Best Left Truck Bed Toolboxes in 2026

Fits 2019 - 2022 Chevy/GMC Silverado/Sierra 1500 Drivers Side

TRUCK BED COVER COMPATIBLE | The UnderCover SwingCase maintains a 3-inch clearance from the truck bed & works with virtually all tonneau covers: soft, hard, folding, and rolling

ULTIMATE ACCESSIBILITY | This toolbox swings out nearly 180° towards you for easy access from the tailgate & swings back into a locking position over the wheel well for maximum bed access

【Strength & Durability】Truck tool box lock constructed from the highest quality industrial grade materials, heavy duty rust-resistant 304 stainless steel with a polished finish, made to handle the toughest conditions.

【Wide Applications】This truck tool box lock replacement can be used for electrical cabinet, toolbox, power distribution cabinets, control cabinets, vehicles tool box, caravan, truck, trailer, UTV, ATV, RV, UWS toolbox and dog box.

【Easy to Install】Comes with blind rivets, you can install it in a few minutes, Easily Replace your broken or worn latches.

YHTAUTO Truck bed tool box designed specifically for pickup trucks, it comes with a number of practical features that make it ideal for storing and organizing your tools

Each of truck toolbox holds up to 33 lbs of tools and gear or other things, for security, this tool box features one built-in lock for safe and secure storage

Replacement for Chevrolet Silverado 2007-2019, Replacement for GMC Sierra 2007-2019, input your make, model, year and trim level into the amazon garage tool to verify if it fits your car

Upgraded Security to Exceed Your Expectations: Can't find a truck bed toolbox to keep your equipment? Don't worry; you can lock everything up with VEVOR. The innovative lockable box keeps your gear secure and protected from the elements. Our anti-theft system will be infallible to any attempt to remove it. Keep the good times rolling with VEVOR.

Toughness that Can't Be Matched: High-quality ABS composite material makes the VEVOR truck bed storage box lightweight while maintaining rigidness and durability. It protects your belongings against strong wind, water, and dust, and even stands up well to sun exposure. Temperature resistance range: -68℉-+158℉/-20℃-+70℃. Don't let the elements ruin your day. As sleek as it gets while easy to clean and maintain!

Ultimate Accessibility Just For You: Mount the truck bed box to the wall of the bedrail on either the left or right side. Simply pull the latch to make it pivot 180 degrees, offering instant access. Leave it folded up when not in use, not taking away any precious cargo space. It always stays in place no matter how fast you are driving!

▶️ Compatible with 02-18 Dodge Ram 1500, 03-18 Dodge Ram 2500 3500(Fits Models with Fleetside Truck Beds)

▶️ Matte Black Surface Finish Wheel Well Lock Box w/Removalbe Tray, Box is Easily Removable off the Hinges for Transport

▶️ Made with Heavy Duty ABS Plastic Construction, Box Can Support the Weight of 75LB. Mounting Hardware with Eyelet to Secure Box to Bed

COMPATIBILITY: Compatible For Ford F250 F350 Super Duty 2017-2020.

OE REPLACEMENT: Directly Fit. Hardwares all are included.

ULTIMATE ACCESSIBILITY: This toolbox swings out nearly 180° towards you for easy access from the tailgate & swings back into a locking position over the wheel well for maximum bed access.

COMPATIBILITY: Compatible For Chevy Silverado GMC Sierra 1500 2500 3500 2007-2018.

OE REPLACEMENT: Directly Fit. Hardwares all are included.

ULTIMATE ACCESSIBILITY: This toolbox swings out nearly 180° towards you for easy access from the tailgate & swings back into a locking position over the wheel well for maximum bed access.

COMPATIBILITY: Replacement For 2002-2018 Dodge Ram 1500 2500 3500.

OE REPLACEMENT: Directly Fit. Hardwares all are included.

ULTIMATE ACCESSIBILITY: This toolbox swings out nearly 180° towards you for easy access from the tailgate & swings back into a locking position over the wheel well for maximum bed access.

COMPATIBILITY - Compatible with 2007-2018 GMC Sierra 1500 2500 3500/2007-2018 Chevy Silverado 1500 2500 3500/2019 Silverado 1500 & Sierra Legacy / Limited Only

Material - High quality ABS composite material can protect your goods from strong wind, water, dust and sunlight.

Thoughtful design - The storage box has a lockable key cover, which can be safely placed on your trunk. It can be sealed well against moisture and bad weather.

Incredible Fit: Replacement for Dodge Ram 1500/Ram 2500/Ram 3500 2002-2018 trucks driver side, it is worth noting that does not fit rambox and 2013-2015 Ram 3500 factory tow package; Works with almost any tonneau cover, quick installation with eyelets to easily secure the case to the bed

Lockable Truck Bed Toolbox: Not sure where to store your equipment? Don't worry, you can lock everything away with YHTAUTO's truck bed toolbox. The innovative lockable case will keep your gear safe

Unmatched Toughness. The superior quality ABS composite material makes the YHTAUTO truck bed storage box not only durable but also lightweight. It protects your belongings from strong winds, rain and dust, and can even withstand the sun's rays. Don't let the elements ruin your day

Built for A Lifetime: Stripe tread pattern reinforces the aluminum material for maximum strength and longevity. Rust and corrosion resistant construction offer years of dependability.

