Best Traxxas Tire Foam Inserts in 2026

Multi-surface, all-road RC tires are direct fits for 1/7 infraction RC resto-mod street truck and 1/7 limitless RC speed roller

Mounted on Black, multi-spoke nylon wheels with 17mm hex for strength during extreme on-road or off-road driving action

Specially designed inserts with excellent support give the perfect balance of aggressive grip and easy A characteristics

【Unique Design】This rock crawling tires designed to fit for 1.0 beadlock wheel Axial SCX24

【Premium Material】Molded in the soft INJORA S5 compound, foam inserts included, flexible enough for sharp terrain

【Excellent Performance】Highly detailed connected side tread provides optimum side-hilling performance

Lightweight-Weighs less than liquid fills and thorn-resistant tubes

Easy installation-no gooey mess

Absolutely, positively, will not cause tire or tube to damage or loosen spokes

Product use precautions：This 1.9 inch foam insert tyres, it designed for RC Car 1/10 Axial SCX10 90047 D90 D110 TF2 Tamiya CC01 TRX-4 Traxxas Redcat SCX10 AXIAL RC4WD, etc. If you don't know will it fit on your truck please contact us feel free.

RC Wheels and Tires Size: The size of our 2.2 inch rubber tyres, Tyre inner diameter: 1.77'' (45mm) | Tyre outer diameter: 4.72'' (120mm) | Tyre width: 1.65'' (42mm). [Please make sure our RC tires and wheels are the correct sizes you are looking for before place order, to avoid the returns products and save your time due to inconsistent size.]

More Stable: Wider tires increase the wheel stability. Large, deep lugs and super soft tire provide exceptional traction in rock, mud, and dirt. Due to the special design surface texture, non-slipes, and stronger resistance.

SIMPLE INSTALLATION: This set is easy to install for any rider. Included in this set is everything you’ll need to get started, follow the instructions included in the package & you’ll be back on the trails in no time. Fits a 2.1"-2.6" tire.

RIM PROTECTION: The CushCore Pro Set is designed to keep your rims safe from big hits & harsh impacts by giving an extra layer of protection to your bicycle rims. Now you can ride hard with confidence that your rims will hold up to the big hits!

PRESTA VALVES: CushCore kits provide you with everything needed to boost the smoothness of your ride. A specially designed tubeless air valve is included with each insert; allowing air to move through the valve without being obstructed by the insert.

Product parameters: Size: 26’’×1.95(47-559); Pattern: H-5129; Weight: 1 LB; Max load: 198 LB; Min pressure: 270 Kpa (40 PSI); Max pressure: 440 Kpa (65 PSI).

Butyl rubber inner tubes: Made of high-quality rubber material to ensure good tightness, heat-resisting and durable. Featured with shock absorption and electrical insulating performance.

Dual compound for racing: Tread is made of 2 compounds, featured with lower rolling resistance and increased cornering and grip compared to single compound tires, Providing balance of grip and rolling resistance for cycling.

PREMIUM MATERIAL: Bike Tire Liner is made of high quality material which is durable, wear-resistant, lightweight and with strong anti-pressure ability.

PROTECT YOUR BIKE TIRE: Flat Proof Bicycle Tires is helpful to prevent your tire from puncturing by glass, thorns, nails, etc and protect your inner tube and extend the usage life of tire.

EASY TO INSTALL: bicycle tire liner is quick and easy to install, just stretch them over your rims and put them stay in place.

Dual Stage for Incredible Grip and Sidewall Support

Contoured to perfectly match Pro-Line's 2.2" XL Tires

Extremely Durable Closed Cell Foam

✔Compatible with Traxxas TRX4 Axial SCX10 SCX10 II RC4WD D90 D110 TF2 Tamiya CC01 Redcat Gen8 Gen7 and other Mostly Brands 1/10 Scale RC Crawler Car Truck, work with 1.9 Beadlock Wheels

✔Check size,Super Large Outer Diameter: 120mm / 4.72"; Inner Diameter: 52mm / 2.05"; Width: 45mm / 1.77"

✔The 1.9 Crawler Tires Made of Quality Rubber,quite soft, With Foam Inserts,High wear-resistant and excellent durability

Six pack tread pattern offers superior off-road performance on loose (dry and loamy), hard packed (dry), pavement or grass track conditions

2.8 MT tires with foam inserts Pre-mounted on Black 6-spoke plastic Rims

Tire outer diameter: 4.7 inch; tire width: 2.6 inch; wheel diameter: 2.8 inch; drive hex: 12mm; offset: 1/2 inch

If you have any problem, please kindly contact us freely!

