Best Update International Tool Trays in 2026

ITEM SPECIFICATIONS: These light, portable metal socket organizers are 17 inches long, made of machined aluminum and come in 1/4-inch, 3/8-inch, and 1/2-inch drive. Each rail holds 16 metric or SAE sockets, and the socket clips have spring-loaded ball bearings to firmly hold sockets in place, even upside down. **Sockets are not included**

VERSATILITY: Every ARES socket rail is fully customizable, with removable end caps to allow for easier clip changes, in addition to being wall-mount ready. Whether you plan on using an ARES socket rail to assemble a socket set that will travel with you effortlessly or just want a way to keep your garage more organized, these socket organizers have you covered.

INTERCHANGEABLE: Our patented ball bearing socket clips glide over any of the aluminum socket rails, allowing you to mix and match your sets as you please. If you want to put a few 1/4-inch sockets on your 1/2-inch rail, you can.

ITEM SPECIFICATIONS: These light, portable metal socket organizers are 17 inches long, made of machined aluminum and come in 1/4-inch, 3/8-inch, and 1/2-inch drive. Each rail holds 16 metric or SAE sockets, and the socket clips have spring-loaded ball bearings to firmly hold sockets in place, even upside down. **Sockets are not included**

VERSATILITY: Every ARES socket rail is fully customizable, with removable end caps to allow for easier clip changes, in addition to being wall-mount ready. Whether you plan on using an ARES socket organizer to assemble a socket set that will travel with you effortlessly or just want a way to keep your garage more organized, these socket organizers have you covered.

INTERCHANGEABLE: Our patented ball bearing socket clips glide over any of the aluminum rails, allowing you to mix and match your sets as you please. If you want to put a few 1/4-inch sockets on your 1/2-inch socket organizer, you can.

ITEM SPECIFICATIONS: These light, portable metal socket organizers are 17 inches long, made of machined aluminum and come in 1/4-inch, 3/8-inch, and 1/2-inch drive. Each rail holds 16 metric or SAE sockets, and the socket clips have spring-loaded ball bearings to firmly hold sockets in place, even upside down. **Sockets are not included**

VERSATILITY: Every ARES socket rail is fully customizable, with removable end caps to allow for easier clip changes, in addition to being wall-mount ready. Whether you plan on using an ARES socket rail to assemble a socket set that will travel with you effortlessly or just want a way to keep your garage more organized, these socket organizers have you covered.

INTERCHANGEABLE: Our patented ball bearing socket clips glide over any of the aluminum socket rails, allowing you to mix and match your sets as you please. If you want to put a few 1/4-inch sockets on your 1/2-inch rail, you can.

ITEM SPECIFICATIONS: These light, portable metal socket organizers are 17 inches long, made of machined aluminum and come in 1/4-inch, 3/8-inch, and 1/2-inch drive. Each rail holds 16 metric or SAE sockets, and the socket clips have spring-loaded ball bearings to firmly hold sockets in place, even upside down. **Sockets are not included**

VERSATILITY: Every ARES socket rail is fully customizable, with removable end caps to allow for easier clip changes, in addition to being wall-mount ready. Whether you plan on using an ARES socket organizer to assemble a socket set that will travel with you effortlessly or just want a way to keep your garage more organized, these socket organizers have you covered.

INTERCHANGEABLE: Our patented ball bearing socket clips glide over any of the aluminum rails, allowing you to mix and match your sets as you please. If you want to put a few 1/4-inch sockets on your 1/2-inch socket organizer, you can.

ITEM SPECIFICATIONS: These light, portable metal socket organizers are 17 inches long, made of machined aluminum and come in 1/4-inch, 3/8-inch, and 1/2-inch drive. Each rail holds 16 metric or SAE sockets, and the socket clips have spring-loaded ball bearings to firmly hold sockets in place, even upside down. **Sockets are not included**

VERSATILITY: Every ARES socket rail is fully customizable, with removable end caps to allow for easier clip changes, in addition to being wall-mount ready. Whether you plan on using an ARES socket organizer to assemble a socket set that will travel with you effortlessly or just want a way to keep your garage more organized, these socket organizers have you covered.

INTERCHANGEABLE: Our patented ball bearing socket clips glide over any of the aluminum rails, allowing you to mix and match your sets as you please. If you want to put a few 1/4-inch sockets on your 1/2-inch socket organizer, you can.

