Best Libra Spindles in 2026

Adapter for rave drain fittings.Fit Type: Universal Fit

3" bayonet lug fitting x 3" slip hub

Connects a sewer hose or cap

Replace: for axle hub grease caps, Axles Dexter 85-1, 085-001-00, Tiedown Engineering 88174, and AL-KO 085-016-0

Compatible with: Dexter 21-31-1, Redline RG04-040, Tiedown Engineering 81168 & AL-KO 021-041-01

Features: Preserves Grease Life and Prevent's Impurities From Entering the System

Fit Type: Vehicle Specific

【WITH EXTRA 4 SEALS】- You will receive 4pcs 2.72 inches trailer axle covers & 4pcs extra rubber plug, enough to meet your daily use or replacement. The extra 4 rubber plugs can be used as spare parts in case of emergency. This is a value-for-money set!

【HEAVY DUTY & ANTI-RUST】- These trailers dust caps are made of high quality steel and rubber, surface zinc-plated, strong and durable, not easy to deform, anti-corrosion & anti-rust, long-term service for your Trailer.

【PRACTICAL TRAILER PARTS】- The trailer axle cap is designed to avoid the trailer axle from dust, preserve the grease, prevent axle corrosion and as decoration. Hub grease caps are designed with removable rubber plugs, easy to install and maintain.

Cast galvanized wheel hub kit for boat trailers

Kit includes pre-greased bearings, seals, dust caps, lug nuts and a cotter pin

5 UHI lugs on a 4.5" bolt pattern

4 inner bearings L68149 ID 1.378'' and 4 inner races L68111 OD 2.362'';

4 outer bearings L44649 ID 1.063'' and 4 outer races L44610 OD 1.980'';

4 double lip grease seals 10-19 (171255TB) 1.719'' x 2.565''.

1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle.

Spindle includes spindle nut, spindle washer, and cotter pin.

4-4" BT8 hub pre raced and studded.

4-pack Grease Cap Plugs for EZ Lube Grease Caps

Rubber Lube plugs for 1.18" dust cap hole

Dexter EZ Lube Grease Cap

Complete assembly with bearings, seal, dust cap, cotter pin and lug nuts

Fits both 1" and 1-1/16" diameter straight spindles

Hub measures 4-1/4 inches tall (through center of hub)

By relocating the wheel mounting point a.k.a. spindle pin higher on the spindle casting, our engineers were able to provide a 2-3" lowering without affecting any other suspension or steering geometry, not even the shock absorber

Belltech Drop Spindles offer a 2 or 3 inch drop depending on the application

While improving handling and retaining factory ride quality; Belltech spindles maintain critical suspension geometry and eliminate excessive ball joint, shock and tire wear common to other methods of lowering

Set of 2 New trailer idler hub kits 5 on 5" for 3,500 lbs trailer axle

Bolt pattern: 5 on 5", bearing races and 1/2"-20 studs installed

Kits also includ: 2x L68149 inner cone bearings and 2x L44649 outer cone bearings, 2 x Grease seals 1.719" x 2.565", 2 x E Z lube grease caps with rubber plugs; 10 cone wheel nuts 1/2"-20 thread

Sufficient Wheel Replacements for You: you will receive 4 pieces of trailer hub caps with 4 pieces of rubber plugs, enough to meet your daily use or replacement, can be stored for a long term, and can be also shared with friends or relatives who have a trailer

Notable Size Details: our trailer axle grease cap measures about 1.98 inches in diameter, 1-7/16 inch high, and the rubber plug is about 1.5 x 1.5 x 0.2 inches, fit for 2,000 to 3,500 lb trailer wheel hubs

Quality Material Selection: our trailer bearing dust cap is made of iron, a galvanized surface, sturdy and tough, strong against breakage and deform, corrosion and rust, serving your trailer for a long time

Set of 2 New trailer idler hub kits 5 on 4.5 for 3,500 lbs trailer axle

Bolt pattern: 5 on 4.5", bearing races and 1/2"-20 studs installed

Kits also includ: 2x L68149 inner cone bearings and 2x L44649 outer cone bearings, 2x Grease seals 1.719" x 2.565", 2x E Z lube grease caps with rubber plug; 10 cone wheel nuts 1/2"-20 thread

1.This tool helps you remove the hub assemblies quickly and safer without damaging the axle.

2.There are enough flange bolts in the package to meet your needs as much as possible.

3.Simple Operation:Find the flange nut that suits you, then fix the 8629 hub removal tool on the hub, and then hit the end of the tool with a hammer until the hub is loose, then you can easily remove the hub

【HEAVY DUTY 】These dust caps are made of high quality carbon steel and rubber, surface zinc plated, strong and durable, not easy to deform, corrode or rust.