One size Fits for mountain bike tire 24", 26", 29", LxW: 2300x34mm, Thickness: 1mm

Comes in pairs, for two tires. Made by high quality of Polyurethane, light weight and durable.

Made of High Quality Soft Rubber.

With Soft Well Flexbility Foam Insert.

Excellent lateral bite--incredible stickiness and exceptional traction.

Dual Layer Design: the crawler tire foams adopt the dual stage design for increasing grip, suitable for enhancing tire support, letting you have a nice driving experience, bringing convenience to your daily life

Appropriate for Most Tires: the tire foam inserts are suitable for tires with diameter of 1.9 inches, which can meet your various needs, please confirm the size before placing your order

Long Time Use: the crawler tire inserts are made of foam material, sturdy and reliable, comfortable and soft, not easy to break or tear; The colors are clear, not easy to fade, suitable for you to use for a long time

STOP FLATS & DAMAGED RIMS: Our patented foam insert is engineered to improve your riding while protecting your wheels with up to 20mm of rim saving protection.

FASTER ROLLING: Armour Tubeless is 3% faster than your standard tubeless set-up.

BETTER SIDE IMPACT AND CORNERING: Corner faster and harder without burping air from your tire.

Tire Outer Diameter: 4.56 inches/ 116mm; Tire Width:1.65 inches/ 42mm; Wheel Diameter: 3.22 inches/ 82mm; Wheel Drive Hex: 0.66 inches/ 17mm; Hub Center Hole Diameter: 0.47 inches/ 12mm

Suitable for 1/8 Buggy RC Off Road Vehicles

Compatible with Arrma Typhon, Losi, Kyosho, Exceed RC, Traxxas, Redcat, HSP, Tekno, Serpent, etc. Please Check Your Model’s Specs for Compatibility Before Buying

Compatible tyre size :26X1.25 、26X1.50、26X1.75、26X1.95、26X2.125、26X2.0

Soak the tire in hot water for 5-8 minutes before installation

Aggressive scale RC looks offer remarkable performance on a wide variety of surfaces

Officially licensed

Sticky R35 compound for more bite

🔥🔥 RC Car Tires and Wheels Size: 12mm Hex, both tires outer diameter: 3.38" (86 mm) |Tires Width: 1.26" 32.2mm(Front), 1.4" 36mm(Rear), "Please make sure this 12mm hex wheels and tires are the correct sizes you are looking for, to avoid the returns products and save your time due to the inconsistent size."

🔥🔥 Preglued-Ready to Use: This is an RC glued tires and wheels with soft foam Inserts, it saves your time to glue tire and wheel.Easy to install: Easy to replace, small size, easy to disassemble and install, more convenient to use. Due to the special design surface texture, non-slipes, and stronger resistance suitable for running on off-road, pavement, sand, grass, dirt, gravel, snow, etc.

🔥🔥 High-Quality Material: This is an Assembled 1/10 Scale RC Off-Road Buggy tires with foam inserts, ready to use. The material of these tires is taking high-quality soft rubber, and the wheels are made of high-quality nylon. That has increased the tires and wheels' durability, wear-resistant, practical.

4pcs RC Crawler 2.2 Mud Terrain Tires Super Grip Soft Tyre with Soft Foam Insert

Matterial: Butyl Rubber (it is better than common rubber,good heat resistance and good cold resistance. Design for professional RC crawler.)

