In 1 Design】 This mount not only support mounted to the wall but also to the ceiling. 2 types length both support install to the wall or ceilingWhere to install your speaker just depend on your choice. Length Adjustable Design: This Bracket can adjust the length by installing or removing wall poles.

【Multiple Adjustments Direction】 Support Tilt & Swivel adjustable up and down & right andleft adjustment.Exquisite workmanship，Crude scrub and glaze light surface,touch smooth. Glaze light multilayer reinforcing brackets,waterproof and dustproof.All hooks are made of rounded corners, easy to install. packaging in place

SAFE AND SECURE: Robust design with heavy-duty steel to have extra load bearing up to 90 lbs Securely mount your speakers especially large speaker over 12'' anywhere within 15 minutes;

FLEXIBLE INSTALL: Speaker ceiling mount/wall mount with horizontal adjustable in 360°, tilt up and down in 90° for your speaker to tilt or swivel for perfectly-angled sound;

ELEGANT AND STRONG: Solid steel with sleek reinforced black finish, sturdy and reliable for large bookshelf speaker or center channel speakers;

【Convenient installation】: The speaker mounts can be installed on the ceiling, which can be tilted up and down by 90°, and the level can be adjusted 360°, so that your speakers can get a perfect angle of sound

【Safe and reliable】: Made of solid steel, it can withstand additional loads of up to 100 pounds.

【Universal and compatible】: This ceiling speaker mount is almost compatible with most 8" 10" 12" 15" speakers on the market

Crafted from premium steel, the universal SANUS Soundbar TV Mount SBM2 securely mounts soundbars weighing up to 15 Lbs directly to your TV wall mount, right under your TV.. Thoughtfully designed, this soundbar mount works with rear and bottom-mounted soundbars including popular brands such as Samsung, Roku, Bose, Vizio, LG, and more.

The SANUS soundbar mounts SBM2 is Dolby Atmos compatible. Indeed, the soundbar depth can be adjusted to prevent TV blockage of ceiling-deflected sound. It also features tool-free, effortless height adjustments to customize your listening experience by placing your soundbar right where you want it. It is as easy as simply loosening the bracket knobs to adjust and tighten with the included hex key to secure it in place.

When attached to a full motion tv mount, the sound moves in symbiosis with your TV mount. Thanks to this feature you will always get the perfect angle-sound from any seat in the room.

【Wide Compatibility】Pipishell speaker mounts fit most surround sound and bookshelf speakers 5.9″ - 11.2″ wide thanks to the adjustable clamping bracket. The speaker mount pair is designed to be compatible with most speaker brands on the market and can be installed on concrete walls, single wood studs, and brick walls.

【Ideal Speaker Positioning】The knob design and the arm length is 9.10" to enjoy a better sound experience. Simply direct the bookshelf speaker wall mount using the tool-free adjustment including +/-10° tilt, +/-45° swivel, and 360° rotation for a wide range of flexibility, and can be installed in the corner.

【Stability & Durability】The wall speaker mount has an ultra-strong, heavy-duty steel frame and reinforced wall plate. It provides maximum support for speakers up to 50 lbs. The speaker mounting brackets has anti-slip pads to keep speakers in place without scratching.

Universal Speaker Mounting Bracket: Designed for most of wall mounted speakers with 1/4 inch-20 thread hole. Such as for Roku wireless speaker, Klipsch, JBL speaker, Vizio speaker 5.1, Polk speaker, Sony surround sound speaker and Samsung rear speaker etc. (Please Note: Only fit for the speakers with 1/4 inch-20 thread hole).

Wall and Ceiling Mount: 2-in-1 speaker bracket design, let your audio installation add more choices; The long type is perfect to mount on the ceiling and the short type is perfect to mount on the wall, Securely mount your satellite speakers to anywhere on the wall or ceiling, which depends on your choice.

Multiple Adjustments Direction: Tilt & Swivel 180° adjustable (90°+/- up and down) & (90°+/- right and left) adjustment, you can through loosened and tightened the side screw to achieve an optimal listening experience. Notice: After the side screw tightened, the mount's direction is fixed and can't adjust.

Load-bearing bridge evenly distributes weight within drop ceiling system

Eliminates ceiling tile sag & securely supports speaker weight

Round cut-out to accommodate 8” in-ceiling speaker

Compatibility: This steel under-cabinet mounting bracket works well for Echo Show 15 (device not included). It is compatible with VESA mounting holes 75x75mm or 100x100mm. Max Capacity: 44lbs.

Space-saving: Foldable design allows your device to be stowed under cabinet, clears up valuable counter space. Compact design complements your modern furniture and keeps your kitchen neat and clean.

Adjustment: Under cabinet kitchen mount bracket for echo show 15 allows +45°/-45° swivel and 2.3 inches height adjustable range. The entire stand can be folded back 90°. The device can be flexibly and smoothly adjusted for a better viewing experience.