Best Taper Threading Taps in 2026

Thread Size: M3 x 0.5mm. High-speed steel metric taps are with high hardness and toughness for wear resistance, well suited for general purpose applications.

The thread tap can make new threads or re-thread damaged or jammed threads. Uncoated taps feature just the base substrate without any additional coatings, and fit a wide range of applications.

Suitable for processing through holes or shallow holes on most metals, iron plate, copper, zinc, alloy steel, abrasive steel, A3 steel, stainless steel, etc.. Add appropriate tapping oil for higher quality internal threads and more durable taps.

Spiral Point Tap: Thread size: M3 x 0.5; thread tolerance: H2; thread length: 15mm / 0.6"; plug chamfer and right hand thread cutting. 3 straight flutes are ground to provide provide downward chip removal, with clear threads and sharp cutting edges.

Material & Finish: 6542 high speed steel metric taps run at high speeds and generate threads quickly and efficiently, offering high hardness (HRC62-64), wear resistance, and good toughness. Titanium coating for improving wear resistance, hardness, heat resistance, lubricity.

Applications: Thread taps are great for through-hole threads. Can be used for drilling and tapping stainless steel, aluminum, alloy steel, ordinary steel, cast iron, non-ferrous metals, hard plastics, etc. Flutes on the screw tap help to remove chips and debris from the hole.

Thread Tap: Thread Size: #10-24 UNC; Class: 2B; Thread Length: 21mm / 0.83 inch; Shank Side Width: 3.7mm / 0.15 inch; Total Length: 63mm / 2.5 inch

High Speed Steel Tap: The screw tap has high wear resistance, fast cutting speed, high strength and hardness, and long service life. With uncoated base substrate only, suitable for general purpose tapping.

Wide Applications: The thread tap is suitable for drilling mild steels, aluminum, iron, copper, stainless steel, hard plastic, processing through holes or shallow holes. Add appropriate tapping oil for higher quality internal threads and more durable taps.

Metric Taps: Thread Size: M22; Pitch: 1.5; Shank Side Width: 15mm / 0.59 inch; Thread Length: 32mm / 1.26 inch; Total Length: 90mm / 3.54 inch

Tap Set: Taper Style: Starts the thread square with the workpiece. Bottoming Tap: Generate threads to the bottom of holes. Add appropriate tapping oil for higher quality threads and more durable screw taps.

Wide Applications: The thread tap kit is used to re-thread damaged or jammed threads. Suitable for tapping through or shallow holes in mild steels, aluminum, iron, copper, hard plastic.

Thread Size:s M14 x 1mm. High-speed steel metric taps are with high hardness and toughness for wear resistance, well suited for general purpose applications.

The thread tap can make new threads or re-thread damaged or jammed threads. Uncoated taps feature just the base substrate without any additional coatings, and fit a wide range of applications.

Suitable for processing through holes or shallow holes on most metals, iron plate, copper, zinc, alloy steel, abrasive steel, A3 steel, stainless steel, etc.. Add appropriate tapping oil for higher quality internal threads and more durable taps.

Specifications: Thread size: UNC 1/4-20; thread tolerance: H2; thread length: 23mm / 0.9"; plug chamfer and right hand thread cutting. 3 straight flutes are ground to provide downward chip removal

Material & Finish: High-speed steel tool is great for general purpose applications, offering high hardness and toughness. Titanium coating for improving wear and fusion resistance, long service life

Applications: Great for through-hole threads. Can be used for drilling and tapping stainless steel (below 30HRC), aluminum, die steel, ordinary steel, non-ferrous metals, hard plastics, etc.

Metric Taps: Thread Size: M24; Pitch: 3; Shank Side Width: 16.5mm / 0.65 inch; Thread Length: 43mm / 1.69 inch; Total Length: 100mm / 3.94 inch

Tap Set: Taper Style: Starts the thread square with the workpiece. Bottoming Tap: Generate threads to the bottom of holes. Add appropriate tapping oil for higher quality threads and more durable screw taps.

Wide Applications: The thread tap kit is used to re-thread damaged or jammed threads. Suitable for tapping through or shallow holes in mild steels, aluminum, iron, copper, hard plastic.

