Best Soldering Extraction Tools in 2026

Solder Fume Extractor/Smoke Trap/Smoke Eater/Smoke Filter/Solder Sucker Prevention Absorber DIY Working Extractor Fan for Solder Station.

0.4 inch thick activated carbon filter absorbs and captures fumes from solder, flux, chemicals, gases and helps to prevent dissipation into the room.

Optimized 3000 RPM high suction fan is low noise and allows you to remove fumes 5-6 inches away. 4 non-slip heavy duty rubber feet anchors the unit to the ground. Handy carrying handle allows you to move the unit easily.

Soldering Smoke Absorber, Electric Iron Welding Fume Extractor Soldering Smoke Absorber Remover DIY Fume Extractor Filter with Strong Suction.

A 24-inch flexible tube, Fume hood can adjust direction according to actual needs.

Adjustable optimized 6000 RPM high suction fan is low noise and allows you to remove fumes 5-6 inches away. The fan speed is adjustable. Suction: 40W, 6000 RPM, 52CFM, Noise Level: 55dbm, Life Expectancy: 50,000 hours, Static pressure: 125mmH2O.

Powerful Fume extractor removes Smoke fume, soldering fumes, flux smoke, odor from soldering stations, workstations, nails, glasswork, pyrography, paint etc quick, safely and efficiently.

Solder Flux fume extractor fan 496 model equivalent to the 493 plus extra filters. Comes with 3 Active carbon filters, Easily replaceable by swamping out old for new one in the filter slot. Pull filter guard out to remove filter and replace with new one. Then push back filter guard to hold filter in place.

Adjustable tilt for optimum solder smoke absorption angle from your workbench. Twist knobs at two ends to loosen and then adjust tilt of smoke absorber. Fasten knobs to secure fan front when desired tilt is obtained.

Essential Information - YIHUA 948DQ-I comes with 8 carbon filters, 2 fenders and 1 tiltable stand for the Solder fume extractor and a pair of detachable helping hands. This product can adsorb harmful fumes generated from soldering, effectively cleansing the air in your workplace, ensuring safety and working efficiency.

Dual-filtering Function - High-quality activated carbon filters at the front and rear help effectively filter the harmful particles and reduce odors from the fumes.

Tiltable Stand & Fenders - This fume extractor comes with a 30°-tiltable stand, allowing you to adjust the effective filtering areas according to needs. In addition, fenders on both sides can help reduce disruptive airflows and ensure effective fume extraction. Fumes generated within the straight-line distance of 10 cm can be adsorbed effectively.

Essential Information - YIHUA 948DQ-I comes with 8 activated carbon filters, 2 fenders and 1 tiltable stand for the Solder fume extractor. This product can adsorb harmful fumes generated from soldering or wood burning, effectively cleansing the air in your workplace, ensuring safety and working efficiency.

Dual-filtering Function - High-quality activated carbon filters at the front and rear help effectively filter the harmful particles and reduce odors from the fumes.

Tiltable stand & Fenders - This fume extractor comes with a 30°-tiltable stand, allowing customers to adjust effective filtering areas according to needs. Fenders on both sides can help reduce disruptive airflows and ensure effective fume extraction. Fumes generated within the straight-line distance of 10 cm can be adsorbed effectively.

Solder Fume extractor FES150 has Wide range of applications: Smoke Removal, Dust Removal ,Laser smoke purifier, Harmful Gases Removal ,Beauty nail salon, Printing and Soldering;

Multiple filtration system (3 layers) - KNOKOO fume absorber continuously exhaust the welding fume and lead mist, and rapid discharges it into the Pre-filter, HEPA filter and activated carbon filter to purifier smoke and unpleasant odors. each layer can be replaced separately. Three -layer filter Structure has larger dust capacitance than single-layer filter core, longer service time of filter core and more cost-saving.

Energy-saving and Environmental Protection KNOKOO fume extractor creates a powerful Systemic Flow 278m³/h to exhaust and purify air, high purification rate allow you to breathe fresh air again. Frequency converter DC motor, less power consumption, smoke filtered and discharged into the air, in line with the requirements of environmental impact assessment, environmentally friendly.

99.97% PURIFICATION RATE - BAOSHISHAN fume extractor can create a powerful 106 CFM airflow to exhaust and purify air. It has passed the environmental impact assessment test and certification, the purified air meets the hygienic standards. High purification rate allow you to breathe fresh air again.

3-STAGE FILTER - The 3D filters has 4 times the dust holding capacity of the old one. Cotton filter, central High Efficiency Particulate Air filter and activated carbon filter absorb all smoke, dust and harmful gases at work. The upwind diversion design allows harmful particles and gases to contact the 3-stage filters more fully and evenly, making the filter element more efficient. Truly no emissions.

