Best Generic Transmissions in 2026

12 fluid ounces

Genuine OEM Honda Part

Replaces 08208-HST01

Size: 18x14mm Weight:15g 6pcs/Set

Material: High wear-resistant nylon

Heavier roller weights= A slower take off speed and a higher top speed.

Micro size, light weight

Compatible with more types of RX

Plug and play, ready to fly, perfect for DIY

The number one selling name ins RTR

Innovative designa and engineering

Made using only the highest quality components

FRONT CARGO BASKET – Perfect to haul items on your ATV, the Guide Gear ATV Front Cargo Basket instantly increases your carrying capacity. It has you covered for carrying items you'd normally have to leave behind.

STURDY STEEL CONSTRUCTION – A rugged metal construction makes this steel cargo carrier basket for ATV strong and long-lasting. It will stand up well to tough wear and tear. Measures 36"l. x 17"w. x 5.25"h.

SIDE RAILS KEEP GEAR SECURE – 14-ga. steel mesh sides keep the gear secure and provide tie-down points to this ATV cargo carrier rack. 3/4" square steel tubing adds support and stability to the basket.

Structural Parameters: Gearbox Shaft Size: 5/8"; Keyway : 3/16"; Forward Ratio: 1: 1.3; Reverse Ratio: 1: 2.6; RPM: 2300; Shifter Cable Length: 51.18"/130 cm.

Quality Metal: This go-kart gearbox is made of high-quality metal, wear-resistant and lightweight. It provides precise torque and a long lifetime.

Three Shift Modes: Our go-kart gearbox kit has three shift modes: forward, reverse, and neutral. It allows for convenient and easy operation.

▶Gearbox Kit 30 Series -This forward reverse gearbox is suitable for go-karts,utility vehicles and other applications with engines up to 14HP and # 35 chain 12T and #40/41/420 chain 10T (Both sprockets included).Please note only use on 30 Series

▶Standard Adaptation Parameters-Shaft Size: 5/8" with 3/16" keyway; Gearbox Speed: 5/13 of the Clutch speed; Shifter Cable Length: 1540mm  ( 5' )  ( 60'' ).Forward Ratio: 1:1:3,Reverse Ratio: 1:2:6

▶Complete Accessories-1x Forward / Reverse Gearbox with 3/16" Keyway;2x Mounting Plates;1x Shifter Disc;2x Shifter Cable;1x 10T and 12T Sprocket;1x Shifter Assembly

Outer Diameter(drive face):111mm/4.37",Hole distance on drive face:80mm/3.15"(Please refer to the second picture)

Replacement for most of the makes and models of chinese GY6 125cc 150cc roller 152 QMI 157QMJ scooter

Complete variator assy,roller weight:14gram each

Fit for 43/47/49cc 2-stroke Pocket Mini Bike / Scooter / ATV.

The reduction box comes with clutch and 11,13,14,17,20 teeth total 5 pcs of sprocket.The sprocket fits T8F chain only.

Reduction Ratio: 3 to 1 chain reducer.

Replacement for GY6 49cc 50cc 80cc 100cc Moped Scooter

Fit for 139QMB or P139QMB engine

Shaft length:51mm/2";Shaft diameter at splines:13mm/0.51"

Heavy duty reduction box twin-chain design for bigger torque transmission than standard reduction box with single chains.

The reduction box comes with clutch(the bore on the clutch:1/2 inch=12.7mm) and 11/13/14/17/20 teeth total 5 pcs of sprockets.The sprocket fits T8F chain(8 pitch) only.

Reduction Ratio: 3 to 1 chain reducer. Please confirm size of your original part. This is 91mm, not 116mm. We marked the size in the last picture

Size: 16x13mm Weight:8g 6pcs/Set

Material: High Temperature Resistant and Wear-resisting Nylon Material Shell

Heavier Sliding Roller Weights= A Slower Take Off Speed with More Acceleration and A Higher Top Speed.

Precision transmission shroud allows you to cover the wrinkle black outer transmission on Milwaukee-Eight powerplants; Use alone or combine with other Kuryakyn Precision series parts for a total custom package

Features a single-piece, bolt-on design cast from quality aluminum and form-fitted to seamlessly cover the outer casing for a complete transformation

Easy to install; May require memoval and reinstallation of the rear exhaust heat shield

Transmission reduction gear box assembly silver

11 teeth gearbox ,not 14teeth one(please check with your stock one before purchase)

Speed ratio 3:1

For schematic location 10 only

See product description below for vehicle fitment or to verify fitment for your specific vehicle, please contact us, and provide us with your VIN that can be found on your vehicle or your insurance card.