ITEM SPECIFICATIONS: These light, portable metal socket organizers are 17 inches long, made of machined aluminum and come in 1/4-inch, 3/8-inch, and 1/2-inch drive. Each rail holds 16 metric or SAE sockets, and the socket clips have spring-loaded ball bearings to firmly hold sockets in place, even upside down. **Sockets are not included**

VERSATILITY: Every ARES socket rail is fully customizable, with removable end caps to allow for easier clip changes, in addition to being wall-mount ready. Whether you plan on using an ARES socket organizer to assemble a socket set that will travel with you effortlessly or just want a way to keep your garage more organized, these socket organizers have you covered.

INTERCHANGEABLE: Our patented ball bearing socket clips glide over any of the aluminum rails, allowing you to mix and match your sets as you please. If you want to put a few 1/4-inch sockets on your 1/2-inch socket organizer, you can.

INCLUDES: The ARES SOCKET VAULT socket organizer set comes with a reinforced injected plastic organizer tray, three 17-inch extruded aluminum socket rails, six measurement system sticker labels (SAE, metric, and Torx), and 17 1/4-inch drive, 17 3/8-inch drive and 16 1/2-inch drive spring loaded detent ball socket clips, allowing you to store up to 50 standard or impact sockets in one tray. **NOTE: Sockets not included.**

DESIGN: The organizer tray holds each rail firmly in place thanks to its dual locking cover plate design that also allow for easy removal. While locked into the tray, socket rails stay upright and organized in your tool drawer, and the locking tabs make rails easy to pop out to quickly grab the right socket rail for the job. The handle lips at either end of the tray make it easy to pick it up and take it anywhere.

INTERCHANGEABLE: Our patented spring loaded detent ball clips firmly hold sockets in place, even upside-down, allowing you to mix and match your sets as you please. Use the included measurement system stickers for easy-to-identify SAE, metric, and Torx organization, customize a set of rails with your most-used go-to sockets or adapters and end cap styles, or mix and match organizer colors for the perfect workshop look. For additional clips, see ARES 70081, 70082, 70083, 60050, 60051, and 60052.

ITEM SPECIFICATIONS: These light, portable metal socket organizers are 17 inches long, made of extruded aluminum and come in 1/4-inch, 3/8-inch, and 1/2-inch drive. Each rail holds 16 metric or SAE sockets, and the socket clips have spring-loaded ball bearings to firmly hold sockets in place, even upside down. Each rail also features locking end caps for added security. **Sockets are not included**

VERSATILITY: Every ARES socket rail is fully customizable, with removable end caps to allow for easier clip changes, in addition to being wall-mount ready. Whether you plan on using an ARES socket organizer to assemble a socket set that will travel with you effortlessly or just want a way to keep your tool box more organized, these socket organizers have you covered.

INTERCHANGEABLE: Our patented spring-loaded detent ball socket clips glide over any of the aluminum rails, allowing you to mix and match your sets as you please. If you want to put a few 1/4-inch sockets on your 1/2-inch socket organizer, you can. For additional 1/4-inch, 3/8-inch, and 1/2-inch drive clip sets, see ARES 70081, 70082, 70083, 60050, 60051, and 60052.

ITEM SPECIFICATIONS: These light, portable metal socket organizers are 9.84 inches long, made of machined aluminum and come in 3/8-inch and 1/2-inch drive. Each rail holds 10 metric or SAE sockets, and the socket clips have spring-loaded ball bearings to firmly hold sockets in place, even upside down. **Sockets are not included**

VERSATILITY: Every ARES socket rail is fully customizable, with removable end caps to allow for easier clip changes, in addition to being wall-mount ready. Whether you plan on using an ARES socket organizer to assemble a socket set that will travel with you effortlessly or just want a way to keep your garage more organized, these socket organizers have you covered.

INTERCHANGEABLE: Our patented ball bearing socket clips glide over any of the aluminum rails, allowing you to mix and match your sets as you please. If you want to put a few 1/4-inch sockets on your 1/2-inch socket organizer, you can.

ITEM SPECIFICATIONS: These light, portable metal socket organizers are 9.84 inches long, made of machined aluminum and come in 3/8-inch and 1/2-inch drive. Each rail holds 10 metric or SAE sockets, and the socket clips have spring-loaded ball bearings to firmly hold sockets in place, even upside down. **Sockets are not included**

VERSATILITY: Every ARES socket rail is fully customizable, with removable end caps to allow for easier clip changes, in addition to being wall-mount ready. Whether you plan on using an ARES socket organizer to assemble a socket set that will travel with you effortlessly or just want a way to keep your garage more organized, these socket organizers have you covered.