Metric Taps: Thread Size: M12; Pitch: 1; Shank Side Width: 7.5mm / 0.3 inch; Thread Length: 25mm / 0.98 inch; Total Length: 63mm / 2.48 inch

Tap Set: Taper Style: Starts the thread square with the workpiece. Bottoming Tap: Generate threads to the bottom of holes. Add appropriate tapping oil for higher quality threads and more durable screw taps.

Wide Applications: The thread tap kit is used to re-thread damaged or jammed threads. Suitable for tapping through or shallow holes in mild steels, aluminum, iron, copper, hard plastic.

Thread Tap: Thread Size: #8-32 UNC; Class: 2B; Thread Length: 20mm / 0.8 inch; Shank Side Width: 3mm / 0.12 inch; Total Length: 54mm / 2.13 inch

High Speed Steel Tap: The screw tap has high wear resistance, fast cutting speed, high strength and hardness, and long service life. With uncoated base substrate only, suitable for general purpose tapping.

Wide Applications: The thread tap is suitable for drilling mild steels, aluminum, iron, copper, stainless steel, hard plastic, processing through holes or shallow holes. Add appropriate tapping oil for higher quality internal threads and more durable taps.

Metric Taps: M3 x 0.5 metric taps set. Taper style: starts the thread square with the workpiece. Plug style: generally used in through holes.

Applications: The hand threading tap kit is used to re-thread damaged or jammed threads. Suitable for threading mild steels, aluminum, iron, copper, hard plastic.

Easy to Use: Hand tapping, mainly used with tap wrenches. Standard thread milling taps are used to thread through holes or shallow and blind holes.

Tap Size: M6 x 1.0 thread, H2 tolerance. Spiral flute design, upward chip removal. Right hand thread cutting, clear threads without burrs, fast tapping with accuracy.

Material and Finish: High-speed steel tool is with high hardness and toughness for wear resistance, good for general purpose applications. Features nitriding coated surface for rust prevention and long service life.

Applications: Suitable for processing blind holes and sticky materials. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc.

Specifications: M6 x 1.0 thread with H2 tolerance, JIS standard, right hand thread cutting. Straight flutes taps provide downward chip removal

Material and Finish: High-speed steel tool is great for general purpose applications, offering high hardness and toughness. TICN coating for improving wear and fusion resistance, long service life

Applications: Great for through-hole threads. Can be used for drilling and tapping stainless steel (below 30HRC), aluminum, die steel, ordinary steel, non-ferrous metals, hard plastics, etc.

Metric Taps: M2.5 x 0.45 metric taps set. Taper style: starts the thread square with the workpiece. Plug style: generally used in through holes.

Applications: The hand threading tap kit is used to re-thread damaged or jammed threads. Suitable for threading mild steels, aluminum, iron, copper, hard plastic.

Easy to Use: Hand tapping, mainly used with tap wrenches. Standard thread milling taps are used to thread through holes or shallow and blind holes.

Tap Size: M8 x 1.25 thread, H2 tolerance. Spiral flute design, upward chip removal. Right hand thread cutting, clear threads without burrs, fast tapping with accuracy.

Material and Finish: High-speed steel tool is with high hardness and toughness for wear resistance, good for general purpose applications. Features nitriding coated surface for rust prevention and long service life.

Applications: Suitable for processing blind holes and sticky materials. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc.

Tap Size: M8 x 1.25 thread, H2 tolerance. Spiral flute design, upward chip removal. Right hand thread cutting, clear threads without burrs, fast tapping with accuracy.

Material and Finish: High-speed steel tool is with high hardness and toughness for wear resistance, good for general purpose applications. Features nitriding coated surface for rust prevention and long service life.

Applications: Suitable for processing blind holes and sticky materials. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc.

Tap Size: M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1, M8 x 1.25. Straight flute design, clear threads with no burrs. Provide downward chip removal, and fast tapping with accuracy.

Applications: Can make new threads or re-thread damaged or jammed threads. Tap most materials in through or blind holed conditions.

Material: High-speed steel hand taps are with high hardness and toughness for wear resistance, well suited for general purpose applications.

Tap and Drill Bit: Tap thread size: M5 x 0.8, drill bit diameter: 4.2mm / 0.17". Cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance.

Spiral Flute Tap: Spiral flute design, upward chip removal, right hand thread cutting, fast tapping with accuracy. Suitable for processing blind holes and sticky materials, and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc.

Twist Drill Bit: Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches. Chips are not easy to stick to the tool.