WON'T TAKE UP SPACE - Our welding fume extractor's size is smaller than A4 paper. Suitable for small solder station and home DIY, 10.5x10.5x16 inch bulk can be stuffed under the table and won’t hinder your leg free and take up no space. Also equipped with 4 quality universal wheels with buckles, convenient to move and fix at any station.

[BUILT-IN AIR CIRCULATION FILTER] 3 STAGES FILTER.The laser fumes and soldering smoke and harmful gas generated by welding,soldering,nail salon, laser, it can be filtered through the primary filter cotton, HEPA filter layer, and activated carbon high efficiency filter layer to achieve 99.97% filtration and purification effect.Air circulation filter can prevent indoor fume from being discharged to the outside directly, achieving smoke absorb and purify air.

[Universal smoking pipe]Smoking pipe-360-degree universal adjustment, no need for external support. Can adjust the length of the pipe freely, adjustable air volume, directional adjustment of the air duct, and free positioning.

[99.97% FILTRAING AND PURIFICATION EFFECT AND HIGH PERFORMANCE MOTOR] High-power brushless DC motor to provide large air volume while keep low noise.High inhalation force and high smoking efficiency.

YIHUA 948DQ-III 2-In-1 station is designated to save your desk space by integrating a fume extractor and a 110W high-power soldering iron into one. The station comes with LED Nixie Display, X-2 Soldering Iron Holder, and Helping Hand. The soldering iron is 110W high-power and features with PID Temperature Stabilization, Sleep Mode, Auto Shutdown, °C/°F Conversion, and Digital Temperature Calibration.

The fume extractor comes with double filtering, with activated carbon filters fitted in both the front and the rear of the unit. The stand‘s tilt angle is adjustable, and the unit comes with attachment points for helping hands. This smoke absorber can adsorb the harmful particles inside the fume generated from soldering, wood burning, and other types of crafting work.

The unit’s fender design helps block disruptive airflow around the fume extractor and increases the effective fume extraction area. The fan can extract fumes generated within 10cm (3.9inches, ±10%) away from the fume extractor (effective distance measured directly from the front). The attachable helping hands (30cm，11.8 inches, ±10%) can help you secure the PCB, wires, or other objects when soldering, freeing your hand to focus on soldering.

【99.97% PURIFICATION RATE】—The FC100A fume extractor is ideal for small bench soldering. It has a maximum no-load power of 100W and is highly effective at filtering dust particles below 0.3 microns. The purification efficiency far exceeds that of small fume smoker absorbers. Keep your eyes and lungs free from pollution.

【MULTIPLE FILTRATION SYSTEM (3 layers)】—The unique 3-layer filter design that can effectively filter out 99.97% of harmful gases and tiny impurities. And FC100A is also equipped with 10 pre-filters specifically designed to absorb large particles of dust.

【PROFESSIONAL GRADE HIGH IODINE FILTER】—FC100A main carbon filter is composed of high iodine activated carbon, which has better adsorption and purification effect than ordinary activated carbon and longer service life. It is expected to last for 3000 hours and does not need to be replaced until then. Great value for money！

99.97% Purification Rate: The 330W DC motor of the fume extractor creates a powerful 270 CFM airflow to exhaust and purify the air. After using, the smoke purification rate is as high as 99.97%, allowing you to breathe fresh air again.

6-Stage Filters: The solder fume extractor has 6 layers for high-quality. Layer 1 is a cotton primary filter, Layer 2 is a PP filter, layer 3 is a glass fiber filter, and layers 4-6 are activated carbon filters. The upwind diversion design allows harmful particles and gases to contact the filters effectively and evenly, thereby making the filtration more efficient. Truly achieve no emission.

5 Adjustable Speeds: The speed of our welding fume extractor can be adjusted according to your work needs. Five stage speeds from strong to weak can be set to meet different working requirements. When it runs, the noise is lower than 60 db. Provides a quiet and comfortable working environment, which can improve your work efficiency.

Multiple filtration system (3 layers) - KNOKOO FED200 fume absorber continuously exhaust the welding fume and lead mist, and rapid discharges it into the Pre-filter, HEPA filter and activated carbon filter to purifier smoke and unpleasant odors. The three-layer filter cotton of primary, medium and main filter elements can be replaced separately, which prolongs the service life and reduces the cost of use.

Energy-saving and Environmental Protection KNOKOO fume extractor creates a powerful Systemic Flow 310 m³/h to exhaust and purify air, high purification rate allow you to breathe fresh air again. Frequency converter DC motor, less power consumption, smoke filtered and discharged into the air, in line with the requirements of environmental impact assessment, environmentally friendly.