Outer diameter (Height): about 145 mm ( about 5.7 inch )

Details:Virtually zero rolling resistanceExcellent traction in dry or wet conditionsLarge diamond shaped side knobs provide grip in cornersSmall thread knobs provide ultimate speed and traction

Increase control, durability, performance, and protection of your tires and wheels with the Vittoria Air-Liner MTB insert, designed for use in tubeless tires

The Air-Liner is a high-quality polymer insert, which replaces a portion of the air volume in the tire, allowing it to remain stable, grippy, and controlled even at low pressure

Durability: This highly durable polymer material has been tested to a projected life of 2000 hours under normal riding, or 1 full hour of run-flat downhill use under a typical rider. The Air-Liner is made of closed cell polymer and will not absorb sealant or moisture

Tire Outer Diameter: 4.48 inches/ 114mm; Inner Diameter: 3.26 inches/ 83mm; Tire Width: 1.65 inches/ 42mm; Wheel Drive Hex: 0.66 inches/ 17mm; Axle Hole Diameter: 0.47 inches/ 12mm

Suitable for 1/8 Buggy RC Off Road Cars

Compatible with Kyosho, Tamiya, Exceed RC, Traxxas, Arrma, Redcat, HSP, Tekno, Serpent, etc. Please Check Your Model’s Specs for Compatibility Before Buying

Here is another tyre option for your touring car model: these are rally block tyres with a soft compound, which provide a super grip especially in cooler driving conditions

Compatible with 26 mm wide wheels such as

B

HIGH QUALITY: This bike tire tube belt is made of high quality material polyurethane polymer , very durability, wear-resistant, lightweight and toughness with strong anti-pressure ability.

ANTI PUNCTURE: Designed to protect your bike tires from punctures, the bicycle puncture proof belt can help to prevent your tire from puncturing by glass, thorns, nails, etc.

EASY INSTALLATION: Installs easily between the tube and tire to offer powerful puncture protection, just stretch them over your rims and let them stay in place.

Item Name:2.2inch 125mm RC Wheel Tires

This high quality 2.2inch 125mm Tires fits for most 1:10 Rock crawlers cars,For 1/10 RC Crawler Car AXIAL Wraith 90048

Made of high quality rubber,high wear-resistant and excellent durability ! Come with 4pcs foam insert.

FEATURES: Slick design Foam inserts;INCLUDES: Two Rubber Front Tires for the Tamiya F104 Two foam inserts;REQUIRES: Installation on Wheels Tire Glue DTXR2000

DTXR2002

Quantity: 4 pcs rubber tires (with Foam insert)

Outer diameter(Height): about 63mm ( 2.48inch )

Inner Diameter: 48mm ( 1.89inch, fit for OD 52mm/2inch wheels rims )

🔥🔥【Compatible with Various Models】：These RC rock crawler tires fit for most 1/10 Scale RC Crawler, for example, Traxxas TRX4 Axial SCX10 SCX10 II RC4WD D90 D110 TF2 Tamiya CC01 Redcat Gen7 Car Wheel Rims Beadlock Wheels and so on, have good adaptability.

🔥🔥【Excellent Performance】：These RC crawler wheels are large, deep lugs, offer good grip, provide exceptional traction on all terrain, such as in normal roads, rock, mud, grass, loose dirt and creek bed, offering the best racing experience.

🔥🔥【High-Quality Materials】：These tires are made of soft rubber, plastic and foam inserts. And due to the environmentally friendly and strong material, these tires are more practical and durable. Furthermore, the tires have good traction and high wear resistance, so they have a long service life.

Anti-shock- This fixed gear bicycle tire is made of high-quality PU material, which is very strong and has good wear resistance and shock resistance, which can be used for a long time.

Non-slip-This is a bicycle tire that does not need to be inflated. The uneven pattern on the surface of the tire can make the moisture get rid of during riding, even on wet and slippery ground.

Suitable for-Suitable for all fixed gear tires of 700*23C, suitable for all bicycles of this model.24*1 3/8

4 TIRES PER ORDER & 1 Sticker Sheet

Fits Most 1" Wheels

(OD): 64mm / 2.48”