Best As Splined Drives in 2026

DO THEY FIT? Verify fitment with your vehicle by using the compatibility tool on this page before making your purchase.

FOR AFTERMARKET WHEELS ONLY: These lug nuts intended for installation on aftermarket wheels requiring a small diameter lug nut. These parts not intended to replace factory lug nuts on factory wheels.

SPECS: M12x1.50 thread - Closed End Spline Tuner Style Lug Nut - Conical 60 Degree Seat - 34.29mm long - 20.32mm wide

Fitment: Vehicles with wheel lug nuts requiring a 12x1.5 thread(5 lugs) and take a conical 60 degree seat with a 19mm hex, fit most of the Aftermarket Wheels, please check the seat type of your original lug nuts firstly before placing your Order, if you need the 4pcs set, you can refer B0BYJ91FWQ.

Specification: thread pitch: M12x1.5, 1.38"(35mm) overall length, 20mm OD(width), 60 degree cone/conical/tapered seat, come with 1 socket key with 3/4"(19mm) and 13/16"(21mm) hex, 20 packs((handwrench recommended, don't use the impact tool)

Performance: One-piece structure design, which is more safer while you are installing the lug nuts and 6 spline locking safety structure, can not torque down if no professional tool which is not easily stolen. all of our products past 72 hours salt spray tested which can promise a longer service life compared to 48 hours for others.

Fitment: Only work with 6 Point/spline Lug Nuts, Typically 12x1.25, 12x1.5, 1/2-20'' thread pitch, Not work on hex or spike lugnuts.

Specification: ID:17.8mm(0.7"), OD:20mm(0.8"), Overtall:90mm(3.5”), Depth:45mm; Works with multiple hex Socket:19mm(3/4'')&21mm(13/16''), hand wrench recommended(only for 6spline lug nuts)

Performance: The socket with durable teeth and shape is more safer while you are installing the lug nuts and all of our products past 72 hours salt spray tested which can promise a longer service life compared to 48 hours for others.

1pc 6 Spline Lug Nut Socket Key Replacement. ONLY compatible with 6-point Spline Type Tuner Locking Lug Nuts with smaller diameter (M12, M12x1.5, 12x1.25, 1/2", 1/2"x20 Thread Pitch). NOT compatible with larger spline lug nuts such as ones for Truck/SUV. Also NOT compatible with spike lugnuts.

Inner Diameter: 17.6mm (0.69"). Outer Diameter: 20.5mm (0.81"). Total Length: 90mm (3.5"). Depth: 62mm (2.4"). This key works with the following socket sizes: 19mm, 3/4", 21mm, 13/16".

[Quality] Special coating provides exceptional appearance and corrosion resistance. Manufactured from cold forged steel that can withstand much more force than the torque needed to secure the nuts on your vehicle.

【Size】ID-0.78"(20mm), OD-0.9"(23mm), Overtall-3.5"(90mm), Depth-1.78"(45mm), Hex 21mm (13/16) and 22mm (7/8)

【Fitment】Only fits 7 Point/Spline Tuner Lug Nut Key Compatible with M14x1.5, M14x2, 9/16-18 Threads Pitch 7 Spline Lug Nuts

【Premium 】Meets or Exceeds OEM Factory Standards. Durable Steel Plus, Not Easy to Break, Anti-Rust [Electrophoresis Painting], Anti-Cracked [Heat Treateds]

CUSTOMIZE YOUR VEHICLE: You want your car to stand out. So why settle for ordinary lug nuts? Create a custom look that people will remember with Orion Motor Tech’s unique designs.

COMPATIBILITY: For vehicles with wheel studs 14mmx1.5 thread and conical/cone seat (tapered). For wheels with 6 studs such as Cadillac Escalade; Chevrolet Avalanche, Blazer, Colorado, Silverado, Suburban, Tahoe; GMC Jimmy, Safari, Savanna, Sierra, Yukon; Ford Expedition, F-150; and Lincoln Navigator.

SPECIFICATIONS: Conical 14x1.5 thread pitch, closed end and 60 degree conical angle seat. 21mm Hex Size (21mm hex key), 2.0” x 0.91” (51mm x 22mm) extended lug nuts. Includes 24pc lug nuts and 1 sockets for 6-stud wheels. OEM equivalent quality.

ITEM SPECIFICATIONS: This 5-piece Non-Marring Impact Lug Nut Socket Set includes a reusable lightweight aluminum storage rail and five non-marring 1/2-inch drive lug nut sockets in the following sizes: 17mm, 19mm (3/4-inch), 21mm, 13/16-inch, and 7/8-inch.