KNOKOO Solder fume extractor exhaust and purify air by The 200W DC motor , suitable for soldering station and small laser marking. Brushless motor, low noise and high speed. The air volume can be adjusted freely. High inhalation power and high smoking efficiency.

Size MINI - The size of fume extractor is 153*153*76.5mm, it's the size of a notebook. It can be used at anywhere and only takes up a little space. It will not get in the way of your work and avoid the clutter of the workbench.

Filter PLUS - Solder smoke absorber has 3 stage filter. The first layer of high-density filter screen preliminarily filters PM50, the second layer of High Efficiency Particulate Air dust collection filter screen filters PM0.5, and the third layer of activated carbon dust removal filter screen absorbs harmful gases. Multiple filtration ensures your safety.

Purification MAX - The BAOSHISHAN fume extractor creates a powerful air volume to exhaust and purify air. The solder fume extractor can rapidly purify, quickly absorb smoke within 1 second. High purification rate allow you to breathe fresh air again and protect your respiratory tract and lungs.

SUCTION UPGRADE - The power and suction have been upgraded from 80W to 130W, from 180m3/h to 250m3/h. The suction per unit power has been greatly enhanced. Solder fume extractor has 3-level speed regulation, you can control the speed of suction according to the amount of smoke. Never let fume float their way over to your face.

FILTER PLUS+ - Three-layer filter effectively absorbs PM50, PM0.5 and harmful gases. Fume extractor use square vertical filter, which has 4 times larger dust capacitance than flat filter core. The expanded area of the filter element can reach 2.1 m2. Multiple filters with larger dust capacity ensure your safety.

15’’x10’’ LARGE SMOKING AREA - The smoker is equipped with two aerodynamics diamond covers. The size of the black cover is 4.7 "x 8.7", equal to a piece of A4 paper. The size of the transparent cover is 15 "x 10", 3 times the size of A4 paper, which can greatly improve the smoking effect. You can choose different diamond covers according to different sizes of PCB.

Portable, single user fume extraction system

No external ducting or compressor needed

Unit easily fits on any bench-top or under-bench

LOW COST, COMPACT, MOBILE UNIT CAPTURES HAZARDOUS FUMES LOCALLY: Suitable for benchtop soldering and electronic rework applications including handheld machining operations and light, limited use of solvents, adhesives and other light and medium duty industrial applications. Low profile unit is mobile, fits under your bench and comes complete with a self-supporting SteadyFlex Arm/Nozzle assembly, Wireless Remote Control to control features at a distance and 3-stage filtration system.

SELF-SUPPORTING STEADYFLEX ESD-SAFE ARM & NOZZLE ASSEMBLY: New SteadyFlex Arm is 52” long to reach all corners of your bench and stays put, exactly where you position it. One Flex Arm comes standard with System and includes 2.4” diameter Flex Arm and Nozzle. With the addition of a second SteadyFlex Arm (separate purchase required), the Arm-Evac 150 can provide fume extraction for up to 2 operators.

LOW-COST, EASILY CHANGED, DISPOSIBLE FILTER CARTRIDGES: Comes with 3-Stage General Purpose Combo Filter, perfect for benchtop soldering and electronic rework applications. A Filter Condition Monitor & Alarm on the Arm-Evac 150 alerts user of blockage or need to change the filter. A wide variety of filter options are available to meet virtually any benchtop application. Extend Filter Life with Time Set (automatically shuts unit off) and Total RunTime Counter (displays hours unit has been in use).

Safe Air Filtering - Utilizes 3 filters including HEPA and activated carbon beads for maximum extraction efficiency. Combined with sub-filter removes 97% of particles greater than 0.3μm.

Powerful Suction Fan - Redirects soldering smoke caused by burning flux and other fumes away from your face so you can breathe easy and concentrate on your work.

Articulating Extraction Hose - Easily position the fume extractor soldering arm exactly where you need it. Innovative locking hose design stays where you set it to suck up fumes effectively.

INDUSTRIAL FUME EXTRACTOR: The powerful 80W DC motor on OMTech's industrial-strength XF-180 fume extractor creates a powerful 106 cu. ft./min. airflow to pull in exhaust and purify air during any project from laser engraving to welding, soldering to machining; the provided 2.6" to 4" adapter lets this fume extractor connect to 40W OMTech cutting and engraving machines

3-STAGE FILTER: Our smoke extractor continuously pulls in your machine's fumes and debris, running them progressively through its cotton outer filter, its central HEPA filter, and its inner activated charcoal filter to absorb all your work's harmful gases and unpleasant odors

HIGHLY MOBILE: The 4 quality caster wheels move this small but dependable smoke purifier easily between your devices when needed and then lock smartly in place once you're ready to go; the hermetically-sealed extraction tube easily folds and fixes at the perfect angle wherever you need it

Fan Removes solder Smoke, soldering fumes, solder flux smoke on solder workstations, pyrography stations, stain glass work, nails, paint etc quick and efficiently with 3-stage filtration system.

