Best Magnus Tripods in 2026

Supports 8.8 lb (4 kg) | 65mm Ball Diameter | 2-Stage Leg Design

Height Adjustment Range - 27.6" to 59" | Middle Spreader | Fixed Counter Balance

Fixed Pan / Tilt Drag | +20/-25mm Slide Range | Lightweight Tripods | With Quick Release Plate

Portable Video Tripod System | Supports DSLRs, Small | Large Camcorders | 15 lb Weight Capacity, 64.3" Max Height | Built-In Pan/Tilt Video Head | Independent Pan and Tilt Locks

Quick-Release Camera Plate Included | Integrated Center-Column & Mid-Spreader

Two Leg Stages, Three Sections | Flip-Lock Leg Locks | Carry Case with Shoulder Strap Included

Portable Video Tripod System; Supports DSLRs, Small/Large Camcorders

15 lb Weight Capacity, 82" Max Height; Built-In Pan/Tilt Video Head

Independent Pan & Tilt Locks; Quick Release Camera Plate Included

QR Plate for VT-4000 Tripod

1-Year Warranty

STEPPED FLUID TILT & PAN DRAG - The head features three steps of counterbalance that can be adjusted based on the size and weight of your camera and the needs of the shot - Both pan and tilt each feature three steps of drag plus a 0-setting that allows you to have the head completely free if you want

SLIDING BALANCE PLATE - The sliding balance camera plate features a spring-loaded locating pin and supports both 1/4"-20 and 3/8"-16 camera tie-down screws (included) - The camera plate features 3.25" of travel, providing a wide range of movement to balance your camera on the head for optimum operation

MID-LEVEL SPREADER - The included mid-level spreader is adjustable, allowing you to spread the legs for a more stable shot or draw them close to gain height. The legs can be closed with the spreader attached - The legs feature independent leg spread and height adjustment, useful for working on even surfaces such as rocky terrain or stairs

VARIABLE FLUID TILT & FIXED PAN DRAG: The head features spring-loaded counterbalance with pan and tilt fluid drag. Tilt drag is variable and can be adjusted to provide more or less drag, allowing you to fine-tune the head to match the needs of the shot

SLIDING BALANCE PLATE: The sliding balance camera plate features a spring-loaded locating pin and supports both 1/4"-20 and 3/8"-16 camera tie-down screws (included) - The camera plate features 3.25" of travel, providing a wide range of movement to balance your camera on the head for optimum operation

MID LEVEL SPREADER: The included mid-level spreader is adjustable, allowing you to spread the legs for a more stable shot or draw them close to gain height. The legs can be closed with the spreader attached - The legs feature independent leg spread and height adjustment, useful for working on even surfaces such as rocky terrain or stairs

Execute Smooth Tracking Shots | 2" Ball Bearing Metal / Rubber Wheels | Fits Any Tripod

33 lb Load Capacity | Adjustable Diameter | 31" Doorway Width

Compact - Folds to Just 17 x 5" | Step-On Locks for Wheels | Lightweight - with Carrying Handle

Supports 4.4 lb | 2-Way Pan Head | 3-Section Leg Design

Height Range - 18.6 to 59" | Separate Pan/Tilt Locks | Mid-Level Spreader

Built-In Bubble Level | With Quick-Release Plate | Gear-Driven Center Column

Load Capacity: 13.2 lb * Maximum Height: 62.5" * Minimum Height: 16.5" * Folded Length: 18.2"

Arca-type-compatible ball head, which includes a quick release plate, with dual-action locking knobs for the ball and the pan

Ball head has a load capacity of 13.2 lb, and the head can be rotated 360° and it can be moved into a 90° angle

Supports 15 lb | 2-Way Fluid Pan Head | 3-Section Leg Design

Height Range - 22" to 64" | Separate Pan/Tilt Locks | Mid-Level Spreader

Built-In Bubble Level | With Quick-Release Plate | Gear-Driven Center Column

Two-Stage Aluminum Tripod * Two-Way Fluid Head / 360° Pan Range * 8.8 lb Payload & 59" Max Height

Retractable Rubber Feet & Ground Spikes * Mid-Level Spreader & Carrying Case * Record and Zoom LANC Controller

Pan Bar Mounting Clamp * Pressure-Sensitive Zoom Rocker Switch * Variable Speed Zoom Control

QR Plate for VT-3000 Tripod

For Use With VT-4000 Tripod

10 lb Load Capacity; 3-Way Pan and Tilt Head

Center Column Converts to Monopod; Quick Release Plate

27" to 73" Tripod Height Range; 3-Section Tripod Legs

Supports 6.6 lb | 2-Way Pan Head | 3-Section Leg Design

Height Range - 21.7 to 60" | Separate Pan/Tilt Locks | Mid-Level Spreader

Built-In Bubble Level | With Quick-Release Plate | Gear-Driven Center Column

TWO-STAGE TRIPOD: This rugged two-stage tripod offers rigidity and strength for your camera and gear weighing up to 11 lb. Snap locks allow for a fast, effortless setup and a Height Adjustment of 30 to 63.5" Range

FLUID HEAD: The VT-4000-PRO-2 fluid head delivers uniform and even panning and tilting for smooth camera motion so your video will look steady and professional. With tilt drag control, you can dial in the exact amount of resistance for your shot

SPRING-LOADED COUNTERBALANCE: The spring-loaded counterbalance provides extra security for your camera or rig with tension that works against your camera's tilt. This prevents your camera from tipping over and offers extra tension for a smoother tilt motion

Bendable Legs | Supports Up to 1.1 lb (0.5 kg) | Ideal for Compact Cameras

Universal 1/4"-20 Mounting Thread | Stable Sure-Grip Rubber Tripod Feet | Integrated Pocket Clip

Extremely Portable | Weighs 1.7 oz (48 g) | Maximum Closed Height of 4.9" (12 cm)

Load Capacity: 2.2 lb, Maximum Height: 11.6" | Minimum Height: 7.0", Folded Length: 8.3"

Leg Sections: 3, Weight: 14.6 oz | Aluminum Alloy Legs, Twist Locks, 3-Way, Pan-and-Tilt Head, 1/4"-20 Mount | Bubble Level, Anti-Rotation Pin, Carry Pouch

Supports up to 2.2 lb | Push-and-pull center column with twist lock for rapid camera, sport optic, or camcorder positioning | Can be set for a minimum height of 7.0" to a maximum height of 9.0", or 11.6" with column fully raised