Polaris Engineered service parts deliver unmatched performance and fit for your vehicle. Each one is meticulously crafted to match your machine and has been extensively tested in the field so you can ride with 100% confidence.

Put the finishing touch on your cast transmission case and nicely complement existing chrome engine components

Trasmission shroud allows you to transform the right side of your Twin Cam engine

Designed durable with a chrome finish

Easy installation

Repair your Four-Wheel-Drive system for a fraction of the cost of the complete servo assembly.

Feel the pride of repairing your own equipment with an EASY DIY FIX.

Don't sweat it, we are here to help if you have any questions.

※Output Shaft OD: 5mm

※Transmission internal gear: 18T,30T input gears ,36T output gear

※Anodized black for durability, corrosion resistance, and aesthetics

Precision-machined from gear quality steel and heat-treated for smooth operation and durability

Fits: Transmission Gear Box Main Counter Shaft Parts For Chinese YX110 YX125 YX 110cc 125cc Engine Motorcycle Pit Dirt Motor Bike

Guaranteed Good Quality & Made From the Highest Quality Materials Available

Always Responsible Customer Service

Transform the right side of your awesome Twin Cam engine with these easy to install, luxurious covers.

High-quality, show-chromed, die-cast construction

Suitable for all bikes equipped with stock head pipes or aftermarket True Dual pipes.

New OEM Polaris Hub Wheel Rear Mach

OEM Part Number: 5135113

Item only fits specific models listed. The picture could be generic.

New OEM Arctic Cat Kit Cv Boot Universal

OEM Part Number: 1436-207 (QTY 1)

Item only fits specific models listed. The picture could be generic.

Suit for :Axial SCX10 90027 SCX10 II 90046 Wraith 1/10 RC Crawler Ca Upgrade Parts

Aluminum Alloy Case, the internal parts are alloy also. Complete gearbox, gear inside, directly Assemble that can use

Note:Reverse Transmission Gearbox only, no others included.

Eliminates all OEM Electronics involving 4WD Actuator, Factory installed look, LED light, 4WD lever, Front Diff lock lever, Visit - FacebookSgroiInnovations - to see years of Customer posts, photos and comments

All Brute Force / Prairie / 2004 Suzuki Twin Peaks LT-V700F

Replaces OEM part numbers: 16172-0039 & 16172-0037

♠♠♠Brand new: Brand new 6-tooth T8F clutch bell housing gearbox. Professional manufacturing, stable performance and high reliability.

♠♠♠Note: For detailed product parameters, refer to the instructions. Please confirm whether the product is suitable for your equipment before ordering, I wish you a happy life

♠♠♠Application: This 49cc gearbox is suitable for 33CC 36CC 43CC 47CC 49CC Mini Moto petrol scooter chopper ATV gy Go kart.

FITMENT: HAKA TOUGH rzr ranger general inner clutch cover fits for Polaris RZR XP 1000 2016-2021 ; Polaris Ranger Crew XP 1000 2017-2018 ; Polaris Ranger Crew XP 900 2017-2019 ; Polaris General 1000 2016-2021;direct replacement for OEM #2635158 ,2635822, 2634229(Please refer to the compatible list in the description)

UPGRADE MATERIAL: The rzr inner CVT clutch cover is made of high quality polyethylene plastic,with good corrosion resistance, chemical resistance,flexibility,impact resistance,and temperature resistance.It is very light and will not break easily.

GOOD PROTECTION FOR YOUR CLUTCH: Protect the clutch and gearbox to prevent foreign objects such as fallen leaves, mud, grit, etc. from entering. The rzr ranger inner variator clutch cover also has a good waterproof effect. Thereby effectively extending the service life of the clutch and gearbox.

★ Made from premium 6061-T6 billet aluminum, lightweight and sturdy.

★ Machined by the latest-generation CNC technology that ensures high accuracy for a perfect fit.

★ Effectively protect the transmission top and side from rocks, gravel or any other solid objects.

Fitment: 2008 - 2013 Touring models (FLHR) , 2008 - up Softail models, 2006 - up Dyna models, Cable styles fit 2008-2013 Touring models,

Carved from 6061 T-6 billet aluminum. Cable style cover mounts on top of OEM hydraulic unit

Cable style cover replaces OEM cover Includes necessary gaskets and hardware. Chrome finish. Matching transmission top covers sold separately.