Best 26 Ferrum Tools in 2026

Universal Heavy Duty Diesel Cylinder Liner Puller Alternative to PT-6400-C and 3376015.

This tool works on WET LINERS ONLY with a 3-7/8 to 6-1/4 bore, up to 15 deep, with a minimum wall thickness of .148.

Is applicable for Mack, Cummins, Volvo, Detroit, International and other Cat Engines 3176, 3196, 3300 Series, 3400 Series, 3500 Series, C10, C12, C15, C16 Maxxforce DT, DT360, DTA360, DTA466, DT466, DT530 (PLN),DT466E, DT530E, DT570, HT570.

Eaton Fuller Input Shaft Bearing Puller

Applications include 1 3/4" & 2" Shafts. This tools will not work on RT600 / 6600 series.

Prevents damage and allows efficiency

14pc Jake Brake Tool Set for Engine Intake and Exhaust Valve. 

Alternatives to 88880052, 85111377 and 88880053 

Used on intake and exhaust valve adjustment with or without engine brakes and engine brake rocker adjustment shims

1903018 Engine Barring Tool Alternative

Suitable:  PACCAR MX, PACCAR MX PMCI-2, PACCAR MX-13 PCI, MX-11 and PACCAR MX-13 Engines Commonly Used on Peterbilt and Kenworth T880 Trucks. DAF (35-42 TONS) (EURO 4) Truck

Package Include: One Engine Barring Tool. Material: High quality durable steel,  resistance to corrosion.

Detroit Diesel 60 Series Injector Puller J-47372 and 5876 tool replacement

Designed to remove injectors on Detroit Diesel 60 series engines.

Heavy Duty remover for smooth and easy injector removal.

[Perform Maintenance with Ease]: When it comes to removing, installing, and repairing hub or axle nuts on your vehicles, depend on the ABN Axle Nut Socket Set; Impact axle nut socket set includes 1 32mm axle socket nut

[Built to Last]: No need to worry about this large axle nut socket set 1-pack cracking under the pressure; Axle impact socket set is constructed from chromium-molybdenum steel (CR-MO) for strength and longevity; Impact quality with a 6-point design

[For Your Tools]: Use this axle nut impact socket set 1-pack with your ratchet, breaker bar, impact wrench, or torque wrench; Spindle axle nut socket set will fit standard 1/2-inch socket wrench drives

Combining the innovation of a GEARWRENCH ratcheting wrench with the requirements of the serpentine belt removal tool to provide the best possible combination

Complete tool set for removing or installing the serpentine belt on vehicles with a spring loaded belt tensioner pulley

Long bar can hold sockets directly or attach to the ratcheting wrench for maximum access

It is suitable for connection and transfer of solar cells, automotive battery and so on.

Converts SAE to 5.5mm x 2.1mm and 8mm DC COAX male plug.

The core adopts new pure copper, which has low loss, low heating and large current.

✅ DEEP CLEAN - Soft bristles get inside seams, creases, and other hard to reach areas to make sure no dirt or grime is left behind

✅ COMPACT - Easy to hold, size allows for use in cramped areas like car interiors or joints of leather furniture

✅ QUALITY - Produced to meet the highest standards, solid wood handle and synthetic bristles are build to last

Item model number : ?RCBMHD

Package Dimensions: 36.75 inch L x 9.25 inch W x 1.25 inch H

Retractable loop with grip cover

Brute Platinum heavy duty high speed steel reamers enlarge and align existing holes through steel, stainless steel, tough alloys, and aluminum

1/2" Straight Shank for use in 1/2" Chuck Power Tool

Left Hand Helix/Right Hand Cut sheers chips away from operator

Used for removing dirt, debris and mold lubricants from the repair area

Use prior to buffing

Power up components prior to fitting including:, Cooling fan motors, Fuel pumps, Window/Sunroof motors, Relays and Lamps, Wiper motors, Tests continuity in:, Switches, Diodes and Fuses, Relays

