Best Motorad Thermostats in 2026

Receiver can be installed in wall, on the hearth or under the fireplace behind the control access panel

Includes transmitter, receiver, wall plate, installation instructions, batteries

For gas fireplaces only.

Receiver can be placed on the hearth or under the fireplace behind the control access panel

Includes transmitter, receiver, wall clip, installation instructions, batteries

Programmable thermostat setting, All Skytech batteries and wall holder included

9-hour countdown timer and 24-hour clock, Flame icon and low battery indicator

Smart Stat II/III. Please note that Smart Stat II and III are the same units and there is no difference between the two.

This Skytech Smart Stat II/III fireplace remote control system was developed to provide a safe, reliable, and user-friendly remote control system for gas heating appliances. The system can be operated thermostatically or manually from the transmitter. The system operates on radio frequencies (RF) within a 20' range using non-directional signals. The system operates one of 1,048,567 security codes that are programmed into the transmitter at the factory; the remote receiver's code must be matched to that of the transmitter prior to initial use.

Receiver can be installed on the hearth or under the fireplace behind the control access panel

Includes transmitter, receiver, cover, wall clip, installation instructions, batteries

Receiver box is designed for millivolt gas valves only and acts as a dry contact switch (the receiver will not output any voltage)

Includes transmitter, receiver, wall clip, wall plate, installation instructions, batteries

Includes quick mount pilot assembly, damper clamp, valve, solenoid, flex line, and remote

For use with Natural Gas (LP conversion kits available); Valve kit measures 3 3/4" W x 4" D 2 3/4" H

Includes quick mount pilot assembly, damper clamp, valve, solenoid, flex line, and remote

For use with Natural Gas (LP conversion kits available); Valve kit measures 3 3/4" W x 4" D 2 3/4" H

Limited lifetime warranty

Includes thermostat, wires, installation instructions, (2) 3V button cell batteries

Timer Control - Timer feature allows the user to set a desired amount of time the fireplace will operate; countdown timer can be set up to a maximum time of 9 hours

Thermostat Control - Thermostat feature operates the fireplace whenever the room temperature swings (2 °F) above or below the set temperature

Plug-In Design - UL Listed 110v receiver with learn function and 18 inch wires with connectors can learn up to (2) additional Skytech remotes; also allows manual control of fireplace with On/Remote/Off settings

Includes - Transmitter remote, receiver box, wall clip, wires with connectors, batteries, and instruction manual

Ultimate convenience of a cozy fireplace with the push of a button

Includes transmitter, receiver, cover, wall clip, installation instructions, batteries

Operational range of up to 20-feet

Ultimate convenience of a cozy fireplace with the push of a button

▼ Includings: Battery-Free button switch; Remote receiver box; Power adapter & cord. and signal wires (length 3' each); Installation Instructions. ▼ Operates at a range of 20-foot & non-directional RF signal. ▼ FCC certified. UL approved parts used.

▼ Benefits: (1) Self power generation. No more battery replacement every heating season. Eco-friendly; (2) Stick the button switch anywhere with 3M PE foam adhesive backing; (3) Quick "LEARN" pairing & simple ON/OFF for ease of use; (4) No wiring from fireplace to switch, easy installation.

▼ Competitor Cross Reference Model #: 1001-A, 1001D-A, SKY-1410-A, 1420, SKY-4001. ▼ Replacement for Fireplace or Part Brands: American Flame, Avalon, Continental, Dexen, Fenwal, Frymaster, HHT, Heatilator, Honeywell, HPC, Heat-N-Glo, Monessen, Montigo, Napolean, Lennox, Lopi, Pitco, RH Peterson / Real Fyre, Robertshaw, SIT, Superior (IHP), Synetek, Skytech, Tri-Star, Town & Country, White Rodgers, Xtrordinair...etc. ▼ LEGAL DISCLAIMER: The Brand name & Model # (if listed) are for cross reference only. All Brands, Trademarks & Model Numbers remain the property of their respective owners.

Wall Kit Included:Receiver features an optional wall plate to mount the receiver box in a wall, has 30 foot range, and also allows manual control of fireplace with On/Remote/Off settings.The 16 safety codes eliminate the impact of other household appliances. It has child protection function.

Complete Kit：Includes - Transmitter remote, receiver box, wall plate, wall clip, screws, 18" wires with connectors,and instruction manual.6 hr. optional safety shutdown (receiver)

EASY TO INSTALL AND USE: To use the fireplace basic remote on/off control system kit, simply connect the two terminals to the TH and TH/TP terminals of the millivolt valve, install the batteries and you're ready to go. You can also check our instruction manual or find related installation videos on YouTube.

IMPORTANT SAFETY INFORMATION:This remote-control system requires two (2) “AAA” and four (4) “AA” alkaline batteries to power the transmitter and receiver.Due to the limitation of air transportation, we can't add batteries.This remote-control system is designed for use with a millivolt or 24V gas valve system. Do not use this remote-control system on applications with voltages above 24 Volts AC/DC and 1 amp current.The remote receiver should be kept away from temperatures exceeding 130º F.