【WITH EXTRA 2 SEALS】 2 caps meet your daily use and extra 2 seals will be a reserve in case you get into trouble.

【DIMENSION】OD: 1.98 inch/ 50.4 mm.Please check the size information and compatibility carefully before placing an order.

✔️ [Fitment] - Trailer Axle Hub Dust Cover Grease Cap with 1.98" OD.

✔️ [Trailer Type] - 2000 lbs to 3500 lbs Axles

✔️ [Features] - Long Lasting Durability

4 studs 4" bolt circle using L44649 inner and outer bearings.

Contains TruRyde inner bearing, outer bearing, seal, grease cap and lug nuts.

Fits a BT9 Spindle (1 1/16" OD). All studs are 1/2"-20 with yellow finished zinc plating.

Drive-In Style (Typically used on NON-EZ Lube Hubs) with 1.98" Outside Diameter

Fits for Trailer Axle Hub Dust Cover Grease Cap with 1.98" OD.

For 2000 lb to 3500 lb Axles Zinc coated EMMMSUN .

1750 Lb 5 Bolt Hub Kit

Kit Includes (1) 5-Lug Hub (5) 1/2" Lug Nuts (1) Dust Cap

Fits Most Trailers With 3,500 Lb. Rated Axles

Replacement (Pack of 2) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle

Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information

Includes - (2) Idler Hub with Lug Nuts, (2) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (4) Inner/Outer Bearings, (2) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (2) 2" Grease/Dust Cap; comes as shown in the first image

BLACK RUBBER GREASE PLUG (10 Pack )

Hub Dust Caps for Dexter EZ Lube Trailer Camper Axle

Specs - Outside Diameter: 1.3" Inside Diameter: 0.97"

Direct replacement - this spindle nut matches the fit and function of the factory part on specified years, makes and models

Ideal solution - this nut is a reliable replacement for an original part that is missing or has failed due to fatigue

Durable construction - this part is made from quality materials to ensure reliable performance and long service life

Set of 2 New trailer idler hub kits 6 on 5.5 for 5,200-6,000 lbs trailer axle

Bolt pattern: 6 on 5.5", bearing races and 1/2"-20 studs installed

Kits also includ: 2x 25580 inner cone bearings and 2x 15123 outer cone bearings, 2x Grease seals 2.25" x 3.371", 2x E Z lube grease caps with rubber plug; 12 cone wheel nuts 1/2"-20 thread

Application:Fits Trailer Axle Hub Dust Cover Grease Caps

Introduce:Drive-In Style (Typically used on NON-EZ Lube Hubs)

Specification:1.98" Outside Diameter

Direct replacement - This spindle lock nut kit includes hardware designed to match, on specified vehicles, the original nut, washer and retainer

Ideal solution - this kit is a reliable replacement for original components that are missing or have failed due to wear

Durable construction - this kit features quality parts to ensure reliable performance and a long service life

TRAILER HUB KIT - M-Parts Set of 2 Trailer Idler Hub Kits 5 on 4.5” for 3,500 lbs Axle

BOLT PATTERN - 5 on 4.5” bolt pattern idler hub with 1/2”-20 studs and bearing races installed

HARDWARE - L-68149 inner bearing- (1-3/8" inside dimension) / L-44649 outer bearing- (1-1/16" inside dimension), Grease seal - (2.56" O.D - 1.72" I.D)/ EZ Lube Dust cap - (1.98" outside dimension), 10 Lug nuts (1/2”-20)/ Cotter Pin

TRAILER HUB KIT - M-Parts Trailer Idler Hub Kits 5 on 4.5' for 3,500 lbs Axle

BOLT PATTERN - 5 on 4.5' bolt pattern idler hub with 1/2'-20 studs and bearing races installed

HARDWARE - L-68149 inner bearing- (1-3/8 inch inside dimension) / L-44649 outer bearing- (1-1/16 inch inside dimension), Grease seal - (2.56 inch O.D - 1.72 inch I.D)/ EZ Lube Dust cap - (1.98 inch outside dimension), Lug nuts (1/2'-20)/ Cotter Pin

Upgraded design - this replacement Ford Focus spindle nut redesigns the original to address a common failure

Reliable solution - maintains locking mechanism of nut but eliminates original failure-prone design

Application specific - spindle nut only meant to replace original on Ford Focus vehicles from 2000 to 2013

Replacement Spindle Tang Washer for EZ Lube Spindle Axle 2K to 7K Trailer

Our aftermarket Trailer Bearing & Seal Kit fits 1 Inch (1.000) Spindles on Axles rated for up to 2,000 lbs.

4 Bearing Cup & Cone Sets (1 Inner & 1 Outer)

2 Spring Loaded Grease Seal TB Style with a rust preventative coating