DESIGN CONSIDERATIONS: Made of high strength Chrome Molybdenum steel with a corrosion-resistant Manganese Phosphate coating, these 6-point, thin-walled, impact-ready sockets feature a non-marring protective sleeve and insert to prevent scratches to your bolt tops, wheel rims, and lug nuts during use. Thanks to a total length of 3 3/8 inches (8.6cm) and a hollow design, these sockets are great for removing longer bolts, as well.

COMMON APPLICATIONS: These impact sockets can be used with any 1/2-inch drive hand wrenches, electric, or pneumatic tools, and are great for both factory and aftermarket painted, clear coated, chrome, and any other wheels with a finish you want to protect.

FITMENT: Compatible with Dodge Ford Jeep Wrangler Cherokee Commander Comanche Liberty TJ JK XJ ZJ ,Golf Cart Ezgo Club Car,Fit for aftermarket wheels with 1/2-20 Thread Pitch and 60 degree conical/coine seat | For part no,EZGO: 14723-G1 1701160 6350, Club Car 1010984 1011390, Cushman 800573, Jacobsen 14723-G1 1701160 6350

SPECIFICATION: 1/2-20 Thread Size,1.38 inch (35mm) Long,60 degree conical seat,0.8 inch (20mm) width,3/4” (19mm) and 13/16” (21mm) Hex socket,20 pcs black close end lug nuts includes 1 socket key tool.

ADVANTAGE: Made of high strength steel,painted black electrophoretic coating,greatly reduces the chance of rusting.Adds a visual impact to your car while keeping the installation secure.The tapping is clean and neat, the thread is clear, and the installation is easy and time-saving. Bring you efficient installation and safe driving experience.

Finish: Black

Works with Gorilla 1921SD-KEY lug nuts

Works with most small diameter 6 spline lug nuts

【Premium CR-MO】Made from premium Heat-treated chrome molybdenum steel with black phosphate finish.

【Set include】5-spline 5/8-inch, 6-spline 41/64-inch and 45/64-inch, 7-spline 3/4-inch, 5/8-inch and 11/16-inch, 12-spline 11/16-inch and 13/16-inch. Star Lug-10-point 1/2-inch, 8-point 5/8-inch and 7/16-inch, 9-point 1/2-inch. High Tech Hex Lug -15mm, 9/16, 12mm, Fluted 12mm.

【Application】Lock Lug Nut Removal Tool Kit is a master set of double hex-headed, hex, that can be used on spline, star, hex, and fluted hex fasteners. And tuner style keys to fit a variety of vehicles with aftermarket lug nuts.

21 millimeter length and 20 millimeter outer diameter with open ended spline drive design

Open ended Muteki lug nuts weigh a mere 25 grams each

21mm length 20mm outer diameter with open ended spline drive design

2pc 7 Spline Lug Nut Socket Key Replacement. Compatible with 7-sided Spline Type Tuner Locking Lug Nuts. Typically 14x1.5, 14x2, 9/16x18, 1/2"x20 Threads. Works with Multiple Hex Socket Sizes: 19mm, 3/4", 21mm, 13/16".

[Quality] Special coating provides exceptional appearance and corrosion resistance. Manufactured from cold forged steel that can withstand much more force than the torque needed to secure the nuts on your vehicle.

[Verify Nut Diameter] There are different diameter spline lug nuts on the market. Ensure that the diameter of your 7-Spline lug nut is smaller than 20mm.

【First】There are different diameter spline lug nuts on the market. And if you have any questions, visit our store and click "Ask a Question"

【Fitment】6 Point Spline Tuner Lug Nut Socket Key Tool Compatible with M12x1.5, M12x1.25, 1/2-20, M10x1.25, 3/8-20Threads Pitch Spline Lug Nuts

【Material】Not Easy to Break, Meets or Exceeds OEM Factory Standards. Durable Steel Plus Black Coating:Anti-Rust [Electrophoresis Painting] ,Anti-Cracked [Heat-Treateds]

★FITMENT★- Only fit for wheels with studs 1/2 x 20 and Conical Seat 60 Degree Lug Nuts. If you are not sure whether these chrome lug nuts are compatible with your car, please contact us and we will help you

FEATURES- Solid One piece design. Acorn tuner lug nuts are made of high-quality steel through cold heading. Four-layer electroplating and nearly 96 hours of salt spray test, and apply anti-rust oil. Not easy to rust and fade

SPECS - Thread Size: 1/2-20, 1/2x20 , Chrome nuts Size: 2 inch/50mm tall,19mm Hex (3/4 inch Hex), Spline Drive Lug Nuts Seat Type: Conical Seat 60 Degree

This key is used to tighten or remove spline drive tuner short style lug nuts

Length is 3.5 Inches

Metal Finish

20-piece package of Closed 6-Spline aftermarket lug nuts. These steel alloy lug nuts are cold-forged and heat-treated to ensure strength, performance, and durability. Machine-precision 1/2"x20 threads ensure a snug fit onto vehicle's studs. Coating undergoes salt spray testing to ensure extra protection from rust/corrosion.

