Best Cutting Twist Drill Bits in 2026

HSS Titanium Coating - Classic HSS construction with titanium coating for capability and durability. The cutting edge is hardened and honed for sharpness, chatter-free design with staggered cutting teeth ensure the precise countersinking and hole smooth clean.

Flutes Form - 2 flutes form helps clear chips and debris away from the bit, decreasing friction and heat for a faster, cooler drilling process.

Quick Change - 1/4 inch hex shank fits into all power tools more easily and securely, specially for locking into quick change chuck.

Constructed from carbon steel with heat treated for durability, the head with polished surface for longevity.

Cutting edge with double-side cutting spurs of high quality for durable and quick drilling effortlessly.

Quick-Change Hex Shank, with groove for reducing slipping and preventing falling off, safety.

JOBBER LENGTH: 1/4-inch cutting diameter, 2-3/4-inch flute length, 4-inch overall length, 135 degree split point, 3-flat shank

MADE FROM HIGH-SPEED STEEL AND 5% COBALT: improve much higher heat resistance because of cobalt steel's high red hardness, provide strong durable performance compared to typical hss drill bits

CAN BE REPEATEDLY SHARPENED AS NEEDED: cobalt drill bit's hardness is uniform throughout the entire material, so that can be repeatedly sharpened without damaging the cutting edge allowing it to drill more than hss drill bits

This product is easy to use.

This product is highly durable

This product is manufactured in China.

115 PIECES INCLUDED: 29pcs Fractional Size:1/16” to 1/2” in 1/64th increments; 26pcs Letter Size: A To Z; 60pcs Numbered Size: #1 To #60.

HSS WITH 5% COBALT: Durable, Higher Heat & Abrasion Resistance.

PRECISE 135° SPLIT POINT & TWIST DESIGN: Prevent walking, clear chips and particles faster.

Premium Material: Manufactured from high speed steel for strength and durability

Storage: Supplied in a plastic storage box for easy storage and transportation

Widely Used: The 135° fast cutting point is automatically centered and penetrates quickly with less pressure,The drill kit meets all your requirements, including all common size specifications for Wood/Cast Iron/Aluminum Alloy/Plastic/Fiberglass

COBALT STEEL - Manufactured from M35 cobalt steel, with molybdenum and cobalt added to creates a hardened alloy, measuring Rockwell hardness up to 67, extremely heat resistant; for much faster cutting and extra longer life span, with up to twelve times when compared with an average HSS drill bit.

NO CENTER PUNCH NEEDED - The 135° Quick-Cut points are self-centering and penetrate quickly with less pressure. Will not "walk" or "wander". Straight shank allows for firmly holding and accurate centering, fit for standard drill chucks and regular round collet chucks. Must be used and operated at proper RPMs for maximum efficiency

13PC METRIC BITS - The set includes 13pcs of M35 cobalt steel twist drill bits: 1.5mm, 2mm, 2.5mm, 3mm, 3.2mm, 3.5mm, 4mm, 4.5mm, 4.8mm, 5mm, 5.5mm, 6mm, 6.5mm. Well organized in a plastic indexed storage case for easy transport to your worksite.

Designed for maximum speed and life

Pilot point and split tip design

No bit walking - more user control

Chrome-vanadium steel lasts longer between sharpening

Less tear-out in hardwood, softwood and laminated materials

Optimized outer spurs insure fast and easy cutting of the wood, scoring the outer rim of the hole before the main part of the drill begins to do its work

Premium M42 8% Cobalt Steel ,68-70 HRC (Rockwell Hardness Scale) ,Usually Give the Best Heat,Wear and Chip Resistance and Long Tool Life.

3 Steps Desigh for Cutting through Stainless Steel,Hard Metals,Aluminum,Plastic.

This Cobalt Drill Bit is Typically Capable of Running Three to Five Times Faster.Despite the Higher Price,the Cost Per Hole When Using Cobalt Drill Bit Will be the Lowest,Since It Can Produce So Many More Holes.

diameter 6mm 1/4 Inch,diamond length 8mm,Round shank

Multi-purpose drilling for granite & marble, masonry, concrete, tile/ceramic, glass, hard plastic,All-Purpose Drilling

Wax inside for cooling,our Diamond Tipped Drill Bits have wax cores built-in for Cooling and Lubrication.Special Designed with Hole and Groove in the Side of Drill Bit for Removing Stone Chips

【M35 Cobalt High Speed Steel】Industry grade M35 high speed steel drill bit set, much harder than HSS used in other similar drill bits set. These drill bits contain 5% Cobalt, which increases wear-resistance and durability.

【Most Commonly-Used 20 Sizes】A complete combo set of 31 jobber length industrial drill bits for metal drilling (1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 11/64", 3/16", 13/64",7/32",15/64",1/4", 17/64", 9/32", 5/16", 11/32", 3/8", 7/16", 1/2") . They fit the majority of power drill currently on the market and comes with a portable plastic case for easy storage and organization.