Secure and Protective: A stainless steel latch keeps your tools and supplies secure, protecting against theft and weather elements. A weather guard rubber seal prevents moisture or water from seeping through, ensuring your tools stay dry.

Perfect Tool Cabinet for Anywhere: This tool box can be mounted on a hitch rack, cargo rack of your camper, perfect for the tongue of your enclosed trailer, suitable to be installed on the rear of your RV for extra storage. Widely used: From snow and ice equipment to toolboxes, hydraulics, towing, truck, trailer hardware and Stage sound box storage.

【Advantage】Durable and ergonomic construction:Truck tool box latch Constructed of Heavy Duty Rust-Resistant Stainless Steel with a polished finish; made to handle the toughest conditions.The surface treatment is bright chrome plating / polishing,Rust free and has a long service life.

【Easy Install】The Tool Box Latch for Truck , RV, Trailer, ATV, UTV Tool Box or Dog Box is easily replace your broken or worn latches, and you just takes a few minutes to install. Manufactured according to strict quality control standards, improved design to improve durability.

【Size】Outside dimensions 4-3/8" x 3-1/4"; Locking Paddle Latches Handle with Keys.

Overall Size：39"(L) x 13"(W) x 10"(H) ；Please choose the appropriate size according to your own use

Stainless steel security lock keeps your contents secure. Comes with keys and side handles that provide an easy grip.Durable aluminum construction with a diamond tread pattern and polished finish resists corrosion and offers several years of long-lasting use. Hand welded seams provide extra strength and durability.

Fold up doors provide full access to all contents within the box, making this tool box easy and convenient to use at job sites or camp grounds.Doors feature a tight seal that prevents moisture or water from seeping in, protecting your tools and supplies from damage due to harsh weather.

Heavy Duty ABS Plastic Construction, Matte Black Finish

Removable Tray, Sealed Lid to Keep Moisture Out, Lid with Built in Lock & Key

Box is Easily Removable off the Hinges for Transport

Compatibility - Compatible with 2017-2023 Ford F-250 F-350 Super Duty

Thoughtful Design - The storage box has a lockable key cover, which can be safely placed on your trunk. It can be sealed well against moisture and bad weather.

Easy To Install - 1. Connect The Connection Bracket To The Side Mounting Bracket 2. Fasten The Bracket To The Car Body With M8 Bolt And M8 Nuta And Make A Mark At Other Hole And Then Remove The Bracket And Drill Hole On The Mark 3. Put The Rivet Nut Into The Hole And Faster The Bracket With Hand Nut Holder 4. Fasten The Whole Bracket To The Car Body According To The Other Hold 5. Put The Plastic Shaft Pin In Correct Position 6. Put The Storage Box In Correct Position 7. Installation Finish

Incredible Fit: Replacement for Chevrolet Colorado & GMC Canyon 2015-2021 trucks driver side, Works with almost any tonneau cover. Quick installation with eyelets to easily secure the case to the bed

Lockable Truck Bed Toolbox: Not sure where to store your equipment? Don't worry, you can lock everything away with YHTAUTO's truck bed toolbox. The innovative lockable case will keep your gear safe

Unmatched Toughness. The superior quality ABS composite material makes the YHTAUTO truck bed storage box not only durable but also lightweight. It protects your belongings from strong winds, rain and dust, and can even withstand the sun's rays. Don't let the elements ruin your day

Incredible Fit: Replacement for Chevrolet Silverado GMC Sierra 1999-2006(2007 for Classic), Works with almost any tonneau cover. Quick installation with the case can be easily fixed to the bed using the installation we give you

Lockable Truck Bed Toolbox: Not sure where to store your equipment? Don't worry about it, you can lock everything away with YHTAUTO's truck bed toolbox. The lockable storage tool box will keep your gear safe

Unmatched Toughness. The superior quality ABS composite material makes the YHTAUTO truck bed storage box not only durable but also lightweight. It protects your belongings from strong winds, rain and dust, and can even withstand the sun's rays. Don't let the elements ruin your day

Heavy Duty ABS Plastic Construction; 75LB Capacity

Removable Tray; Sealed Lid to Keep Moisture Out

Lid with Built in Lock & Key

【Fitments】For Ford F-150 2015-2022

【Lockable & Waterproof】Our lockable truck bed storage toolbox is has a key-lockable lid.It features an organizational tray, as well as a moisture seal to help keep contents dry and protected against the elements.

