Best Knokoo in 2026

Solder Fume extractor FES150 has Wide range of applications: Smoke Removal, Dust Removal ,Laser smoke purifier, Harmful Gases Removal ,Beauty nail salon, Printing and Soldering;

Multiple filtration system (3 layers) - KNOKOO fume absorber continuously exhaust the welding fume and lead mist, and rapid discharges it into the Pre-filter, HEPA filter and activated carbon filter to purifier smoke and unpleasant odors. each layer can be replaced separately. Three -layer filter Structure has larger dust capacitance than single-layer filter core, longer service time of filter core and more cost-saving.

Energy-saving and Environmental Protection KNOKOO fume extractor creates a powerful Systemic Flow 278m³/h to exhaust and purify air, high purification rate allow you to breathe fresh air again. Frequency converter DC motor, less power consumption, smoke filtered and discharged into the air, in line with the requirements of environmental impact assessment, environmentally friendly.

[BUILT-IN AIR CIRCULATION FILTER] 3 STAGES FILTER.The laser fumes and soldering smoke and harmful gas generated by welding,soldering,nail salon, laser, it can be filtered through the primary filter cotton, HEPA filter layer, and activated carbon high efficiency filter layer to achieve 99.97% filtration and purification effect.Air circulation filter can prevent indoor fume from being discharged to the outside directly, achieving smoke absorb and purify air.

[Universal smoking pipe]Smoking pipe-360-degree universal adjustment, no need for external support. Can adjust the length of the pipe freely, adjustable air volume, directional adjustment of the air duct, and free positioning.

[99.97% FILTRAING AND PURIFICATION EFFECT AND HIGH PERFORMANCE MOTOR] High-power brushless DC motor to provide large air volume while keep low noise.High inhalation force and high smoking efficiency.

Multiple filtration system (3 layers) - KNOKOO FED200 fume absorber continuously exhaust the welding fume and lead mist, and rapid discharges it into the Pre-filter, HEPA filter and activated carbon filter to purifier smoke and unpleasant odors. The three-layer filter cotton of primary, medium and main filter elements can be replaced separately, which prolongs the service life and reduces the cost of use.

Energy-saving and Environmental Protection KNOKOO fume extractor creates a powerful Systemic Flow 310 m³/h to exhaust and purify air, high purification rate allow you to breathe fresh air again. Frequency converter DC motor, less power consumption, smoke filtered and discharged into the air, in line with the requirements of environmental impact assessment, environmentally friendly.

KNOKOO Solder fume extractor exhaust and purify air by The 200W DC motor , suitable for soldering station and small laser marking. Brushless motor, low noise and high speed. The air volume can be adjusted freely. High inhalation power and high smoking efficiency.

Programmable 6 different length, preset and cycle cutting functions (eg 30-50- 80-100-150-200 mm, cyclic repeat cutting)

Cut tapes up to 60mm(2.36'') width or even two tapes at ones

The function is richer, the application range is wider, but the price is not have increased.

Durable: The fan has a strong motor which features a permanently lubricated bearing that operates quietly and requires no maintenance

Compact But Efficient: This duct fan is compact and lightweight enough to be installed in areas with little available space; With a diameter of 4 inches, speed of 2930 RPM and 100 CFM air flow

Low Noise: Superior balanced centrifugal impeller for long service life & quiet operation; A less than 30 dB noise level does not have any harm and will not disturb your work

Solder Fume Extractor/Smoke Trap/Smoke Eater/Smoke Filter/Solder Sucker Prevention Absorber DIY Working Extractor Fan for Solder Station.

0.4 inch thick activated carbon filter absorbs and captures fumes from solder, flux, chemicals, gases and helps to prevent dissipation into the room.

Optimized 3000 RPM high suction fan is low noise and allows you to remove fumes 5-6 inches away. 4 non-slip heavy duty rubber feet anchors the unit to the ground. Handy carrying handle allows you to move the unit easily.

5 Pack Set 0.4 inch thick activated carbon filter for Solder Smoker Absorber

0.4 inch thick activated carbon filter absorbs and captures fumes from solder, flux, chemicals, gases and helps to prevent dissipation into the room.

Stay safe and stop sucking on toxic smoke fumes.

HOW HAVE YOUR SURVIVED WITHOUT THEM: Our third hand/helping hands soldering stand is essential for every workshop, solder station, and craft room. Ideal for soldering, circuit board holding, assembly, repair, fishing lure, hobby, jewelry, and crafts. 4 adjustable metal gooseneck arms and stainless steel precision alligator clamp tips. 360-degree rotation. The tight grips are strong enough for you to position your hard-to-hold items freely.

KOTTO KNOWS WHAT YOU NEED: We are engineers creating high-quality and effective tools because we use them too! That's why our soldering helping hand tools have a weighted base and anti-slip rubber feet, making these soldering tools one of the sturdiest on the market. We engineered it this way to ensure a stable soldering iron station that does not move. The rubber feet protect your work surface from scratches and scuffs.

EVERY DETAIL COVERED: We love tools! You might say we are obsessed. That’s why we engineer quality into all Kotto products right down to the smallest detail. The alligator clamps on this multifunctional helping hands soldering station tool are made of stainless steel. Our thoughtful design allows the alligator clips to be easily rotated 360 degrees and remain strong enough to hold larger projects in place.

Delphi WeatherPack Crimper: IWS-1424B Metri-Pack and Weather Pack crimp tool aids in the assembly process of the Metri-Pack 150 & 280 and Weather Pack connector lines. The crimpers are designed to crimp the terminals and seals found in the Metri-Pack and Weather Pack series.

Stamped Terminal Crimping Tool: Crimps a wide variety of open barrel contacts, including D-subminiature in small size wire ranges. Crimps conductor and insulation portion of contacts in separate cavities.

