Best 2021 Tv Wall & Ceiling Mounts in 2026

SPACE SAVER – Improve your overall TV viewing experience while enjoying a less cluttered living area. The PDX680 Full Motion Television Mount lets you gain a sizeable amount of floor space that would otherwise be taken up by a TV stand or media cabinet. Mounting your TV on the wall is especially beneficial when living in a small apartment, condo, or tiny home.

BETTER VIEWING EXPERIENCE – Featuring two wishbone arms for maximum stability, this articulating TV mount can extend a remarkable 24” from the wall, giving you the freedom to pan and swivel your TV to accommodate a variety of viewing positions. Swivel it up to 85° left and right, depending on screen size, and tilt it 15° forward to further improve line-of-sight. If glare is an issue, the PDX680 can also tilt 3° backward in order to avoid light sources.

EASY INSTALLATION – Along with a step-by-step instructional video to help you through your installation, the PDX680 comes with a conveniently labeled bolt box with all the necessary hardware for wood stud and concrete walls. Its 27", dual stud wall plate accommodates both 16" and 24" stud spacing, and features multiple lag bolt slots to ensure your TV is properly positioned. A precision drill template is also provided to accurately position your mount and to catch shavings while drilling.

Space saver. Save space in your living room or office with the PDX650 Full-motion TV wall mount. Instead of putting your television on the table, hang it from the wall! This Solid steel mount can be installed on both wood and concrete walls, and also has a sleek, integrated cable-management system to keep your viewing area clean and organized.

Easy to install. Kanto provides an online step-by-step instructional video to help you install your new wall mount. A detailed manual is included in the package, as well as a cardboard template to help you mark and drill holes. This not only aids in the installation, It catches the drill shavings! All the hardware comes in a box with labeled slots for convenient organizing. The 22" Dual stud wall plate accommodates up to 16" Studs. For 24" Studs, Please use the Kanto Pdx680.

Convenient TV viewing. This adjustable mount swivels up to 80° left and right, and tilts from 15° to –3° for maximum viewing range. The mounts low-profile design enables it to sit just 2 inches from the wall, but can be extended out up to 21. 8 inches. You don't need to move your chair closer to the screen anymore!

HORIZONTAL OFFSET – All PMX mounts feature a segmented design that allows the arm assembly to be easily removed and positioned, independent of the wall plate. This setup makes it easier to center your television, regardless of the location of the studs.

EASY INSTALLATION – Installing a PMX TV mount is quick and easy. Weighing less than 10 pounds, the wall plate can be installed unassisted. The arm assembly can then be hooked into place before securing it with the provided hardware.

TOOLLESS TILT – The PMX series features a specially designed tilt mechanism that allows for precise adjustments to be made without the need of tools. Set the tension to allow for finger-tip adjustments, or lock it in place at the desired angle.

EXTRA WIDE WALL PLATE - Accommodates 16" and 24" stud spacing

POST-INSTALLATION LEVELING - Use the provided 6" extension bit to access the leveling screws after your TV has been mounted

LOCKABLE ARMS - Torx screws can be tightened using the provided key to prevent your TV from being removed

Fits most flat panel TVs from 37" to 75", supports TVs up to 125 lb (57 kg), accommodates VESA sizes from 200x100 to 600x400

Sits 2” (5 cm) from the wall, extends up to 21.8” (55.3 cm) from the wall, integrated cable management system

Accessible tilt mechanism provides a +15 Degree to -3 Degree tilt angle, 80 Degree of swivel in either direction, dependent on screen size

Fits most flat panel TVs from 39" to 80", Supports TVs up to 125 lb. (57 kg), Accommodates VESA sizes from 200x100 to 700x400

Extends up to 24” (61.3 cm) from the wall, sits 2.5” (6.3 cm) when fully retracted and accommodates 24" stud spacing

Accessible tilt mechanism provides +12 Degree to -3 Degree of tilt, 90 Degree of swivel in either direction, depending on screen size.

FULL MOTION FUNCTIONALITY - The M300 full motion tv wall mount offers a wide range of functionality to maximize your television's capabilities and accommodate your life at home. Its articulating arm allows you to extend your TV 19.6" from the wall, swivel it up to 135 degrees left or right (depending on screen size), and tilt it 10 degrees forward to 2 degrees backward to achieve an optimal viewing angle. The tilt mechanism is easily accessible and uses a spring-loaded lever system that requires zero tools.