【Precise & Efficient Drilling Performance】✔ Fully Ground spiral groove design clears particles quickly, decreases friction and heat for a faster and cooler drilling performance. ✔ 135° Split Point with round straight shank prevents walking and makes drilling precise and faster. No center punch is needed.

FEATURES: 5pcs step drill bits enable 50 sizes - each step drill bit can drill several bore diameters. It's can work as 50pcs twist drill bits. You don't have to replace drill bit constantly for different bore sizes.

TITANIUM HIGH-SPEED STEEL: classic and sturdy high-speed steel with titanium coating for proven capability and durability in drilling holes in plastic, aluminum, copper, stainless steel and many other types of the metal sheet.

DOUBLE CUTTING BLADES & THREE-SIDED SHANK - Double cutting blades and X-type openings design ensure a faster and smoother cutting; 3-sided shank design prevents slip in drill chuck can cut through the wood, sheet metal, steel, and other surfaces.

Cobalt drill bits: Classic 5% Cobalt M35 High Speed Steel construction with Titanium Coating for proven capability and durability.

Hardness: 5% Cobalt drill bits’ Rock wall Hardness Level HRC 65-66.

Package & Size: 10 Pieces drill bits in a plastic bag, Diameter 9/64 inch, Total length 2-7/8 inch, Working length 1-3/4 inch.

Specification - 10Pcs 4mm cobalt drill bits, each kit contains a total of ten drill bits in the same size, Blade length: 43mm/1.7inch, 118 degree point, straight shank.

Material - HSS Cobalt high speed steel for super abrasive resistance in tough metals, improve much higher heat resistance because of cobalt steel's high red hardness.

Durable - HSS Cobalt Drill Bit provide strong durable performance compared to typical hss drill bits.

Drill, Tap and Ratchet Tap Wrench Set Includes: 9 drill bits include wire gauge sizes #36, #29, #25, #21, #7, letter sizes F, U and inch sizes 5/16", 27/64". 9 hand taps include 6-32 UNC, 8-32 UNC, 10-24 UNC, 10-32 UNF, 1/4"-20 UNC, 5/16"-18 UNC, 3/8"-16 UNC, 7/16"-14 UNC, and 1/2"-13 UNC. 1 ratchet tap wrench fits 0-1/4" tap. The set has a strong and professional box with indexed holder and standing up tiers for easy storage and pickup.

Wide Applications: The tap and tap wrench are designed to make shallow cuts in narrow spaces. The drill and tap combo are tailored for industrial production, maintenance or portable drilling jobs in metal, aluminum, and plastics. And they fit majority drill driver brands on the market. Taps in this set can be driven by both hand and machine.

Drill Bits, SAE Taps and Gear Tap Wrench Cost-Efficient Combination: provides a secure method of drilling the proper hole size before cutting right-hand internal threads. The T-handle silver wrench allows three settings-forward, reverse and lock positions which can be set with your hand efficiently. Purchasing all three tools in one combo offers convenience and cost efficiency. It is much cheaper than buying them separately.

【M35 COBALT HIGH SPEED STEEL】1/8" drill bits for metal made from M35 Cobalt High Speed Steel and contain 5% Cobalt, which increases wear-resistance, durability and extra longer life span, so that the drill bits last through multiple uses

【135° SPLIT POINT】135°quick-cut pilot split points are self-centering and can penetrate quickly with less pressure. Straight shank of this cobalt steel drill bit allows for firmly holding and accurate centering and makes drilling precise and faster

【FULLY GROUND PROCESS】Fully ground spiral groove design clears particles quickly, decreases friction and heat for faster drilling performance

Bright finish: Classic M2 High Speed Steel construction with Bright Finish for proven capability and durability.

Strength & Hardness: Made with HSS M2 steel, Rock wall Hardness Level HRC 62-63.

Package & Size: 12 Pieces in a plastic bag, Diameter 3/16 inch, Total length 3-1/2 inch, Working length 2-5/16 inch.

Bright finish: Classic M2 High Speed Steel construction with Bright Finish for proven capability and durability.

Strength & Hardness: Made with HSS M2 steel, Rock wall Hardness Level HRC 62-63.

Package & Size: 12 Pieces in a plastic bag, Diameter 5/16 inch, Total length 4 inch, Working length 2-3/4 inch.

1.Cutting edge is made of Top-class HSS (High Speed Steel).

2.Through special heat treatment, the cutting edge is sharp with high intensity.

3.Good cutting effect of ferrous and non-ferrous metals, be able to process stainless steel plates below 3mm

TWIST DRILL-BIT SET: Each steel drill bit features an angled tip, a twist style, and a 135-degree split point for precise self-centering. Designed to increase cutting speed, these drill bits prevent walking to quickly clear chips and particles.

