Best Extender Truck Beds in 2026

Classic U-Shaped design for maximum cargo capacity

Flip it out with the tailgate open to gain up to 2-feet of enclosed cargo area or flip it inside and close the tailgate to keep tools and smaller cargo contained in the truck bed

Torque-resistant clam-shell design with composite uprights and rounded-rectangle, 6063 T6 aluminum alloy tubes with durable powder coat finish

【Fitment】Can be used on any vehicle with 2" receiver trailer hitch, also can be used on 1-1/4" receivers with a hitch adaptor. The 2-in-1 design allows you to use this bed extender horizontally and vertically, adapt for different loading needs.

【Dimension】Adjustable Height: 12" - 19", Adjustable Width: 29.5" - 49". Capacity: up to 750 lbs.

【High quality】Made from heavy duty steel, solid and strong. Features reflective tape on the front and sides, increase visibility and safety.

【Model Year Fitment】 - Toyota Tacoma 2005 to 2021 and Jeep Gladiator 2020 2021

【Fetured Function 1】 - Flip inside truck bed and work with closed tailgate to secure cargo at rear end and prevent cargo from sliding around.

【Fetured Function 2】 - Open tailgate and flip extender out to extend extra load space.

100% Brand New Load Extender. Expand your vehicle's loading length another 4 FEET with 400 lbs capacity.

Built to strict quality control standards. Fold the extender when not in use for space saving storage.

As long as there's a 2" square hitch receiver, it will be suitable for any short-bed truck, van, SUV, or other vehicle capable of hauling large loads.

More Space: Easily fit the extender into your vehicle's 2" receiver and expand its loading length another 4 feet.

Foldable: Easier to store than a trailer, it also folds up for space saving storage. When collapsed, the anchor points become handles to easily carry. Extender is 46" x 50.2" x 18.1" when installed and 46" x 5" x 7" when collapsed. Two loops on the base bar to securely tie-down your load. Extender has adjustable truck bed height 16"-19".

Installation: Universal installation & Easy installation. As long as there is a 2 "square hitch receiver, it will work for any short bed truck.

Made of aircraft grade aluminum: Weight 18 pounds Red / Black: Rust free curved frame does not drag on uneven terrain.

The new Groovy T-bone features a similar design to the original t-bone but with a few “groovy” changes. Instead of one continuous curve the t-bone now has a sharper curve and then returns straight. This allowed us to put more height adjustment to allow for a wider range of vehicles. The biggest change comes on the 50” cross bar. This aluminum extrusion features a “groove track” that spans the entire width of the bar on 4 sides.

Not just for the Kayak: Load up paddleboards, ladders, plywood, 2x4's and even the Christmas tree. Anytim you need your truck bed to be longer just slide in the Groovy T-Bone Bed Extender into your hitch and you've got it covered.

Weight capacity of up to 750 lbs. included safety flag to attach to the end of your load

The Hitch Extender fit into 2" square hitch receivers but can be used on 1-1/4" receivers with a hitch adaptor.

Length: 53 1/2" from the center of 1/2" hitch pin hole to end of the extension

1.【Fits】▶ Trucks of F150 + F-150 +Titan +Tundra +Silverado/Sierra +Ram 1500/2500/3500

2.【Material】▶ It is composed of black-coated 6063 T6 aluminum alloy tube and weather-resistant modified plastic. It is wear-resistant and does not rust.

3.【Function】▶ Open the tailgate and flip out, you can also flip in

Prevents injury from climbing into or out of the truck bed. All your gear, now easily within reach.

Mounts magnetically to ALL beds/bedliners. Out of the way when not in use, but EASILY ACCESSIBLE when needed.

Only 20" when retracted, allowing for multiple mounting options, but extends up to 5ft! Reverse pole and use magnets to pick up metal objects!

UNIVERSAL FIT | The Lund in Motion Universal BedXTender works on all full-size/mid-size pick-up trucks.

VERSATILE SECURITY | Flip out with tailgate down to extend the secure cargo area of your truck bed by up to 2 feet. Flip in and close the tailgate to contain small items.

FAST CHANGEOVER | Quick disconnect mounting brackets allow you to easily remove the BedXTender from your truck bed.

1.This bed extenders for pickup trucks 2004-2021 Chevy Colorado, 2004-2021 GMC Canyon, 2011-2021 Ford Ranger

2.The body of this bed extender for trucks is assembled by black powder-coated 6063-T6 aluminum alloy tube and weather-resistant PA6 nylon column

3.The tailgate extenders for trucks can be flipped in and out, used to increase the use space and accommodate small items

SPECIFIC FITTED :Fit for Toyota Tundra 2006-2022 /Jeep Gladiator model(Drilling is Required)

IDEAL FOR LOADING OVER SIZE :Extend up to 25 inches for your current bed length

STURDY & DURABLE : This bed extender made from aircraft grade high strength aluminum ,light weight and study

1.It fit Jeep Gladiator(from 2020 to present) and Toyota Tacoma 2 Gen 3 Gen Models(from 2005 to present)

2.Truck bed extender be flipped in and out for use, increase usage space

3.Assembled by black powder-coated 6063-T6 aluminum alloy tube and weather-resistant PA6 nylon column

🚚【STRONGER LOAD-BEARING DESIGN】: Compared with other similar products, our truck hitch extenders do not cut off from the beam, and have a more stable steel structure. At the same time, the left and right retaining posts of our products are thicker and withstands more pressure. At the corner of the beam, we also designed an iron sheet to make this bed extender hitch more stable. Our products are guaranteed to be 100% brand new and high quality.

