Best 2 Weld On Hinges in 2026

MATERIAL: Our barrel gate hinge is made of high quality standard steel AISI 1045, rather than made of weak iron steel or powder steel. These hinges are covered black electrostatic powder coating, rust and corrosion resistant, precise processed by machine, sturdy and durable

SIZE: Total length is 7 inches, barrel diameter is 1-3/8 inches and pin diameter is 3/4 inches, mounting plate gap is 1-1/2 inches

LOAD CAPACITY: Each gate hinge loads up to 2200lbs, 1 Pair total load capacity 4400lbs, preventing the gate from sagging

as L.A. Ornamental Store Hinge pivots on a steel ball bearing and includes a grease fitting to keep the bearing lubricated. Steel 3/4" J-Bolt Adjustable Barrel hinges provide full range of swing for gates and doors. The total length of each hinge is 7", with the threaded arm measuring 5.75".

This hinge will swing a full Circle if installed without a stop. Steel 3/4" J-Bolt Adjustable Barrel hinges provide full range of swing for gates and doors. The total length of each hinge is 7", with the threaded arm measuring 5.75".

Hinge is made up of a mounting plate which welds to Steel Post (not included) These heavy duty hinges are just what you need to hang doors and gates where you require full range of motion. Made of high quality steel with a black powder coating.

1.Heavy Duty Design: Made of durable thick cold roll steel, this heavy duty gate hinges can hold up to 450 lbs capacity.

2.Smooth Rotation: The gate hinge features grease fitting and an internal ball bearing, making for a smooth and squeak-free operation.

3.Easy To Install: Welding required for installation, had better remove the black powder coating on the mounting plate before welding.

Weldable Solid Steel Heavy Duty Butt Hinges 5" x 5" - 2 1/8" Leaf with a tight 3/8" pin

Extra Heavy Duty - Non-Swaged Surface - Narrow Width

Each hinge weighs 3.5 lbs.

Length: 3"

Diameter: 3/4"

Weight: 5.9 oz

Material - Heavy duty weldable barrel hinges crafted from carbon steel Q235B with an unfinished surface treatment.

Size - 2” (50.8 mm) length, 3/4” (19.05 mm) width, 7/16” (12 mm) diameter of pin, 500lbs load capacity.

Silent and Smooth - Pin bearing (diameter: 7 mm), pre greased providing a smooth 360-degree low friction rotation.

Material - Heavy duty weldable barrel hinges crafted from carbon steel Q235B with an unfinished surface treatment.

Size - 3” (75 mm) length, 3/4” (20 mm) width, 1/2” (12.7 mm) diameter of pin, 500lbs load capacity.

Silent and Smooth - Pin bearing (diameter: 7 mm), pre greased providing a smooth 360-degree low friction rotation.

4 Pcs Weld-on door hinges

carbon steel Q235B, unfinished.

Size: 5 x 2-3/8 inch (L x W) / 125 x 60 mm

High Quality Bright Steel

Weldable Butt Hinges for Medium Duty Projects

2 1/4" x 3 1/2" x .086"

900 lbs capacity per pair

Features grease zerk fitting to keep the internal ball bearings lubricated

Total Hinge Measures: 6-7/8" x 1-3/4"

It is very suitable for freight trucks, dump trailers, horse trailers and other doors.

5-3/8" overall length. 4" overall width. 2-1/4" plate width. 1/4" thickness.

Made of heavy steel, durable and corrosion resistant. Suitable for outdoor use.

What You Will Get: you will receive 2 pieces of weldable hinges, the size of them is about 3 x 3 inches, and the thickness is about 12 Ga, the weight is about 0.34 lb, besides, each hinge can bear about 25 lb of weight, you can choose them according to your needs

Strong and Reliable: this weldable metal hinge is made of steel, strong and reliable, and it is with nice bearing capacity, suitable for heavy gates and doors, it is not easy to break, you can use the hinge for a long time

Easy to Install: these heavy duty gate hinges do not need to be fixed with screws or other fasteners, only need to be welded at the place you want; These heavy duty gate hinges are dark gray and don't have coating, they can be painted to match the metal surface to which they are attached

Material: Steel

5-1/2" length

3/4" thickness

Pack Size: 4 Pack, Material: Heavy Duty Steel

Mount Type: Weld on, Style: Short Leaf Strap Style

Overall Length: 5-3/8" , Overall Width: 4 Inch

MATERIAL - 2 hinge pack of 100% stainless steel lift off Hinge 3 inch 75 mm Length x 50mm Width, Left side, SS pin is slightly Grind on top, so that your door fitting of hinge become Effortless.

DIMENSIONS - Thickness of hinge flap is 1.65mm approx & outer pin size 7.5mm approx.

ARCHITECTURAL QUALITY- Each hinge is Machined for precise installation and smooth movement.

Metals 4" Heavy Duty Weldable Hinges, made of good quality steel, durable, sturdy, and long-lasting use.

Weldable Door Hinges Size: 4-3/8 x 4-1/8 inches (110 x 105 mm), Thickness: 5 mm

Heavy duty weldable hinges, max load 500 lb ( 250 kg ) each pair.