QUALITY TITANIUM BITS: These drill bits are constructed of high-speed steel with a titanium nitride coating, providing a high surface hardness to help penetrate tough materials. The steel also reduces friction between the bit and the workpiece.

VERSATILE LEFT-HAND PIECES: The special left-hand design is ideal for use with reversible drills with screw extractors to remove broken fasteners, screws, bolts, and studs during home repairs, automotive garage projects, professional work, and more.

Premium cobalt high speed steel construction for proven capability and durability to drill holes in wood, plastic, aluminum, copper, stainless, sheet metals and many other types of materials

Superior gold titanium and black nitride dual coating finish holds up lubricant better for smoother drilling, and is 80% more durable and corrosion resistant than regular black enamel finish

135° Split point design at tip increases cutting speed with self-centering feature and prevents drill walking or wobbling

High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance

Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge

Round shanks allow use with a wide variety of toolholding systems

Premium Quality Set of Total 20 pcs. 1mm (5 pcs), 1.5mm (5 pcs), 2.0mm (5 pcs), and 2.5mm (5 pcs) Twist Diamond Drill Bits - Compatible with Dremel and Other Rotary Tools

Perfect for Jewelry Design Necklaces Earrings, Pendants, Bracelets with Sea Shells, Beach Glass, Rocks

BONUS INCLUDED 4 Different Sized Collets Compatible with DREMEL for Drilling Clean Holes in Fused Glass, Gemstones, Rocks, Ceramic, Porcelain, Gemstones

COBALT STEEL - Manufactured from M35 grade cobalt steel, with molybdenum and cobalt added to creates a hardened alloy, measuring Rockwell hardness up to 67, for much faster cutting and extra longer life span, with up to twelve times when compared with an average HSS drill bit.

SELF CENTERING - the 135°quick-cut splint point is self-centering and will penetrate quickly with less pressure. Will not "walk" or "wander"

FOR STAINLESS STEEL - Particularly successful in cutting through hard metals such as stainless steel and cast iron, although they can be used for softer materials, too. Not for hardened steel / high carbon steel. Try to adjust the RPM when it fails to penetrate.

🔨【Various Sizes】 13 sets of drill bits include 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 11/64", 3/16", 13/64", 7/32", 15/64", 1/4", can meet more needs.

🔨【M35 Cobalt Drill Bit】 The M35 cobalt drill bit is a durable, sharp and robust drill bit suitable for cutting stainless steel, iron castings, copper, aluminum and other soft metals as well as plastics, wood etc. Note that it is not applicable to quenched bolts.

🔨【Quick and Efficient】 The cobalt drill bit set can be used effectively on most soft and hard objects, with a 135 degree point tip and twist design for faster cutting, self-centering to prevent walk-off and faster chip and particle removal.

HIGH QUALITY MATERIAL: 5% Cobalt High Speed Steel M35 provide extended tool life compared to ordinary drill bits.Durable, Higher Heat & Abrasion Resistance.

PRECISE 135°SPLIT POINT & TWIST DESIGN: Prevent walking, clear chips and particles faster.

PROFESSIONAL & WIDELY USE: M35 Cobalt HSS is more suitable for hardened material. Particularly successful in cutting through hard metals such as stainless steel, cast iron, high temperature alloy, titanium alloy, hard plastics and woods, and also can be used for softer materials.

COBALT STEEL - Manufactured from M35 grade cobalt steel, with molybdenum and cobalt added to creates a hardened alloy, measuring Rockwell hardness up to 67, for much faster cutting and extra longer life span, ideal for repeated drilling in metalworking.

FOR METALWORKING - Particularly successful in cutting through hard metals(hardness less than HRC38°) such as stainless steel and cast iron, although they can be used for softer materials like copper and aluminium, too. Not for hardened steel / high carbon steel. Try to adjust the RPM when it fails to penetrate.

SELF CENTERING - The 135°quick-cut pilot split points are self-centering and can penetrate quickly with less pressure. The bits will not "walk" or "wander". Straight shank allows for firmly holding and accurate centering, fit for standard drill chucks and regular round collet chucks.

Made from cobalt(5%) High Speed Steel , increases the wear and heat resistance of drill bit, the life span of drill bit is prolonged.

Fully Grinding Processing makes the surface of drill bit smoother, the friction can be reduced and the cutting speed is faster.

135° Split Point Design improves cutting speed while easy self-centering, prevent walking and skating across the workpiece surface

Features: Cutting Edge Diameter : 12.5mm / 0.49"; Shank Diameter : 12.5mm / 0.49"; Cutting Edge Length: 102mm / 4.02"; Total Length : 150mm / 5.91"; Cutting Direction: Right Hand

High Speed Steel Tool: High-speed steel straight shank tool is good for most general purpose applications, offering a combination of hardness and toughness for wear resistance

Sharp Spiral Flutes: Provide neat and smooth cuts. High cutting edge strength, fast cutting speed. Spiral groove facilitates the export of metal chip, saving time and effort in operation.