Fitted with 4.5mtr cable allowing access to the rear of the vehicle and supplied with instructions

Height: 55mm

OE-comparable harness (no pigtail connector) for hassle-free installation

OE-comparable mounting provisions ensure drop-in precise fitment

Rigorous and accelerated cycling tests to ensure product service quality and durability

JACK LIFTING: Ratchet style for easy adjustments

TOUGH MATERIALS: Tough enamel finish

CAPACITY: 3-ton maximum capacity per pair (3000 lb. capacity per jack stand)

Positive control and lock-out throttle protection

Adjustable Rear Exhaust

Safety throttle lever

【Use To】 11-Piece Tool Kit with Carrying Case – Pliers, Drive Handle, Sockets, Adapters to pull old valve seals and install new seals on overhead camshaft engines.

【Durable】This 11 pcs valve seal remover and installer kit is made of alloy steel for strength and durability, which is a unique steel with extreme anti-wear properties.

【Specifications】 Precision machined seal driving adapters guide the seal for proper setting; Valve pliers includes a 6” (15.2cm) handle and is 10.5” (26.7cm) long overall to reach narrow spaces; Pliers jaws are serrated for extra grip and has a 5.5” (14cm) maximum jaw opening; Knurled ends on 2” (5.1cm) adapters for tapping down the new seal and 6” (15.2cm) handles to provide extra grip; 3.5” (8.9cm) deep sockets for seals O.D. 10.8mm to 14.8mm

High quality material - The 2 jaw bearing puller is made of forged chrome vanadium steel material. It has high hardness and strength. Heat treatment process makes it more durable.

Adjustable Design - The 2 jaw gear puller can adjust the clamping depth and working space, suitable for gears and bearings of different sizes,design makes it easy to grasp the gears and bearings and pull them out.

Specification - The screw length of the two jaws puller is 6.5 inches/165mm,Bracket Length:6 inches/ 159mm,Screw Diameter (top): 14mm,Screw Diameter (bottom): 13mm,Claw Length:5.6inches/140mm,Claw Thickness: 3-5mm, For more size description please see size picture and video.

Profesional Replace Balancer Kit: This kit made you to removal and install balancer a breeze, very easy to use and a must-have tool if you're changing out a harmonic balancer. Made the job very quick and easy with no damage to any engine parts,the thrust bearing design on this model is nice, removal and installation of the balancer required minimal effort, went on/off evenly and smoothly

Wide Application: Comes with a number of metric and standard bolts so it should work for most applications. Flywheel Remover, Crankshaft Pulley Removal, Steering Wheel Pulling Set to remove worn or damaged harmonic balancers on any vehicle

Specifications: M16 x 2.0, M14 x 1.5, M12 x 1.5, 3/4-16, 5/8-18, 9/16-18, 1/2-20, 7/16-20; Black screws M10 x 1.5 x 35mm, M8 x 1.25 x 45mm, M8 x 1.25 x 65mm, M8 x 1.25 x 90mm; Silver screws UNC 3/8” x 2”, UNC 5/16” x 6”, UNC 5/16” x 3-1/2”, UNF 5/16” x 3”, UNF 3/8” x 1-1/2”, UNF 1/4" x 2-1/2”, UNC 3/8” x 3”, UNC 3/8” x 4-1/2”, UNC 3/8” x 2”, please carefully check your car's specifications

PRY AWAY: The ABN Jumbo Pry Bar Tool – 36” Inch Large Breaker Crowbar with Oversized Mechanics Handle for Heavy-Duty Automotive Prying is what you need to do serious pry work – Do not settle for anything less; Use in an automotive shop to check steering, suspension, brakes, or loose ball joints, bearings, and bushings on vehicles; Use when you need extra leverage, on the farm, or anywhere that involves work on heavy equipment

ANY SPACE, ANY ANGLE: Sharpened, bevel-end angled nose tip creates an extra leverage point and slips into tight spots so you can work in any space and at any angle