Compatible with Ford 1992-2011 Crown Victoria, 1977-1988 Thunderbird, 1964-2014 Mustang. Compatible with Ford 1992-1996 Bronco, 1984-1990 Bronco II. Compatible with Ford 1992-2006 E-150 Econoline, 1991-2019 Explorer, 2001-2010 Explorer Sport Trac. Compatible with Ford F-150 (1992-1996), 1960-1979 Ranchero, 1983-2012 Ranger. Compatible with Dodge 1965-1977 Monaco, 1987-1990 Dakota, 2007-2012 Nitro, 1994-2001 Ram 1500. NOTE: Vehicle Must Have 1/2"-20 1/2x20 1/2"x20 Studs.

Total Length: 1.40 inches | Thread Size & Pitch: 1/2-20 | Seat Type: Cone Seat | Color: Silver / Chrome | HEX SIZE: Spline | STYLE: Long Spline, Closed End Lug Nuts. See Diagram for Measurements.

Finish: Black

Works with most 7 spline 14x1.5, 14x2.0, and 9/16" lug nuts

Works with most AccuWheel, DPAccessories, Gorilla, etc lug nuts

Design for remove/install auto cars wheel tire nut screws/tire anti-theft screws

Set Contents: #0(10 Point), #1(11 Point), #2(13 Point), #3(14 Point), #4(15 Point), #5(16 Point), #6(17 Point), #7(19 Point), #8(20 Point), #9(21 Point) (Spline/Point)

Lug Nut Key Compatible with most of VW (Golf, Jetta, Polo…) and Audi (A4, A5, A6) wheel tire nut screw

FITMENT - 2pcs 6 Point Spline Lug Nut Socket Key Tool Compatible with M12x1.5, M12x1.25, 1/2-20 threads spline lug nuts. Or Contact our Customer Service Team to verify a safe and proper fitment. Please note: This 6-spline socket key is only compatible with 17mm. It is recommended that you check the user manual to understand the required spacification of the nuts socket.

SPECIFICATION - 17.6mm Inner Diameter and 20.5mm Outer Diameter - Compatible with 17mm Replacement Hex Socket.

MATERIAL - Electrophoretic paint provides exceptional appearance and corrosion resistance, cold forged and heat treated steel(anti-rusting and anti-stripped, high strength and durability).

Wheel Nut Removal Socket Set Including 20 PC 17mm socket: #41, #42, #43, #44, #45, #46, #47, #48, #49, #50, #51, #52, #53, #54, #55, #56, #57, #58, #59, #60.

They are used to remove or lock wheel anti-theft screws for BMW: 1 Series F20/F21, 3 Series F30/F31, 4 Series F32/F34/F36, 5 Series F10/F11, 6 Series F12/F13 and 7 Series F01/F02/F04.

Designed to fit OE style BMW wheel nuts. When removing your lug nuts, it is best to evenly loosen each nut on the wheel as opposed to completely removing one at a time. This helps reduce pressure on the remaining nuts.

【Easy to Removal】Our spline wheel lock removal kit will allow you to easily remove broken, peeled, rusted, rounded-off, or frozen lug nuts, suitable for all types of fasteners. All lug nut socket set are placed in a solid storage box, easy to carry and store.

【Upgrade Your Toolkit】Upgrade your automotive maintenance toolkit with our lug nut extractor and perform vehicle wheel maintenance like a pro, not only for car repair, but also for a boat, suv, van, or truck. Enjoy hassle-free wheel lock key replacement at home.

【Solid and Durable】Constructed from heat-treated chrome-molybdenum steel(CR-MO) with a black oxide finish for strength and longevity; Simply attach your combination wrench (not included) to the corresponding key size in this wheel lock remover kit.

Spline Lug Nut Socket include: 1 x 6 spline lug nut key and 1 x 7 spline lug nut key. 6 spline lug nut key Suitable for M12x1.25, M12x1.5, 1/2"-20 thread pitch wheel lug nuts., 7 spline lug nut key Suitable for M14x1.5, M14x1.75, M14x2, 9/16"-18 thread pitch wheel lug nuts. specifically designed to easily remove locking lug nut sets.

