Best Silver Thresholds in 2026

Adjustable COMPOSITE CAP

Mill- *Silver Color

Solid Composite base underneath the full length of the Threshold

Fits out swing doors up to 36-inch wide

Seals gaps up to 1/2-inch high between bottom of door and floor

Aluminum finish

This product adds a great value

Product is highly durable and very easy to use

This product is manufactured in China. Seals gap under door up to 3/4 in. to help stop cold drafts

Thresholds Transition Strip/Edging Trim Strips: Threshold transitions and edge trims for carpets and thin floors, laminates.

Self-adhesive: The product comes with double-sided tape, which can be pasted and installed by tearing off the protective film on the back of the tape.

Dimensions: Length 2m, Width 35mm, Height 7mm, suitable for sill transition and edge trimming between 4.5 - 5mm height.

HEAVY DUTY ALUMINUM ALLOY MATERIAL - NeatiEase floor transition threshold strip is made of high-quality aviation aluminum with a thickness of 2 mm. It is waterproof and moisture-proof, durable, environment-friendly, anti-oxidation, high hardness, easy to clean, etc

EASY INSTALLATION - Measure and cut the length you need, and use super glue to paste the base plate and the ground, without drilling, without damaging the floor. (please note: the package does not include super glue)

WIDE APPLICATION - Floor transition strips are widely available on thresholds, floor, vinyl planks, laminate, concrete floor, tile.

2 1/2" WIDE X 1/4" HIGH ALUMINUM THRESHOLD

COMES WITH PRE-PUNCHES HOLES AND SCREWS INCLUDED

HEAVY GAUGE ALUMINUM

1. 【Key sizes】 PP hair Net width: 3 inches. Net length: 39.3 inches

2. 【Quality】 Durable PP hair of door brush sweep is held firmly by strong metal piece. Each strip is produced after strict Quality Control Procedure( MIL-STD-105E).

3. 【Facility】 Aluminum door brush sweep will be easily fixed by SUS screws to the door panels or frames while the oval drilling holes make it easy to vertically adjust.

Oak and Aluminum Adjustable Threshold 3 5/8" wide

Adjustable Threshold Height from 1 1/8" to 1 1/2" High

Pre-Finished Red Oak and Heavy Gauge Aluminum

COMPOSITE CAP and COMPOSITE BASE

The COMPOSITE Cap is Adjustable

Solid COMPOSITE BASE underneath the full length of the Threshold

【 36” Long Aluminum Floor Transition Strip】: Made of high strength aluminum. It is waterproof and moisture-proof, non-slip, eco-friendly, anti-oxidation, high hardness, easy to clean, etc. Max load: 250 kg/550 lbs.

【 Smooth Transition within 1 5/8 in】: It is suitable for the threshold transition where the height difference between the floor/ carpet/ laminate and the ground is within 5/8 inch (1.7 cm) to 1 5/8 inch (4 cm).MAX 2" RISE. 4 in (10 cm) width.

【Easy Cut Installation 】: Length 36 inch, and you can trim it down to any length you need. And use super glue to paste the baseplate and the ground or drill 3 holes and install with screws. (PLEASE NOTE: the package does NOT include super glue and screws)

High Quality Door Sweep at an Value Price

Slotted Holes for Easy Installation and Comes with Matching ColorScrews

36" Long for gaps up to 1 1/8"

1 3/4" Seam Binder Hammered Finish

Can be used as a threshold, seam binder, or a transition between types of flooring

.08" High

Adjustable Height Oak and Aluminum Threshold with Durable Weatherseal

Weatherstrip In between Oak and Aluminum Sections Makes Contact with Bottom of Door When Door is Closed to Make Perfect Seal, Weatherstripping the Door Bottom. Keeping out Dirt, Dust, and Air. Saves Money on AC/Heating Costs While Helping Keeping Desired Temperature Inside.

5 3/4" Wide and Adjusts from 1 1/8" to 1 1/2" High. Adjusts Up or Down by Using the Screws in the Wood Section.