【Material】Made of high quality ABS for long-lasting durability. Box can support the weight of 75 lbs.There are fixed points to close together, so they don't wobble as the car shakes. Sturdy and durable.

[Size]: 30"(L) x 13"(W) x 10"(H) Overall Size, Perfect for storing your Tools in your Vehicle or at Home.

[Exquisite Workmanship and Smooth Surface]: We pay special attention to the workmanship. In order to prevent the hand from being scratched, the welding seam between the edges of the aluminum box is very smooth and there is no protruding sharp edge.

[Ideal Storage Box for Limited Space]: This tool box is constructed of heavy duty textured aluminum for maximum durability. The door features a over-hanging lip which resists water from getting inside.

Swing-out storage container lockable Lid. Replacement Truck Bed Storage Box Case Tool Box; Material: PP / ABS+TPO , Weight: 12.9lb(Only body + support frame) ; Package Includes: Storage Box with Lock, Mounting Hardware.

Perfect storage solution for truck bed space : Avoid sacrificing the floor deck space to keep the tools well-organized, and no need to reach over or climbe into your truck bed to get your tools.

INSTALLATION : Installation can refer to the video. (tips)Do not try to install your car if the vehicle model is not within the range of described adaptation years.The Storage Box will work For Chevy Silverado GMC Sierra 2007-2018 Driver Side.

[Overall Size] 39"(L) x 13"(W) x 10"(H)

[Material ] This tool box is constructed of heavy duty textured aluminum for maximum durability.

[Surface Finish] Powder coated Black Aluminum; Diamond Plate Pattern Strengthens the Aluminum for Maximum Durability

【Custom Designed】Perfect match for the vehicles. Compatible with Chevrolet Silverado 1500 2019-2021; GMC Sierra 1500 2019-2021---Rear Left (Driver Side)

【Easy to Install】Quick and easy installation, requiring no special tools; Sturdy, durable and flexible

【Specification】Reference Number: SC104D; Package Includes: Storage Box with Lock, Mounting Hardware; Material: PP+TPO; Length: 30.71 inch; Width: 9.06 inch; Height: 15.35 inch; Weight: 8.99

FIVE DRAWERS. Keep small tools better organized with the five truck bed drawers of this tool box. The drawers are made from commercial-grade, injected plastic (includes two 2-inch x 4-3/8-inch x 19-inch and three 3-inch x 4-3/8-inch x 19-inch drawers)

SMOOTH OPERATION. The integrated truck bed storage drawers roll on drawer slides with stainless steel ball bearings, ensuring long-lasting use and smooth operation

EXTRA-THICK ALUMINUM. UWS aluminum truck tool boxes are constructed with thicker aluminum compared to most aluminum tool boxes. This gloss black drawer truck tool box features a one-piece box made from welded 0.058-inch aluminum

COMPATIBILITY - Compatible with Toyota Tundra 2007-2021

Material - High quality ABS composite material can protect your goods from strong wind, water, dust and sunlight.

SAFETY & DURABILITY - The storage box has a lockable key cover, which can be safely placed on your trunk. It can be sealed well against moisture and bad weather.

Compatible with 2007-2018 Chevy Silverado 1500; 2007-2019 Chevy Silverado2500HD/3500HD; 2019Chevy Silverado1500 LD- Old Model; Compatible with 2007-2018 GMC Sierra 1500; Compatible with 2007-2019 GMC Sierra 2500 HD/3500HD Compatible with 2019 GMC Sierra 1500 Limited- Old Model

ABS Plastic Storage Box can swing out nearly 180° towards you, easy for you to put or pick up the stuff you need, and swing back into a locking position over the wheel well. The SwingCase has a key-lockable lid and can hold up to 75 lbs. of cargo. Includes an organizational tray and a moisture seal, to keep the box organized and dry.

Quick and easy installation, requiring no special tools; Sturdy, durable, and flexible.

FITS: Fits Compatible For Chevrolet Silverado 1500/2500 HD/3500 HD, GMC Sierra 1500/2500 HD/3500 HD 2007-2018 Pickup.

SECURITY: Lock from the top for opening and closing keeping your things safe.

INFORMATION: 75lb Weight Capacity ,Made of ABS Material; Moisture seal keeps contents dry.

Enough to hold up to 75 lbs

moisture-proof seal keeps contents dry

This toolbox swings out nearly 180° towards you for easy access from the tailgate and swings back into a locking position over the wheel well for maximum bed access

Set of Black Driver and Passenger Side Truck Bed Storage Box Compatible with 2017-2020 Ford F250/F350 Super Duty.

Replacement Truck Bed Storage Toolbox, Directly Fit

Swing-out storage container; Bracket Mounted; Single-point Twistlock Lockable Lid

Fits Compatible For Ford F-150 2015-2019

Location: Rear Left and Right (Driver and Passenger Side)

Security: Lock from the top for opening and closing keeping your things safe