Best Inkbird Temperature Controllers in 2026

🌟🌟【Two Modes】Have two relays. Switch between cooling and heating modes. Support °F/°C display.

🌟🌟【Setting Value】Control the temperature by setting the temperature set value and the difference value.

🌟🌟【Different Functions】Refrigerating control output delay protection, and temperature calibrating.

🥇🥇【Easy to use】 Supports °C/°F display.

🥇🥇【Dual relay】able to power refrigeration and heating equipment as conditions change.

🥇🥇【Dual Display Window】Displays measured temperature and set temperature at the same time.

Supports Centigrade or Fahrenheit unit display.

The sensor can easily be replaced.

Maximum output load: 1100W (120V).

Simple to use: plug it in, set the temp ranges, place the probe, plug in the heater/cooler into the marked outlet.

Be able to connect with refrigeration and heating equipment at the same time.

Easily calibrated.

👍👍【Android & IOS WIFI App】WIFI APP - WIFI smart controller supports both IOS & Android. WIFI connection supports 2.4GHz Wi-Fi band with free “INKBIRD” APP to control the temperature remotely.

👍👍【Dual Relay Output】Dual relay - able to power refrigeration and heating equipment as conditions change.

👍👍【High/Low Temperature Alarm】 Set High/Low temperature alarm when the temperature is over or under preset temperature or the sensor experiences a malfunction.

It does indeed read in deg F.

Can control both heating and cooling output

Has an alarm to indicate sensor failure or high temperature

Support reading with Centigrade or Fahrenheit unit.It is more suitable for setups with water cycle. If the device does not have water cycle, the ITC-100 series is recommended.

Dual display window, be able to display measured temperature and set temperature at the same time

Simplify operational processes and you don't need to operate more steps if you want to set the definite value

【Alarm Output】With one alarm relay output: AC250V 3A (Resistive load) ON/NC, you may connect it with a buzzer.

【Supports 3 Wires Sensors】3 wires sensor or 2 wires sensor, like K type thermocouple and Cu500, are supported by this PID temperature controller

【SSR Output】With one relay output for external SSR, SSR or relay is a must for this temperature controller. A 40DA SSR is included

【Output】2 Relays, control the temperature by setting the temperature set value and the difference value.

【Mode】Automatic switch between cooling and heating modes, Fahrenheit and Celsius display can be choose.

【Calibration】Temperature calibrating, refrigerating control output delay protection.

Equipped with dual LED display, it is more suitable for the device with water circulation. If the unit does not have water circulation, please purchase itc-100 series

Offers display options of Centigrade and Fahrenheit

Enabling more humanized temperature control

🎉🎉Support reading with Centigrade or Fahrenheit unit.It is more suitable for setups with water cycle. If the device does not have water cycle, the ITC-100 series is recommended.

🎉🎉Dual display window, be able to display measured temperature and set temperature at the same time

🎉🎉Simplify operational processes and you don't need to operate more steps if you want to set the definite value

🙌🙌【Plug-n-Play Easy Operation】The electric home brewing controller is an all-in-one machine and no more installation is needed. Just plug in and set up the system according to your needs.

🙌🙌【Precise Control】PID digital controller provides accurate temperature control at the range of -50~125℃/ -58~257℉, and the accuracy of the temperature is ±0.1℃ or ±0.2℉.

🙌🙌【Independent Pump Function】The Pump Function is special designed for home brewing customers and it can be operated separately, just access your pump and press the “Pump” button when you need it.

🌠🌠【Setting Independently】Inkbird C206T lets you to control your desired environment temperature. You can set the day and night temperature independently to connect your heat equipment, then set the temperature that you want to maintain.

🌠🌠【Accuracy Temperature】The heat thermostat is with 6.56ft precise temperature sensor and its adjustable set points temperature control from -58 to 212°F with an accuracy of ±1°F.

🌠🌠【Three Display Window】Be able to display 3 different details such as the current temperature, the setting temperature and the current time.

Dual display window, be able to display measured temperature and set temperature at the same time.It is more suitable for setups with water cycle. If the device does not have water cycle, the ITC-100 series is recommended.

Support reading with Centigrade or Fahrenheit unit

Simplify operational processes and you don't need to operate more steps if you want to set the definite value

PID and ON/OFF Control Mode with high standard self-adjust function

Multiple temperature sensors (K, S, Wre, T, E, J, B, N, CU50, PT100)

Accuracy of displaying and controlling 0.1ºC,

Plug and play design, easy to use

Compatible with multiple temperature sensors (K, S, Wre, T, E, J, B, N, CU50, PT100)

Support reading with Centigrade or Fahrenheit unit

PID and ON/OFF Control Mode with high standard self-adjust function

Multiple temperature sensors (K, S, Wre, T, E, J, B, N, CU50, PT100)

Self-adjusting function and intelligent control of the instrument to ensure the long-term stability.It is more suitable for setups without water cycle, such as ovens.

Multiple temperature sensors (K, S, Wre, T, E, J, B, N, CU50, PT100)

PID and ON/OFF Control Mode with high standard self-adjust function

relay inside.It is more suitable for setups without water cycle, such as ovens.

Fahrenheit and Celsius Display Can Be Choose

Alarm When Temperature Exceeds the Limit or When Sensor Error

2 Relays, Switch Between Cooling and Heating Modes

☕ High-Precision Temperature Control: Works with DC/AC with a voltage range of 85V-265V; The XMT7100 PID Controller uses an advanced artificial intelligence-enhanced PID algorithm to provide precise temperature control for a wide range of applications, from brewing espresso to controlling the temperature of reptile enclosures

☕ Versatile Applications: This temperature controller can be used for a variety of applications, including controlling the temperature of aquariums, reptile enclosures, kilns, and more. Its compact size makes it easy to integrate into your existing setup, while its powerful features allow you to customize your settings for optimal performance

☕ Easy to Use: With an easy-to-read LCD display and simple controls, the XMT7100 PID Controller is easy to use, even for beginners. The auto-tune function automatically adjusts the control parameters for optimal performance, while the F/C mode allows you to easily switch between Fahrenheit and Celsius readings