Size: Total length is 5 inches, barrel diameter is 1-3/8 inches, and pin diameter is 3/4 inches, mounting plate gap is 0.6 inches.

Heavy Duty Barrel Gate Hinges: The gate hinges are made of cold rolled steel, strong and corrosion-resistant, giving it a longer service life.

Easy To Install: Welding required for installation, better remove the black powder coat on the mounting plate before you welding.

HEAVY-DUTY STRUCTURE - These heavy duty barrel gate hinges are made of heavy-duty metal iron, the texture is solid, the structure is firm and not easy to deform. They are strong enough to support many heavy-duty doors.

STRONG LOAD-BEARING CAPACITY - You will get 6 pieces/3 pairs of barrel door hinges, and each pair of hinges can bear up to 450 pounds when used in pairs. Built-in heavy-duty ball bearings ensure smooth and silent operation.

WELDING INSTALLATION - With a flat and smooth bottom, you can easily weld these heavy duty gate hinges to many planes. It is recommended to remove the black coating on the mounting plate before welding.

Carbon steel Q235B, unfinished surface treatment.

3”(75 mm) length, 3/4”(20 mm) width, 7/16”(12 mm) diameter of pin.

Ball bearing (diameter: 7 mm), can be 360 degree rotation and more smoother.

MATERIAL - 2 hinge pack of 100% stainless steel lift off Hinge 3 inch 75 mm Length x 50mm Width, Right side, SS pin is slightly Grind on top, so that your door fitting of hinge become Effortless.

DIMENSIONS - Thickness of hinge flap is 1.65mm approx & outer pin size 7.5mm approx.

ARCHITECTURAL QUALITY- Each hinge is Machined for precise installation and smooth movement.

Exterior Part Type: Door Hinge

The whole hinge is 9" long

Each individual flap on hinge is 3" long and 0.20" thick

COMPATIBILITY - 7" Barrel Hinge compatible with trailer ramps, trailer doors and heavy flat door. Replace the old hinge to provide strong support for the door and prevent the door from sagging.

MATERIAL- Constructed from high-grade steel, this hinge designed to resist rust, making it ideal for use in harsh conditions. Electrophoresis and powder coated surface treatment are used to effectively isolate air and water.

SPECIFICATION - Material:Steel; Color:Black; Surface Finish:Electrophoresis+Powder Coated; Length:6-3/4"; Barrel width:1-3/8".

1.Heavy Duty Design: Made of durable thick cold roll steel, this heavy duty gate hinges can hold up to 900 lbs capacity.

2.Smooth Rotation: The gate hinge features grease fitting and an internal ball bearing, making for a smooth and squeak-free operation.

3.Easy To Install: Welding required for installation, had better remove the black powder coating on the mounting plate before welding.

5" barrel weld plate 600 pound weight capacity per pair, measurements: barrel diameter x length x width 1" x 4-13/16" x 1-3/8" weld plate size 2-1/8" x 1-1/8". 3/8" thickness

5" barrel no weld plate 550 pound weight capacity per pair, measurements: 1" barrel width, 4" length

7" barrel weld plate 900 pound weight capacity per pair, measurements: barrel diameter x length x width 1-3/8" x 6-7/8" x 1-3/4" weld plate size 3-1/8" x 1-1/2". 3/8" thickness

What You Will Get: you will receive 4 pieces of weldable hinges, the size of them is about 3 x 3 inches, and the thickness is about 12 Ga, the weight is about 0.34 lb, besides, each hinge can bear about 25 lb of weight, you can choose them according to your needs

Strong and Reliable: this weldable metal hinge is made of steel, strong and reliable, and it is with nice bearing capacity, suitable for heavy gates and doors, it is not easy to break, you can use the hinge for a long time

Easy to Install: these heavy duty gate hinges do not need to be fixed with screws or other fasteners, only need to be welded at the place you want; These heavy duty gate hinges are dark gray and don't have coating, they can be painted to match the metal surface to which they are attached

Stainless steel 304 weldable barrel hinges, brushed finish.

Size: 3-1/8" x 5/8"(80 x 15.5 mm) , Pin size: 5/16" x 3/4" (8 x 21 mm).

Rotation degree: 360 degree.

Material: carbon steel Q235B, without finish.

Length: 3-1/8" (80 mm), Width: 1" (25 mm), Pin diameter: 9/16" (14.5 mm).

leaf thickness: 2.8 mm.

Carbon steel Q235B, unfinished surface treatment.

Length: 2-3/8" (60 mm), Width: 9/16" (15.5 mm), Pin size 1/2 x 3/8" (14 x 9 mm).

110lb ( 50kg ) Load capacity, 360 degree rotation and more smoother.

Stainless steel 304 weldable barrel hinges, brushed finish.

Size: 4" x 3/4" (100 x 19.5 mm), Pin Diameter: 3/8" x 1-1/8" (10 x 30 mm).

Rotation degree: 360 degree.

Max Load: 66 lb (30kg), Rotation angle: 345°

Size: 3-1/2x2-1/2x1/2 inch (90x65x12.5mm), Thickness: 2.4mm

OD: 12.5mm (1/2 inch)