INTERCHANGEABLE: Our patented ball bearing socket clips glide over any of the aluminum rails, allowing you to mix and match your sets as you please. If you want to put a few 1/4-inch sockets on your 1/2-inch socket organizer, you can.

METRIC SOCKET ORGANIZERS: This set includes three blue metric magnetic socket organizers in 1/4-in drive, 3/8-in drive, and 1/2-in drive that allow you to store shallow and deep metric sockets. These organizers can be used with the following socket sizes: 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 21mm, 22mm, 23mm, 24mm, 25mm, 26mm, 27mm. *NOTE: Not designed to fit impact sockets.*

SAE SOCKET ORGANIZERS: This set also includes three red SAE magnetic socket organizers in 1/4-in drive, 3/8-in drive, and 1/2-in drive that allow you to store shallow and deep SAE sockets. These organizers can be used with the following socket sizes: 1/8-in, 5/32-in, 3/16-in, 7/32-in, 1/4-in, 9/32-in, 5/16-in, 11/32-in, 3/8-in, 7/16-in, 1/2-in, 9/16-in, 5/8-in, 11/16-in, 3/4-in, 13/16-in, 7/8-in, 15/16-in, 1-in, 1 1/16-in, 1 1/8-in, 1 3/16-in, 1 1/4-in. *Sockets not included with the holders.*

DESIGN CONSIDERATIONS: Each magnetic socket holder is designed to securely store both deep and shallow SAE sockets, while a soft, rubberized covering over the bottom of the tray prevents damage to finished surfaces. These portable socket holders are made from heavy duty, high impact plastic and feature powerful magnets to hold your sockets in place, so you can stick them on the side of your tool box. Your sockets aren’t going anywhere!

ITEM SPECIFICATIONS: These light, portable metal socket organizers are 9.84 inches long, made of machined aluminum and come in 3/8-inch and 1/2-inch drive. Each rail holds 10 metric or SAE sockets, and the socket clips have spring-loaded ball bearings to firmly hold sockets in place, even upside down. **Sockets are not included**

VERSATILITY: Every ARES socket rail is fully customizable, with removable end caps to allow for easier clip changes, in addition to being wall-mount ready. Whether you plan on using an ARES socket organizer to assemble a socket set that will travel with you effortlessly or just want a way to keep your garage more organized, these socket organizers have you covered.

INTERCHANGEABLE: Our patented ball bearing socket clips glide over any of the aluminum rails, allowing you to mix and match your sets as you please. If you want to put a few 1/4-inch sockets on your 1/2-inch socket organizer, you can.

DESIGN CONSIDERATIONS: This flexible magnetic mat helps prevent lost or misplaced parts, fasteners, and tools both in storage and on the job. Whether you want to use it to organize your toolbox drawer or use it on the side of the vehicle you're working on, this mat will conform to the surface it's placed on and keep tools and parts firmly in place.

QUALITY: Our flexible magnetic tool and parts mat is made of durable and easy-to-clean vinyl that will stand up to brake fluid, oil, gasoline, and most other chemicals in your garage. The vinyl construction also prevents damage to finished surfaces. Measuring 6.75 inches by 14 inches, this flexible mat is large enough to organize a tool drawer, but compact enough for on the job use, so you can use it anywhere there's ferrous metal.

COMMON APPLICATIONS: Keep nuts and bolts, parts, and small tools within reach of your work area. You’ll be able to mount the magnetic mat horizontally, vertically, or even upside down to hoods, fenders, or any other ferrous metal surface. It's also a great tool box and drawer organizer that will help ensure your tools stay exactly where you left them.

SPECIFICATIONS: This 80-piece socket holder comes with 20 1/4-inch drive, 30 3/8-inch drive and 30 1/2-inch drive socket holder clips. Each rail is 17 inches long and holds 20 metric or SAE sockets, so you can fit up to 80 sockets on this organizer! The clips have spring loaded ball bearings to firmly hold sockets in place, even upside-down, so you can trust the carrying handle to get all the sockets you put on this rack to the next jobsite safely.

WHY YOU NEED THESE: Without a socket organizer, sockets taken on the job in a tool box roll around and get lost easily, making it impossible to find the right socket for the job. This organizer eliminates the hassles of cheap rails whose clips and sockets fall off, with multiple secure rail tracks and spring-loaded ball bearings that keep sockets on their clips with ease. At home or at work, these storage rails won't let you down.