Strong Durable - Spline lug nut socket made of chrome-molybdenum steel (CR-MO), finished with black oxide to hold up to a lifetime of use. It is not easy to break during use.

Verify Spline Count Before Purchasing - these keys only work on lug nuts with 6 spline or 7 spline and will, NOT compatible with larger spline lug nuts such as ones for Truck/SUV. Also NOT work on 5-spline or spike lug nuts or nuts with hex heads.

Spline Drive Lug Nut key for removal and installation of spline drive lug nuts.

16-PIECE SET: This Orion Motor Tech wheel lock removal kit includes 16 multi-point keys in the most needed SAE and metric sizes—5/8", 41/64", 45/64", 7/16", 11/16", 13/16", 3/4", 9/16", 1/2", 12 mm, and 15 mm; the double-hex heads make this set compatible with 13/16 and 7/8 inch (20 and 22 mm) sockets and lug wrenches

SCRATCH-FREE OPERATION: Our lug nut removal tool set comes with a multi-point thin-walled design to deliver powerful torque to 16 different lug nut fitting sizes without damaging your rims; the extra-long keys also help avoid any dents, dings, or scratches during use

WIDE APPLICATION: The wide range of sleeve sizes in this locking lug nut removal tool kit, enables you to easily remove spline, star, hex, and fluted hex locking lugs nuts with maximum protection and minimal effort from most vehicles, letting you work quickly and efficiently

Includes a splined security key

Spline drive lug nuts maximize thread engagement

Increase wheel security and improve appearance

Bulge Acorn Open End Chrome Small Diameter Lug Nut

9/16" UNF Thread, 1.00"(25.4mm) Length

Spline with spline adapter included

16-piece Set: 16 different keys to fit a wide variety of stock and after-market wheel lock nuts. 8 Spline Sizes (12 spline 13/16, 12 spline 11/16, 7 spline 3/4, 7 spline 5/8, 7 spline 11/16, 6 spline 41/64, 6 spline 45/64, 5 spline 5/8) | 4 Star Lug (10-point 1/2, 8 point 5/8, 8 point 7/16, 9 point 1/2) | 4 High Tech Hex Lug (15mm, 9/16, 12mm, Fluted 12mm)

High Quality & Durability: Heavy duty construction with heat treated Chrome Molybdenum Steel (CR-MO) and a black oxide finish to ensure longevity, durability, and prevent nicks and scratches while removing your wheels and tires.

Versatile Kit : Comes with standard (SAE) and metric (MM) pieces that can be used on spline, star, hex, and fluted hex fasteners. Thin and long Lug Nut Keys allow perfect fitment while protecting your tuner wheels.

【Package Include】: 12 spline 13/16", 12 spline 11/16", 7 spline 3/4", 7 spline 5/8", 7 spline 11/16", 6 spline 41/64", 6 spline 45/64", 5 spline 5/8". 4pcs star lug (10 point 1/2", 8 point 5/8", 8 point 7/16", 9 point 1/2") & 4 pcs high tech hex lug (15mm, 9/16", 12mm, fluted 12mm).

【Material】The lug nut key set are made of chrome molybdenum steel with black phosphate finish, strong and durable; not easy to rust or corrode.

【Fitment】The wheel lock removal kit is used to remove spline, star, hex and grooved hex latch nuts, matching wrench use, suitable for vehicles with nuts.

【All-in-one Socket Tool Set】 The 22PCS Wheel Lock Nut Key Kit is compatible with a wide range of BMWs and is used to remove and install wheel anti-theft nuts. Save a lot of money if you buy it. But it is not suitable for all BMW models, please check carefully whether the thread on the product picture is consistent with the thread on your car tire before purchasing. If necessary, you are welcome to purchase our other set of lock nut socket set tools for BMW.

【20 Different Sockets】 This socket set includes 20 different sockets to be compatible with more BMW models. The models of the sleeves are: 041, 042, 043, 044, 045, 046, 047, 048, 049, 050, 051, 052, 053, 054, 055, 056, 057, 058, 059, 060.

【1 x Adaptor & 1 x Punch】 This wheel anti-theft socket removal kit includes a 1/2" drive socket adapter for use with sockets. In addition to this, a punch is provided for changing out a different socket for the adapter.

【Note】This spline Socket key works with 6-side Spline Type Tuner Locking Lug Nuts with 12x1.5, 12x1.25, 1/2" threads.

【Compatibility】Multiple Hex Socket Sizes: 19mm, 3/4", 21mm, 13/16" Hex Sockets.

【DO NOT FIT】DO NOT FIT Lugs with 14x1.5, 14x2 or 9/16-18 thread sizes.