🚚【PROTECTIVE CUSHION】: Our truck bed extender hitch mount has a cushion for buffering the crossbeam and the two retaining posts. It can better protect the kayak, the building materials transported, from scratches. When bumps happen during driving, the soft cushion will play a good protective role.

🚚【APPLICABLE TO VARIOUS SITUATIONS】: With two transformable forms and a large adjustable distance, our bed extender hitch mount can be applied to various situations on various vehicles. No matter if you need to extend the length of your truck bed or tied the kayaks to the roof. Our truck bed extender will be a good choice for you.

PLEASE BEAWARE that this Extender may not be compatible with Tonneau cover, resulting in no installation space

Compatible for 2007-2018 F-150 & Tundra Deep Bed Truck Large Truck, Strap latch insert MAY NOT FIT

Universal (Full-size trucks, wide beds) Small Truck; Universal (Mid-size and small trucks, small beds)

Truck bed extender adds 36" of length to pickup truck beds for hauling longer loads; can be used as roof rack support if flipped vertically

As extender: 35.75" L x 13.125-20" H; as roof rack support: 11.125" L x 40"-46.875" H; 350 lb weight capacity

Works with 2" Class III/IV hitch receivers

Universal design for Ford Ranger, F-150, Ram 1500, Silverado 1500 series pickup trucks.

Apply drilling template to mark on tailgate posts, only 6 holes drilling required.

Need to drill through drop-in bed liner or spray-in bed liner.

Compatible with 03+Ram1500/2500/3500, 04+F150/250/350/Titan, 07+Silverado/Sierra, 05+Tundra.

This pickup truck features an extendable design that allows for an additional two feet of load capacity when the flip-out option is utilized. Conversely, the flip-in option securely holds tools and smaller cargo in place, ensuring they remain stationary during transportation.

Crafted with a meticulous focus on balance between strength and weight, this product features a 6063-T6 aluminum alloy construction that has been treated with a powder coating for added durability. Its weather-resistant PA6 nylon uprights further enhance its resilience, making it an ideal option for applications that demand a combination of strength and lightweight design.

✅★FITMENT: This bed extender is suitable for Ford F150 and Mark. Please pay attention to compatibility before buying, if you have any questions, please contact us. We will provide the best service.

✅★QUALITY ASSURANCE: We are professional sellers. Our product has passed quality tests before leaving the factory. We promise to provide you with brand new high-quality products and fast transportation services. If you are not satisfied with our products, please contact us, we will provide you with perfect after-sales service until you are satisfied, so please rest assured to buy.

✅★HIGH QUALITY MATERIAL: Made of high-quality ABS and iron materials, with high strength, strong and durable.

2-in-1 Design: Truck Bed Extender can expand your vehicle's loading length another 6 FEET. Rated for 800lbs of distributed weight.As long as there's a 2" square hitch receiver, it will be suitable for any short-bed truck, van, SUV, or other vehicle capable of hauling large loads.

Adjustability & Durable: Adjustable Width: 27.56" - 45.28", Adjustable Height: 18.13" - 27.17",This hitch extender is a good helper for a long-distance loading. Adjustable length and width for different applications like moving ladders, racks, canoes, kayaks, long pipes, lumber.

High Quality Material: For maximum stability and durability, We use high-quality Alloy Steel material for standardized production. Features two welded loops on the cross bar (one on each side).

Easy Installation.

High-strength black-coated finish.

Extends bed up to 26".

HIGH LOADING CAPACITY- Extend your truck bed to haul even more, and longer payloads such as pipes or a boat the extender can hold up to 750 lbs.

ADJUSTABLE - The smart 2-in-1 design allows you to use this bed extender horizontally and vertically to fit all kinds of trucks and loads. Adjusts height (9.7'' to 16.7'') and width (29.7''- 49.2'') to ensure a perfect fit.

UNIVERSAL FIT- The truck bed extender is designed to fit any truck with a 2" hitch receiver and can also be used on a 1.25" hitch using a hitch adapter.

Flip it inside with tailgate closed to keep smaller cargo and groceries from sliding around

Flip it out on open tailgate to extend 22 inch bed usable length

Useful U shape design, Torque-resistant clam-shell

Crossbar width: 60"

Material: Aircraft-grade aluminum (won't rust)

Extends to add 48" to the end of your truck bed

Perfect Fitment: This truck bed extender is 56.7"x26"x18.5" in size. Perfect for Ford F150 04+ F-150 07+ Titan 06+ Tundra 07+ Silver-ado/Sierra 03+ Ram 1500/2500/3500.

Selective Material: Aluminum Alloy tubes selected by our sports bed extender is high strength with a black coated finish to avoid rust and corrosion.

Exquisite Design: Classic U-shape design extends your truck bed up to 26 inches to provide the largest space for securing cargo and gear. On the other hand, the tailgate extender can fix your items better when the tailgate is up.

[Vehicle Fitment]: Compatible with Toyota Tacoma 2005-2022 Extended Cab Pickup ✔ Tacoma 2005-2022 Crew Cab Pickup ✔ Tacoma 2005-2014 Standard Cab Pickup ✔

[Reference Number]: PT392-35120, PT392-35000

[Position]: Rear Side

The extender adjustable width: from 27.56" to 45.28", Adjustable Height: from 18.13" to 27.17". Fit 2" hitch receiver. Rated for 750lbs of distributed weight.

This hitch extender is a good helper for a long-distance loading. Help you complete a lot of transportation work. Adjustable length and width for different applications like moving ladders, racks, canoes, kayaks, long pipes, lumber.

Manufactured using impact-resistant and durable steel. Good resistance and durability.