BUILT TO LAST: Heavy duty heat-treated chrome-plated long pry bar with 3/5” x 3/5” inch (16mm x 16mm) square shaft

Main Usage: As a connector for car oil pan ATF filling tool;

Compatibility: for VW transmission DSG, Thread M24 x 1.5;

Material: Aluminum alloy with anodized, Silica gel;

Roller Chain Connecting Puller Holder

For Roller Chain #25 #35 #41 #40 #50 #60 415H,428H, 520,530 and more

Made of Carbon Steel

✪ Fit for GY6 50CC 125CC 150CC ATC70 ATC90 ATC185 TRX 250R CR80 CR85 Yamaha Suzuki ATV scooter dirt bike,detail models pls see below fitment.

✪ Fits for GY6 125cc 150cc Chinese Scooter Parts Pit Bike ATV Dirt Bike.

✪ 24mm right hand thread use for---most GY6 50 4 Stroke Scooter Moped ATV.

WIDE APPLICATION --- Standard refrigeration charging hoses with 1/4" SAE male and female thread for refrigerants R410A,R22,R134a,R12.

HIGH WROKING PRESSURE --- 7" Long Charging Hose Completed with Solid Brass Manual Shut-off Ball Valve. Rated working pressure: 3000 psi burst / 600 psi Max. working pressure.

WELL DESIGN --- Designed to meet standard 1/4" SAE female refrigerant charging hoses set with shut off of red, blue and yellow. Ball valve design with a quarter turn of the valve handle switch for controls refrigerant. Can be operated with one hand - Screws onto charging hose end.

【 Multiple Usages 】Use in lubricating, anti-rust, etc. Ideal for lubrication and anti-rust for automobiles, bikes, and vehicles. **DO NOT recommend to use with only air as an air duster.** DO NOT fill with acetone, corrosive, strong acid, alcohol and alkaline fluids.

【 New Design of Threaded Two-Way Nozzle 】Advanced Nozzle with *thread* for convenient replacement. Two purposes nozzle with jet straight stream for specific spots and with wide mist spray for wide range area. Easily switch the adjustable nozzle from stream setting to spray setting.

【Air Pressure Stuffing, Upside Down Use 】-- Provides strong output pressure of fluid or air even when held upside down. This pressure aerosol can with the sufficient force for you to spray from any angles without the limitation of space. And 650 c.c. (22 US fl. oz) light weight for conveniently carrying to use with.

A perfect line checking tool.Ability to quickly adjust and assist technicians to accurately check vehicle problems.

This versatile automatic circuit tester contains 90 commonly used leads and connectors in a portable and easily stored case.This complete suite turns test and measurement equipment into a powerful automotive diagnostic tool for troubleshooting an increasing number of sensors, actuators, and electronic circuits.

Its variable resistance can be used to simulate coolant temperature sensor signals, throttle sensor signals to the vehicle ECU, avoid unnecessary new parts equipped with 2 sets of LED lights

INCLUDES THE FOLLOWING ELEVEN BLADES: 0.015" (0.381mm), 0.016" (0.406mm), 0.018" (0.457mm), 0.020" (0.508mm), 0.022" (0.559mm) , 0.024" (0.610mm) , 0.026" (0.660mm), 0.028" (0.711mm), 0.030" (0.762mm), 0.032" (0.813mm), 0.035" (0.889mm)

MADE IN USA with high quality materials and assembly

45 DEGREE OFFSET for easier use

OD: 0.130, ID: 0.122

APPLICATION: Suitable for Aptiv (Delphi) Weather-pack series connectors Male and Female

Equipped with ejector pin removal tool, suitable for ejecting terminals without wires.

Replacing OE#: 4921497, 4087989NX, 4087989, 4903479, 4921746, 4928594

Please make sure your original part number matches one of the numbers listed here and compare with pictures provided here before purchasing to ensure fitment.

Package Include: 1 x Exhaust Gas Pressure Sensor as pictured