EASY SETUP - Along with mounting hardware for wood stud and concrete walls, the M300 includes a wide selection of bolt and spacer sizes to ensure a proper fit with your TV. An easy-to-follow video is provided to guide you through every step of your installation, while a paper drill template helps to accurately mark your pilot holes. The M300's narrow wall plate also makes it easy to mount your TV to a pillar or close to a corner. NOTE: When pushed back against the wall, your TV will sit 5" to the left or right of the mounting bracket.

HEAVY-DUTY CONSTRUCTION - Featuring solid steel construction, this heavy-duty articulating TV wall mount can safely support up to 80 pounds, even at full extension. Mount your 26 to 55 inch TV with confidence while enjoying all the flexibility the M300 has to offer.

SECURE CORNER MOUNTING - Featuring two independent wall plates, the PDC650 allows for TVs weighing up to 125 pounds to be safely mounted to any corner, column or pillar.

PAN AND SWIVEL - Swivel the articulating arms up to 40° in either direction to ensure your TV is properly positioned. Note that the range of movement will depend on the size of your TV and the location of the wall plates.

ANGLED VIEWING - In order to improve line-of-sight with your TV and reduce glare, the VESA compliant TV brackets can be tilted 15° forward and 3° backward.

IMPROVED VIEWING - Extending 27.6” from the wall, the articulating arm gives you the freedom to pan, swivel and tilt your TV exactly where you want it.

SECURED TV STAND. This mobile stand lets you move your flat-screen monitor around your home or office with ease. It features four quick-release wheel locks that roll smoothly for effortless mobility. Each 2-inch wheel has a locking mechanism that you release by stepping on a lever. This ensures that the stand remains stable once the television set is where you want it.

HIGHLY ADJUSTABLE. The mounting brackets fit most television panels from 37 to 65 inches. The stand’s height can be adjusted with two buttons on the center columns, letting you position your television at any height from 40.5 to 60 inches, for optimal viewing. What’s more, it has an adjustable middle tray for your laptop, mobile device, or other gadgets. Product weight: 47.3 Pounds

EXCELLENT DURABILITY. Kanto’s mobile TV stand is made of high-quality durable steel with a powder-coated finish. It can safely support televisions of up to 100 pounds. This is ideal for presentation rooms in schools, offices, and even your home. Supports VESA 75×75 – 600×400.Height Adjustment: Between 40 inches and 60 inches. Four wheel locks can be applied and released with your foot

ENHANCED TV VIEWING EXPERIENCE – The FMX3 is the ultimate TV mounting solution. This full motion mount will improve your television experience by letting you extend, swivel, and tilt your flat-screen TV to any desired angle. It extends 28 inches from the wall, tilts +15°/-5°, and swivels up to 80 degrees left and right, depending on screen size. It also features adjustable horizontal leveling to ensure your TV is perfectly positioned.

STAY ORGANIZED AND SAVE SPACE – Increase floor space and improve the appearance of any room or office by mounting your TV with the FMX3! Removable cable management clips hook easily onto the extension arms and can be positioned to route your cables neatly back to the wall. Keep your cables tidy and out of sight for a clean, organized look.

SUPERIOR CONSTRUCTION – The FMX3’s solid steel construction and heavy-duty lag bolts are designed to support up to 150 pounds and accommodates VESA sizes from 200x100 to 700x500. Its long-lasting, powder-coated finish also looks great against any wall or surface.

Fits most flat panel TVs from 32" to 90", supports TVs up to 150 lb. (68 kg), accommodates VESA sizes from 100x100 to 600x400

Sits 1.4” (3.5 cm) from the wall, accessible tilt mechanism provides a +12 Degree tilt angle

26.9” (68.4 cm) wall plate accommodates up to 24” stud spacing, solid steel construction with durable powder coated finish

12° OF TILT - Tilt your TV up to 12° forward to reduce glare and improve line-of-sight with the screen

LOW PROFILE DESIGN - Measuring 1.4” thick, the PT400 allows your TV to sit remarkably close to the wall

EXTRA WIDE WALL PLATE - The 35″ wide wall plate can be installed across three studs with 16″ spacing, or two studs with 24″ spacing

The R300 in-wall design is made to fit securely between 16" stud centers. When fully retracted, its arm assembly allows your TV to sit almost flush with the wall.