Fume extration with Brushless motor ensures high speed with low noise, stable performance and low power consumption. 1. Active carcoal filter 2. Hepa filter (0.3um particles 99.97%) 3. prefilter. Noise: <55dB and System Flow: 200m3/h

Articulated Flex Arm & Nozzle Hose attachments included. Operational in standing or sitting mode for more direct smoke absorption from your workbench. 50mm diameter air inlet provides precise suction to work areas.

INDUSTRIAL FUME EXTRACTOR: The 330W DC motor on OMTech's industrial-strength XL-300 fume extractor creates a powerful 69 ft./sec. airflow to pull in exhaust and purify air during any project; perfect for any size OMTech laser engraving machine, it also works well with welding tools, soldering stations, CNC machines, and more; the provided 4" to 6" adapter lets this fume extractor connect to larger OMTech cutting and engraving machines

5-STAGE FILTER: Our smoke extractor continuously pulls in your machine's fumes and debris, running them progressively through its cotton outer filter, two polypropylene layers, and two inner activated charcoal filters to absorb all your work's harmful gases and unpleasant odors

HIGHLY MOBILE: The 4 quality caster wheels move this small but dependable smoke purifier easily between your devices when needed and then lock smartly in place once you're ready to go; the hermetically-sealed extraction tube easily folds and fixes at the perfect angle wherever you need it

Portable fume extraction unit for placement under or next to the bench top

H13 HEPA filter with a surface area of 2,4 m² for effective particulate filtering for 1 or 2 work stations and a 10% active carbon foam gas filter

An M5 Medium dust pre-filter that can be independently changed, increasing the life expectancy of the main filter

99.97% PURIFICATION RATE-FC150 is an excellent choice for welding and soldering applications. It can reach a maximum power of 150W at no load and has 5 times the filtration capacity of regular solder fume extractors. This product can effectively filter dust particles below 0.3 microns, achieving a purification efficiency of 99.97%.

MULTI-FILTRATION SYSTEM (3 layers) - The tight-fitting structure of the multiple filters allows for maximum filtration of harmful gases that are inhaled. Additionally, FC150 is equipped with 10 pre-filters that are specifically designed to absorb large dust particles!

DURABLE FILTER - Our HEPA filters and carbon filters are highly durable and can operate continuously for up to 4,500 hours. If the fume extractor accumulates too much dust after extended use, simply replacing the pre-filters is enough.

SOLDER FUME EXTRACTOR: Nopwer fume extractor has 4 to 5 times the air purifying capacity of ordinary solder fume extractor. Effectively absorbs smoke, dust and harmful gases from the air. Purify the air. And the purification rate is 99.99%.

THREE-LAYER FILTRATION SYSTEM: The solder fume purifier has three filtration layers. The filtration effect and filtration capacity are 4 times of the common single-layer filter cartridge. Each layer can be replaced individually. Long service life.

UNIVERSAL SMOKING TUBE: Highly sealed smoking tube with 80cm length. Can be adjusted 360 degrees. Free positioning without external support. Easy to install. Easy to operate.

99.97% PURIFICATION RATE- FC1002A fume extractor can work simultaneously with 2 ports and has a wide range of applications. No-load maximum power can reach 200W.It can effectively filter dust below 0.3 microns with a purification efficiency of 99.97%, which is 7 times higher than other fume extractors.

MULTIPLE FILTRATION SYSTEM (3 layers)- The unique 3-layer filter design can effectively filter 99.97% of harmful gases and tiny impurities. And FC1002A is also equipped with 10 pre-filters specifically designed to absorb large particles of dust.

DURABLE FILTER-Our HEPA filters and carbon filters are designed to filter particles up to 0.3 microns and have an expected life of 5500 hours, with no additional replacement required until then. Great value for money!

Fume extraction unit for 1 to 2 workplaces

Medium dust pre-filter M5 that can be separately changed, without having to change main filter

Exceptionally large HEPA H13 filter surface - 2.4m² for longer filter lifetime

Compact, portable, and easy to install

Compact, portable, and easy to install

High suction force and airflow

Occupational Health & Safety

Country of Manifacturer: Sweden

Manufacturer: Weller

SINGLE USER, ARM/PLENUM, PRE-HEPA-GAS, 100-240V

Single user fume extractor

Extraction arm included