Best Jeep Gladiator Tonneau Covers in 2026

FITMENT - Compatible with 2020-2022 Jeep Gladiator JT | 5' (60") Bed

DESIGN - US patented. Cover is dual-coated and made out of heavy duty 24oz. marine-grade vinyl, with built-in horizontal crossbars that offer support when the cover is laid flat; and roll up with the tarp to provide full bed access when in need. Also comes with aircraft-grade aluminum side rails, and stainless steel clamps for mounting to the truck bed.

FEATURES - Seals with Velcro strip on the sides and secures with latch lock system at the tailgate. Tension system is available and can be adjusted on the end of the side rails to keep the cover tight and vinyl wrinkle-free in any weather conditions.

FITMENT - Compatible with 2020-2023 Jeep Gladiator JT | 5' (60") Bed | Fit models with or without Utility Track System

DESIGN - US patented. Cover is dual-coated and made out of heavy duty 24oz. marine-grade vinyl, with aircraft-grade aluminum frames, and comes with stainless steel clamps for easy installation and great durability.

FEATURES - Pre-assembled horizontal crossbars offer support and conveniently fold up with the cover providing full bed access when needed.

Fits 2015 - 2020 Ford F-150 6' 7" Bed (78.9")

100% BED ACCESS | The low-profile BAKFlip G2 hard folding cover allows you to drive with the cover fully closed, folded, or flipped up without covering the 3rd brake light

ENHANCED SECURITY | This cover features durable aluminum panels and an automatic latching system, providing greater security over vinyl covers. The G2 is operational from either side of the truck bed with quick-release cables under the panels

Fits 2015 - 2020 Ford F-150 5' 7" Bed (67.1")

ULTIMATE SECURITY | The BAKFlip MX4 tonneau cover has durable aluminum panels that automatically latch as the cover is partially or fully closed, and is fully locked once your tailgate is closed

STYLISH MATTE FINISH | Featuring matte-finished aluminum panels, protecting against marks, scratches and UV damage; as well as premium upgrades to the perimeter seals and hardware

100% Full Bed Access：Longs 5FT, Tri-Folding , fits 2020 2021 2022 Jeep Gladiator JT 5ft /60.3inch Bed with or without the utili-track system. Match your truck model perfectly and you can get the full bed access.

Easy Installation: All-in-one design. Integrated all components. Just put tonneau cover on your truck, Screw the front clamps, Clamp the rear ones. You can easily get the sleek cover.No Tools are required. In the majority of cases no drilling.

Heavy Duty Crossbars: With built-in 2 slightly bended crossbars that offer full support when the cover is lying flat,this ingenious design is to make the cover more smooth and more tense flat.

Fits 2014-2018, 19 Ltd/Legacy Chevy/GMC Silverado/Sierra, 2015-19 2500/3500HD 5' 9" Bed (69.3")

ULTIMATE SECURITY | The BAKFlip MX4 tonneau cover has durable aluminum panels that automatically latch as the cover is partially or fully closed, and is fully locked once your tailgate is closed

STYLISH MATTE FINISH | Featuring matte-finished aluminum panels, protecting against marks, scratches and UV damage; as well as premium upgrades to the perimeter seals and hardware

【PREFECT FIT】 OEDRO truck bed cover is compatible with 2020 2021 2022 2023 Jeep Gladiator| Fleetside 5 ft bed.

【SECURE YOUR TRUCK BED】 OEDRO’s Roll-Up truck bed cover provides your pick-up the perfect combination of security, convenience and appearance. With the tailgate latch lock system, hook and loop tapes sealed on both sides, your truck bed is instantly converted into a trunk 100% secured from snow, rain, UV and dust.

【HEAVY DUTY MATERIAL】 Composed of double layer PVC, OEDRO’s truck tonneau cover has been thoroughly tested for UV protection and superior tensile properties. Pre-assembled powder coated rails and aluminum clamps are included for trouble-free installation and formidable stability.

FITS PERFECT/EASY TO LATCH – ROLLITUP tonneau covers fit perfectly on your bed rails and each part number is specifically designed for your model truck! Our ROLLITUP has an easy to latch mechanism that closes and locks at the end of the tailgate. Each cover has an adjustable tension system, keeping your ROLLITUP tight and wrinkle-free in any weather condition.

BUILT TO LAST – Our cover is made out of heavy-duty 24-ounce tear-resistant, marine-grade vinyl, with 3 built-in crossbars that offer support when the cover is lying flat. Our side rails and clamps are made of 6063 aluminum, which is corrosion-resistant.

100 PERCENT BED ACCESS – When you’re ready to access your bed, the ROLLITUP allows you the ability to have full access to your bed, without the removal of your tonneau. Each ROLLITUP cover uses a Velcro Brand hook & loop strip on the sides and a one-step cable release to unlock the cover. 

【Precisely Fit】100% factory brand packaging; Each cover is custom-built to ensure precise compatibility with the 5' bed of 2020 2021 2022 2023 Jeep Gladiator.