INTERCHANGEABLE: Our patented ball bearing clips glide over any of the rails, allowing you to mix and match your sets as you please. If you want to put a few 1/4-inch sockets on your 1/2-inch rail, you can. Check out ARES 70081, 70082, and 70083 for additional socket rail clips.

ITEM SPECIFICATIONS: This portable magnetic socket organizer is 12 inches long and comes with 12 3/8-inch drive socket clips that feature spring loaded ball bearings to firmly hold sockets in place, even upside down.

QUALITY CONSTRUCTION: Made of machined aluminum, this socket rail features strong magnets and will attach to any ferrous metal surface. With EVA foam on the bottom of the rail, your sockets can be safely placed on any work surface so you'll have them right at your finger tips without having to worry about damaging finished surfaces.

INTERCHANGEABLE: Our patented ball bearing clips glide over any of our aluminum rails, allowing you to mix and match your sets as you please. If you want to put a few 1/4-inch sockets on your 1/2-inch rail, you can. Check out ARES 70081, 70082, and 70083 for additional socket rail clips.

METRIC SOCKET ORGANIZERS: This set includes three black metric magnetic socket organizers in 1/4-in drive, 3/8-in drive, and 1/2-in drive that allow you to store shallow and deep metric sockets. These organizers can be used with the following socket sizes: 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 21mm, 22mm, 23mm, 24mm, 25mm, 26mm, 27mm. *NOTE: Not designed to fit impact sockets.*

SAE SOCKET ORGANIZERS: This set also includes three red SAE magnetic socket organizers in 1/4-in drive, 3/8-in drive, and 1/2-in drive that allow you to store shallow and deep SAE sockets. These organizers can be used with the following socket sizes: 1/8-in, 5/32-in, 3/16-in, 7/32-in, 1/4-in, 9/32-in, 5/16-in, 11/32-in, 3/8-in, 7/16-in, 1/2-in, 9/16-in, 5/8-in, 11/16-in, 3/4-in, 13/16-in, 7/8-in, 15/16-in, 1-in, 1 1/16-in, 1 1/8-in, 1 3/16-in, 1 1/4-in. *Sockets not included with the holders.*

DESIGN CONSIDERATIONS: Each magnetic socket holder is designed to securely store both deep and shallow SAE sockets, while a soft, rubberized covering over the bottom of the tray prevents damage to finished surfaces. These portable socket holders are made from heavy duty, high impact plastic and feature powerful magnets to hold your sockets in place, so you can stick them on the side of your tool box. Your sockets aren’t going anywhere!

ITEM SPECIFICATIONS: These light, portable metal socket organizers are 9.84 inches long, made of machined aluminum and come in 3/8-inch and 1/2-inch drive. Each rail holds 10 metric or SAE sockets, and the socket clips have spring-loaded ball bearings to firmly hold sockets in place, even upside down. **Sockets are not included**

VERSATILITY: Every ARES socket rail is fully customizable, with removable end caps to allow for easier clip changes, in addition to being wall-mount ready. Whether you plan on using an ARES socket organizer to assemble a socket set that will travel with you effortlessly or just want a way to keep your garage more organized, these socket organizers have you covered.

INTERCHANGEABLE: Our patented ball bearing socket clips glide over any of the aluminum rails, allowing you to mix and match your sets as you please. If you want to put a few 1/4-inch sockets on your 1/2-inch socket organizer, you can.

SPECIFICATIONS: This socket organizer set is a perfect organization system for your tool storage collection that makes it easy to store your most popular metric and SAE sockets, both standard and deep. Unlike other organizers, these trays feature vertical peg board designs that keep your sockets out of the tool box, immediately identifiable, and exactly where you need them. With this wide range of sizes, you can organize your tool chest with ease. *Sockets are not included with the holder.*

SIZES: This set includes 176 posts with one standard and one deep post for each size. 1/4” drive sizes include a metric range of 4mm to 15mm and an SAE range of 1/8” to 5/8”. 3/8” drive sizes include a metric range of 6mm to 20mm and an SAE range of 1/4" to 1". 1/2” drive sizes include a metric range of 10mm to 27mm and an SAE range of 3/8” to 1-1/4”. For a complete list of included posts, please reference this item’s images for a comprehensive table of sizes.

DESIGN: These socket organizers make managing sockets simple; each tray’s vertical posts secure sockets and feature size markings for easy identification. With their unique 2-tray designs for superior organization and mobility, the ½” organizers offer more extensive 1/2” socket storage than most other sets, with room for 26mm and 1-3/16” shallow and deep sockets. These trays are constructed of durable ABS resin to resist oil and grease, so you can use them with confidence anywhere.