Spiral Flute Taps: Thread Size: 3/8-24 UNF; Tolerance Grade: 2B; Square End Size: 6.2mm / 0.24". Spiral flute design, upward chip removal. Right hand thread cutting, clear threads, fast tapping with accuracy.

High-speed steel tool: High speed steel tool has high hardness and toughness, heat resistance and wear resistance. Features the base substrate without any coatings. Fit for most general purpose thread tapping.

Wide Applications: Suitable for processing blind holes and sticky materials. For drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics. Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break.

Metric Taps: M16 x 2 metric taps set. Taper style: starts the thread square with the workpiece. Plug style: generally used in through holes.

Applications: The hand threading tap kit is used to re-thread damaged or jammed threads. Suitable for threading mild steels, aluminum, iron, copper, hard plastic.

Easy to Use: Hand tapping, mainly used with tap wrenches. Standard thread milling taps are used to thread through holes or shallow and blind holes.

Tap Size: 8-32 UNC thread, H2 thread tolerance grade. Spiral flute design, upward chip removal. Right hand thread cutting, clear threads, fast tapping with accuracy.

Material and Finish: High speed steel tool is with high hardness and toughness, heat resistance and wear resistance. Features the base substrate without any coatings. Suitable for general purpose thread tapping.

Applications: Suitable for processing blind holes and sticky materials. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc.

Tap Size: 6-32 UNC thread, H2 thread tolerance grade. Spiral flute design, upward chip removal. Right hand thread cutting, clear threads, fast tapping with accuracy.

Material and Finish: High speed steel tool is with high hardness and toughness, heat resistance and wear resistance. Features the base substrate without any coatings. Suitable for general purpose thread tapping.

Applications: Suitable for processing blind holes and sticky materials. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc.

Tap Size: 4-40 UNC thread, H2 thread tolerance grade. Spiral flute design, upward chip removal. Right hand thread cutting, clear threads, fast tapping with accuracy.

Material and Finish: High speed steel tool features high hardness and toughness, heat resistance, good for general purpose applications. Titanium Plating for wear resistance, corrosion resistance, rust protection.

Applications: Suitable for processing blind holes and sticky materials. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc.

Specifications: M2 x 0.4 thread with H2 tolerance, DIN371/376 standard, right hand thread cutting. Straight flutes taps provide downward chip removal

Material and Finish: High-speed steel tool is great for general purpose applications, offering high hardness and toughness. TICN coating for improving wear and fusion resistance, long service life

Applications: Great for through-hole threads. Can be used for drilling and tapping stainless steel (below 30HRC), aluminum, die steel, ordinary steel, non-ferrous metals, hard plastics, etc.

Straight Flute Taps: Thread size: M12 x 1.5; thread length: 30mm / 1.18"; square end size: 7mm / 0.28"; cutting direction: left hand (reverse). Straight flute design, downward chip removal, clear threads, fast tapping with accuracy.

Wide Applications: Suitable for processing through holes. Used for drilling and tapping stainless steel, aluminum, die steel, bronze, hard plastics, etc.. Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.

Titanium Coating: Titanium coating provides excellent corrosion resistance, greatly improves wear resistance and hardness, and reduces the coefficient of friction. M35 Cobalt high speed steel tool features high hardness (HRC65-66), high red hardness, high wear resistance, good toughness.

Tap Size: 3/8"-16 BSW thread, H2 tolerance. Spiral flute design, upward chip removal. Right hand thread cutting, clear threads without burrs, fast tapping with accuracy.

Material and Finish: M35 cobalt high-speed steel tool (5% Co) is with high hardness (up to around 67HRC) and toughness for wear resistance. Features just the base substrate without any additional coatings, great for wide ranges of applications.

Applications: Suitable for processing blind holes and sticky materials. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc.

Thread Size: M10 x 1.25mm. High-speed steel metric taps are with high hardness and toughness for wear resistance, well suited for general purpose applications.

The thread tap can make new threads or re-thread damaged or jammed threads. Uncoated taps feature just the base substrate without any additional coatings, and fit a wide range of applications.

Suitable for processing through holes or shallow holes on most metals, iron plate, copper, zinc, alloy steel, abrasive steel, A3 steel, stainless steel, etc.. Add appropriate tapping oil for higher quality internal threads and more durable taps.