【Easy Installation】No tools or drilling required; Upgraded clamps with adjustable holes allow for an easy installation within 20 minutes; user friendly design for easy assembly and dis-assembly.

【Safety First】Latch lock and adjustable tension system on the end of the side rails keep the cover close tightly; sturdy clamps and buckles with straps protect the cover from sliding or blowing off while driving.

Vehicle Compatibility - Tonneau cover compatible with Jeep Gladiator 2020-2023, Only fits models WITHOUT utility track system.

Great Protection - Come with [1] tonneau cover with adjustable tension and rubber weather seals, can withstand kinds of climate conditions and supply a great protection to your vehicle with metal support bar.

Solid Construction Design - It is made of attached aluminum frame to guarantee a long operate life in outdoor conditions, keeping the truck bed dry and secure.

Vehicle Compatibility - Tonneau cover compatible with Jeep Gladiator 2020-2023, Only fits without utility track system.

Great Protection - Come with [1] tonneau cover and [2] side mounting rails, can withstand kinds of climate conditions and supply a great protection to your vehicle with adjustable tension and rubber weather seals.

Solid Construction Design - It is made of vinyl frame to guarantee a long operate life in outdoor conditions, also has the elastic straps to secure cover in stored position.

FITMENT: DNA MOTORING Vinyl Soft Top Tri-Fold Tonneau Cover is Compatible with 2020-Present Jeep Gladiator 5.5 Ft Bed. Only Fits Models without Utility Track System

PLUG & PLAY: Easy to Install With Included Clamps. Adjustable Tension for the Perfect Fit. No Need to Cut or Drill into the Truck Bed, the Preassembled Unit Making the Installation Easier than Ever. Note: Vehicles with a bedliner installed may require modifications to install this product

INCREASE SPEED & SAVE GAS: Increases Trucks Aerodynamics at Speed. Gas Saving Benefit from a Covered Bed. Rubberized Edges to Seal. Bungie Cord Hook to Secure Down to Drive with Open Bed. Attached Aluminum Frame

FITMENT: DNA MOTORING Vinyl Soft Top Roll-up Tonneau Cover Compatible with 2020-2023 Jeep Gladiator; nly Fits Models without Utility Track System

PLUG & PLAY: Easy to Install With Included Clamps. Adjustable Tension for the Perfect Fit. No Need to Cut or Drill into the Truck Bed, the Preassembled Unit Making the Installation Easier than Ever. Note: Vehicles with a bedliner installed may require modifications to install this product.

INCREASE SPEED & SAVE GAS: Increases Trucks Aerodynamics at Speed. Gas Saving Benefit from a Covered Bed. Rubber Weather Seals Help Well Protected the Entire Bed.Elastic Straps to Secure Cover in Stored Position.

Fits 2020 - 2022 Jeep Gladiator, w/ Trail Rail System 5' Bed (60")

AMERICA’S #1 CHOICE | The best-selling roll-up truck bed cover in North America. Lo Pro’s tear-resistant, leather-grained vinyl provides superior weather resistance and comes standard with aircraft grade aluminum bows designed to take on a heavy snow load

SIGNATURE LOW PROFILE DESIGN | Sitting only 3/4” above the truck bed, Lo Pro is sleek and concealed. This roll-up truck bed cover mounts inside the rails of the truck bed, providing full access to stake pocket holes for use with additional accessories

Fits 2019 - 2023 Dodge Ram 1500, Does Not Fit w/ Multi-Function (Split) Tailgate 5' 7" Bed (67.4")

LEGENDARY VERSATILITY | Features overlander capabilities with our Trax Rail System and is compatible with virtually any T-Slot accessories allowing you to double your truck bed cargo capacity

LEGENDARY LIFETIME GUARANTEE | Easy to install and made in the USA, the RetraxPRO XR is so durable, we guarantee it for life. The PRO XR is also backed by our dedicated, US-Based customer support team

Perfect Fit: This soft tonneau cover Perfect Fits 2020-2023 Jeep Gladiator (JT) 5' Bed with or without the utili-track system.

Sturdy: KSCPRO Tri-Fold bed cover has 3 built-in horizontal crossbars offering good support when fully unfolded the cover. Heavy-duty aluminum frame, industrial-strength vinyl and superior perimeter sealing protect your cargo in any weather condition.

Durable: It is composed of double layer vinyl which has been thoroughly tested for UV protection and superior tensile properties. Pre-assembled powder coated rails and aluminum clamps are included for trouble-free installation and formidable stability.

Fits 2015 - 2022 Chevy/GMC Colorado/Canyon 5' 3" Bed (62.7")

EXPANDED STORAGE | This retractable cover features our Trax Rail System that is compatible with most T-Slot accessories, providing expanded cargo space to store your items and travel with ease.

SLEEK & DURABLE | Made from durable one-piece polycarbonate material and a powder-coated finish gives impact and scratch resistance as well as UV protection. The low-profile design sits flush to the truck bed with a sleek look & dependable seal.