Constructed out of solid steel, the R300 safely Supports 32” to 55” TVs weighing up to 80 pounds, while its adjustable mounting brackets accommodate VESA sizes between 100x100 and 400x400.

Use the R300 Articulating arm to ensure you always have the perfect viewing angle. Extend it out 18.5” to provide ample room to tilt and swivel your TV.

Ultra-low profile – achieve a minimalist Home theater setup without sacrificing the functionality of a full motion TV mount. The r500’s recessed in-wall design is made to fit securely between 16-inch stud centers. When fully pushed back, Its Articulating arm assembly allows your flat screen TV to sit almost flush with the wall.

Better viewing experience – use the r500’s Articulating arm to ensure you always have the perfect viewing angle. Extend it out 27. 6. 5 inches and swivel to 90° in either direction, depending on screen size. An accessible tilt mechanism Also allows you to angle your TV 10° forward to further improve line-of-sight, or 5° backwards to reduce glare.

Safe & secure – mount your TV with confidence. Constructed out of solid steel, the R500 recessed wall mount safely supports 46 to 80-inch flat panel TVs weighing up to 135 pounds. Its adjustable mounting brackets accommodate VESA sizes from 100x100 to 600x400 to ensure a perfect fit with your television.

Fits 30-inch to 60-inch TVs

Extension: 26 inch (66 cm) from the wall

Sliding TV pivot point for left or right hand installations

Fits 37" to 60" (94 to 152 cm) flat panel TVs

Fits VESA sizes from 100 x 100 to 600 x 400

Low profile design sits less than 2" from wall and provides +10/-5Degree tilt, with locking screw

Fits 60" to 90" (152 to 229 cm) flat panel TVs

Fits VESA sizes from 400 x 400 to 1100 x 600

Low profile design sits less than 2" from wall and provides +10/-5Degree tilt, with locking screw

CORROSION RESISTANT STAINLESS STEEL – With a telescoping stainless steel pole, and all surfaces protected by galvanized and UV-resistant finishes, CM600SG resists corrosion when left in even the harshest of environments.

SAFE & SECURE – Fixed tilt increments and specialized Security Torx TV screws prevent tampering and unwanted adjustments keeping your investment safe.

FLEXIBLE INSTALLATION OPTIONS – A pivoting mounting plate allows CM600SG to secure into to a flat ceiling, angled ceiling, or even a wall expanding the possibilities of where a TV can be hung.

HASSLE-FREE INSTALLATION - To make mounting your TV as easy as possible, the CM600's ceiling mounting bracket comes detached from the rest of the mount, allowing it to be installed independently to any wood stud or concrete ceiling. Simply slide the telescoping extension pole into place to complete the installation.

ANGLED CEILINGS - To accommodate sloped ceilings and support beams, swing the extension pole up to 90 degrees and lock it in place at the preferred angle. This also allows the CM600 to be installed on a wall, if needed.

ADJUSTABLE HEIGHT - Ensure your 37 to 70 inch TV is hanging at an ideal height by extending the telescoping pole from 42.7 to 66.3 inches. Adjustments can be made in 2-inch increments.

Fits most flat panel TVs from 19-Inch to 32-Inch

Load rated to 56lbs

Extends up to 17-Inch from the wall

ENHANCED TV VIEWING EXPERIENCE – The FMX3 full motion wall mount helps to improve your viewing experience by letting you extend, swivel, and tilt your TV to accommodate your seating position. Pull your screen 28" from the wall, tilt it +15°/-5°, and swivel it 45° to 88° left or right, depending on screen size. Adjustable horizontal leveling is also provided to ensure your TV is perfectly positioned.

STAY ORGANIZED AND SAVE SPACE – Increase floor space and improve the appearance of any room or office by mounting your TV with the FMX3. Removable cable management clips hook easily onto the extension arms and can be positioned to route your cables neatly back to the wall. Keep your cables tidy and out of sight for a clean, organized look.