Size: 6"x60" ; Material: Quartz Natural Stone Mix

Micro Beveled on 2 long sides of the threshold

The picture seen is for representation only

L Shape Silver Door Bottom with Vinyl Seal 48" Long

For 1 1/4" - 2" Thick Doors

Works best on gaps between 1/4" - 9/16" between floor and door

Price For: Each Includes: #10 x 1-1/2" FH Stainless Steel Wood Screws Standards: ANSI/BHMA Certified A156.21 Finish: Aluminum Item: Saddle Threshold Height: 1/4" Length: 4 ft. Material: Aluminum Thickness: 0.125" Color: Silver ADA Compliant: ADA Compliant Fits Door Width: 48" Surface Type: Smooth Top Width: 2-1/2"

Country of Origin (subject to change): United States

Seals gaps that are about 5/8 inches long

Weathertight Seal

Protection against drafts, moisture and dust

What's this - Elegant aluminum floor transition strips provide a smooth transition between adjacent floors of similar height. This T-molding bridges the gap between laminate, hardwood, linoleum or stone floors for a seamless flow. An affordable solution for a seamless floor line

Aesthetically Appealing - Aluminum finish blends in with most flooring, slim T-shaped molding with 1/4 inch (0.63cm) height provides a barely noticeable transition while protecting edges of floors. And polished surface is easy to clean and maintain

Superior Material - Made of high-strength Grade 6063 aluminum alloy with thickness of 0.8mm only. Because the surface has been oxidized, it has the good performance of waterproof, anti-corrosion, anti-rust and easy to clean, for long-term use

【Thickened Aluminum Alloy】The door thresholds are constructed using a 1.5mm thick 6063-T5 aviation aluminum alloy. This thicken aluminum alloy ensures durability, rust-proofing, waterproofing, and easy cleaning. It exhibits high hardness and retains its shape without any deformation. These thresholds offer a robust solution for doorways, combining strength, protection, and low maintenance requirements.

【Anti-Slip Treatment】The Surface Of The Floor Transition Strip Is Treated With An 80μM Thickness Metal Powder Coating, Which Undergoes Anodic Oxidation Treatment. This Treatment Enhances Its Anti-Slip Properties, Making It Resistant To Wear And Ensuring No Paint Loss. The Anti-Slip Treatment Not Only Provides Safety But Also Offers Durability, Maintaining Its Effectiveness Over Time.

【Easy Installation】The carpet to tile transition strip offers effortless installation with no drilling needed. Simply measure the required length, mark it with an ink pen, cut it using a handheld cutter, and attach it using super glue (please note that super glue is not included). This straightforward installation process ensures a hassle-free experience when adding the transition strip to your carpet and tile surfaces.

【Smooth Transition】- Works best for height difference 1-5cm/0.4"-1.97" floors, for use in doorways, room entry ways or other locations where two uneven flooring surfaces meet.

【Sturdy Aluminum Structure】- Made of aerospace engineered alloy with a anodized finish is easy to clean. It's lightweight without lose strength, withstands high foot traffic areas in the home.

【Easy Install】- Simply use adhesive(Not included) to secure to the subfloor, no screws are needed to tighten. Can be cut to desired length with hack saw.

Safeguards edges of flooring

Comes with pre-drilled holes

Makes transition between surfaces of equal heights

Durable aluminum withstands high foot traffic areas in the home

For use in doorways, room entry ways or other locations where two uneven flooring surfaces meet

Screw Nails fit firmly in pre-drilled holes for easy installation

aluminum

aluminum treshold

High quality standard

❁ Heavy-duty Aluminum Alloy Material – The transition strip is crafted from high-quality aluminum alloy extremely durable, corrosion resistant and rust resistant, lightweight yet strong.

❁ Application Scope – It is suitable for the threshold transition where the height difference between the carpet / floor and the ground is within 0.5 cm (0.2 inch) to 1.8 cm (0.7 inch).

❁ Multipurpose Application – It is not only suitable for threshold transition between carpet and floor tiles, floor to carpet, carpet to floor and edge trimming decoration, but also for the decoration of wall skirts and frame edges.

【 36" Long Aluminum Transition Strip 】: Fits doors up to 36 inch wide. Heavy duty aluminum withstands high foot traffic areas in the home.

【 4 Inch Wide Floor Transition Strip 】: It is applicable to the floor transition with a height difference between 3/8 inch to 2 1/8 inch.

【 Easy to Cut & Installation 】: Cut easily with hacksaw. And can install it with superglue or drill holes for fixing with screws. (The package does not include superglue and screws.)

Price For: Each Includes: #10 x 1-1/2" FH Stainless Steel Wood Screws Standards: UL Classified UL10C, ANSI/BHMA Certified A156.21 Finish: Aluminum Insert Material: Vinyl Item: Threshold Height: 1/2" Material: Aluminum Thickness: 0.125" Color: Silver ADA Compliant: ADA Compliant Surface Type: Smooth/Fluted Top Width: 5" Fits Door Width: 72" Length: 6 ft.

Country of Origin (subject to change): United States