Fits 2005-2021 Toyota Tacoma, 2007-2021 Toyota Tundra,Compatible with Jeep Gladiator,Ram Rail System. (Must Have Deck Rail System).

【Replaces Part & Model】Replaces# PT278-35160,PT278-35112,PT278-0C010,PT278-35111-Compatible with Toyota Tacoma Tundra models including years 2005-2021, and more. See below for detailed models. Connect bungee cord or a mesh storage system directly to the bed cleat. For classifying and holding your cargo in place without flying all over your trunk or hatch. It helps organize or store groceries, car gear, tools and other items, makes all the items secured without damaging them.

Easy to Install:Insert tie down bed cleat to bed rail system, then slide them to the right place

【Fitment】Our hard tri-fold truck bed tonneau cover fits for 5' 2019-2022 Gladiator JT truck bed

【High quality fiberglass】The hard folding tonneu cover is 100% brand new and made of fiberglass and PP Honeycomb, Hardness of FRP ≧ 30HBa, Compressive Strength of PP Honeycomb ≧ 1.4MPa, can withstand 2 tons, which is more scratch resistant and stronger than aluminum alloy. And obtained the US Design Patented.

【Easy to install】It is easy to install the tonneu cover. No drilling need. Simply fold from front and back, then lift up and off to gain full use of truck bed, the whole cover comes completely put together. The installation process only takes a few minutes. What's more, we also provide the installation instruction and mounting hardware.

Included: 4pcs* Rear Clamp/wrench.Easy installation, backup for the replacement.

Fitment: Fits Hard Tri-Folding or Hard Four-Folding Truck Bed Tonneau Cover, Soft Quad-Fold or Soft Tri-Fold Truck Bed Tonneau Cover, Soft Roll-Up Tonneau Cover,and so on.Not for Low Profile Hard Folding Truck Bed Tonneau Cover.

Materials: Made of Nylon glass fiber（PA66 GF30） and stainless steel, durability, and stability.T - Bolt welding part, well-made, firm, and reliable, not easy to break.

Easy Install: ARC Sport Bars are an easy, no drill install with step by step instructions for any DIY truck owner

Truck Fitment: This ARC Sport Bar works with Jeep Gladiator's outfitted with Rugged Ridge Armis Retractable Bed Cover (13550.34) or Roll-N-Lock Bed Cover.

Heavy Duty Design: Sturdy modular design out of 1”3/4 heavy duty tubing includes Laser cut center section with n-FAB logo. Finished in the highest quality textured black coating.

▶️ 【 Vehicle Specific for Precise Fitment 】 - Fit For 20-23 Jeep Gladiator 5Ft Bed Only. ***Please carefully check the compatibility information and make sure your truck model & bed size is correct for this tonneau cover before purchase.

▶️ 【 Hard Tri-Fold Design & Matte Black Finish 】 - The tri-fold tonneau cover enables you to put and pick up items conveniently without having to remove the whole bed cover; You can also keep it partially open to enjoy fresh air & wonderful view with your pet on the trip. Whole matte black color finish makes the bed cover more superior and reduces light reflection pollution in the night.

▶️ 【 Selected High Grade Material 】 - FRP Surface Panel + PP Honeycomb Core + Aluminum Rails/Frame: Brings a strong load bearing structure while reducing weight; Scratch resistant, abrasion resistant, impact resistant, heat resistant, ultraviolet resistant; Provides effective protection from rain, snow, dust, and theft, keeps your truck bed & luggage dry and secure during all seasons.

Compatibility：Compatible with 2005-2021 Toyota Tacoma, 2007-2021 Toyota Tundra, compatible with Jeep Gladiator, Ram Rail System. (Must have deck rail system).

Material：Made of strong black nylon plastic; The tie-down bed cleat measures approximately 6 ""x 1"" and can hold up to 110 pounds each.

Installation：Easy to install The tie-down bed cleat slides along your Tacoma's bed rail system, held in place by a spring-loaded, twist/locking clamp.

Includes:2 diamond nuts，2 front clamps, 2 back clamps,2T-bolts.

FITMENT：Compatible with CHEVY: Silverado / Sierra 1500, 2500, 3500; Dodge Dakota Ram; Ford F150 F250 F350 Ranger Maverick; MITSUBISHI: Raider; Nissan Frontier Titan; Toyota Tundra Tacoma; Jeep Gladiator JT bed cover and so on.

Materials: Made of Nylon glass fiber（PA66 GF30） and stainless steel, durability, and stability.T - Bolt welding part, well-made, firm, and reliable, not easy to break.

Compatible with Jeep Gladiator JT Year 2020, 2021 and 2022.

Material: Constructed by heavy duty 1/8 inch thick carbon steel. Textured black powder coat finish & Premium E-coating process for long last weather resistant performance.

Installation: Mounts to bed rails. Fully bolt-on installation. No drilling is required. Shipped Disassembled, Easy to install.

Easy on or off in less than six minutes.

Completely assembled in the box - no loose parts.

No tools are required.