SUPERIOR CONSTRUCTION – The FMX3’s solid steel construction and heavy-duty lag bolts are designed to support up to 150 pounds, making it perfectly suited for TVs as large as 90 inches. Its long-lasting, powder-coated finish also looks great against any wall or surface.

EXCELLENT TV VIEWING EXPERIENCE – Enjoy hours of watching your favorite series and movies on your flat screen television with the KT3260 Tilting TV Wall Mount! It sits 1.5” from the wall and has an accessible tilt mechanism that allows you to angle your screen up to 12°. This improves your line of sight and helps reduce glare for an overall better viewing experience.

ENSURES SAFETY – Mounting your TV with the KT3260 wall mount eliminates the risk of it being tipped over, which may also cause unexpected injuries. This mount is made from high quality materials, boasting solid steel construction and the ability to support TVs weighing up to 80 lb (36 kg). You can rest assured that your TV is secure and stable when it is mounted on a wall at home.

FITS MOST FLAT PANEL TELEVISIONS – The KT3260 TV mount fits most flat panel TVs measuring between 32” to 60”. Its mounting brackets accommodate a wide range of VESA sizes from 100x100 to 600x400, ensuring you can upgrade your TV without having to purchase a new mount.

SAFE & SECURE - Supports TVs weighing up to 88 lb, with VESA sizes up to 400x400

WIDE RANGE OF SWIVEL - Swivel your TV up to 90° in either direction, depending on screen size

EASY TILT - Tilts +12°/-2° to reduce glare and improve line-of-sight with your TV

EASY INSTALLATION - Capable of supporting up to 100 lb., the LX600SW can be securely mounted to steel studs up to 16” apart.

IMPROVED VIEWING - Heavy-duty articulating arms allow you to swivel your TV 45° in either direction and tilt it -3° to +15° to achieve the best viewing angle.

LOW-PROFILE DESIGN - The low-profile design of the LX600SW allows your TV to sit 2.2” from the wall when fully retracted.

NO DRILL NEEDED - Fabric straps wrap around columns or pillars between 10” and 48” in diameter for a secure attachment without the need to drill.

HIDDEN CABLES - An included white cable sleeve and matching cable ties blend in with the white fabric strap to give you a seamless look while routing cables to the back of your column.

NON-MARKING INSTALLATION - Silicone padding on the leading edge of the column plate, and a ratcheting system that is integrated into the mount prevent direct metal contact lessening the chance of scratching or marking the column.

ANTI-TAMPER TV ARMS AND SCREWS – The screws have a specialized head that only the included tool will be able to tighten and loosen. Feel confident that your TV will be safe and secure.

SECURE TILT MECHANISM – There are three discreet tilt positions, 0, +6, and +12 degrees, and an anti-tamper mechanism that makes it difficult for the public to alter your TV's tilt settings without the included tool.

ENHANCED TV VIEWING – Get the best possible viewing angle. Full-motion maneuverability makes it a breeze to extend, swivel, and tilt TVs that are up to 65 inches.

FULL MOTION FUNCTIONALITY – The M300W Full Motion Television Wall Mount offers a wide range of functionality to maximize your television's capabilities and accommodate your life at home. Its articulating arm allows you to extend your TV 19.6" from the wall, swivel it up to 135° left or right (depending on screen size), and tilt it +10° to -2° to achieve an optimal viewing angle. The tilt mechanism is easily accessible and uses a spring-loaded lever system that requires zero tools.

EASY SETUP – Along with mounting hardware for wood stud and concrete walls, the M300W includes a wide selection of bolt and spacer sizes to ensure a proper fit with your TV. A step-by-step video is provided to guide you through your installation, while a drill template helps to accurately mark your pilot holes. The M300's narrow wall plate also makes it easy to mount your TV to a pillar or close to a corner. NOTE: Your TV will sit 5" to the left or right of the wall plate when fully pushed back.

HEAVY-DUTY CONSTRUCTION – Featuring solid steel construction, this heavy-duty articulating television mount can safely support up to 80 pounds, even at full extension. Mount your 26 to 55-inch flat screen TV with confidence while enjoying all the flexibility the M300W has to offer.