Two Step Crimping: Designed to crimp the core and insulation wings in a separate motion. Tool must be closed twice to complete termination.Has three wire crimping and two seal crimping positions. Thin profile allows access to hard to reach areas.

INCLUDES: (1) Plastic Dust Hood featuring a Big Gulp 13” x 16” opening

APPLICATIONS: This catch all attachment collects a wide range of saw dust, debris and woodchips for an assortment of machines, including belt sanders, miter saws, table saws, lathes, drill press and planers without hoods

BUILD: Made with premium ABS plastic, this dust collector accessory is lightweight yet durable, anti-corrosive for in and outdoor usage, and offers high impact resistance for day-to-day wear & tear

Can be operated standing up or laying down in a low-profile position

Low profile position provides approximately 2-1/2 times the airflow and efficiency

ESD-safe by design and is made of ESD-safe materials

ADVANCED AIR CLEANING TECH: Combines a HEPA-13 filter that captures 99.97% of dust, pollen, smoke, mold, & other ultrafine impurities, combined with Plasma Ion Technology that projects positive and negative ions in the air allowing you to breathe easy.

CLEAN AIR IN MINUTES: Filters up to 630 SQFT per hour, and AHAM-Verified to exchange 126 SQFT 5 times per hour, allowing you to breathe cleaner air in minutes.

AUTO MODE: Automatically senses the air quality and adjusts the fan speed according to detected quality. Digital read out of % air quality and light band indicates when air quality is good-white, okay-orange, or poor-red, and adjusts to get back to good.

【iCrimp Backed High Quality】-Made of S50C high quality carbon steel with black oxide finish for anti-rust.

【Ergonomic Handle Design】The non-slip TPR handle is designed for providing you with easy operation and comfort crimps. Built in eyelet for lanyard.

【Polished Jaws and Size Mark】 Polished Jaw ensures a clean and sturdy crimp on non-insulated terminals. Each jaw is imprinted with wire size for easy identification.

High-Efficient Absorb: Optimized 2800 RPM high suction fan is low noise, Strong absorption, effectively absorb the toxic fumes, air purification.

Upgraded Design: Pure copper motor.The enclosure is made from metal.4 non-slip heavy-duty rubber feet anchor the unit to the ground. A handy carrying handle allows you to move the unit easily.

Easy to replace the filter: Includes two replacement filter.

DRK12B Removal Tool designed according to MIL-C-81969/19-02 REV.B ; DRK16B Removal Tool designed according to M81969/19-01 REV.8 ; DRK20B Removal Tool designed according to MIL-C-81969/19-06 REV.B;

DAK12B Installing Tool designed according to MIL-C-81969/17-05 REV.B ; DAK16B Installing Tool designed according to MIL-C-81969/17-04 REV.8 ; DAK20B Installing Tool designed according to MIL-C-81969/17-03 REV.B;

Applied to remove or install MIL series and some of NON-MIL round contacts without any damages to the electric connectors;

Absorb Harmful Smoke: The 0.4 inch thick activated carbon filter absorbs smoke from welding, 3D printing and a variety of workplaces, helping to purify the air quality in the area.

Super Strong Suction: 60W super power smoke absorber with super suction, more than 50% of the performance of similar products in smoking distance, smoking range and purifying air area.

Anti-skid Cotton Design: The base of fume extractor fan is 1:1 large anti-skid cotton design, which can not only prevent the product from scratching the table, but also reduce the noise brought by the fan during work.

Great for workspaces using more active fluxes

Removes flux fumes from soldering workbench

Fumes are absorbed by the replaceable carbon-activated filter

Easily release Delphi Weatherpack and Metri-pack connectors

WR01 removes from 16-18gague weather Pack connectors

MP150 removes from150 & 280 series Metri-Pack connectors

【Strong Absorption】 With the large 15050 pure copper motor and the 3300 RPM high suction silent solder fan，the effective smoke absorber distance can reach 7.9in. The absorption of the SainSmart Solder Fume Extractor performs 30% better than other Solder Fume Extractor and only generates less noise.

【Activated Carbon Filter】 The 0.3in thick activated carbon filter cotton effectively absorbs and seizes fumes from solder, flux, laser engraving and chemicals. It can filter the toxic substances and purify your work area effectively. The parcel includes 3 pieces of extra activated carbon filter cotton for replacement. It is very easy to replace and we suggest that you replace the filter every 3 months.

【Sturdy Metal Frame Design】Made of ESD-safe metal, it is much sturdier and more durable than the solder smoke absorber with plastic frame. It can be placed on your working area stably, no worries about being easily moved during use.

Applications: The ET-01 removal tool is designed to be used to remove individual Deutsch size 16 solid and stamped and formed pins and socket contacts from front-release connectors (such as DT, DTM, DTP, DTV, DRB, DRCP, and STRIKE* connectors).

Configuration: Multi-use tool with a small hook on one end to remove the wedgelock, and a small screwdriver on the other end to push back the locking fingers and release the contact.

Material: Hardened & rust-proof stainless steel body, super handy terminal removal tool for replace or repair worn electrical connections , to let you separate the wires from their terminals without causing damage to either.

SPECIAL DESIGN: Designed to extract internal components from DIP Sockets as well as LSI, MSI, and SSI Devices with 8-24 pins

UNIQUE HOOKS: Firmly grasp chips without damaging them

INSULATED HOUSING: Prevents accidental discharge to IC components

Absorb Harmful Fumes: The filter consists of foam and activated carbon, which can absorb toxic fumes from solder, Prevent the smoke from emitting into the room, protect human health.

Low-noise & Odourless: Soldering fan uses a double roller design, there is low-noise and odourless in the process of use, let you feel immersed in work.

Excellent Suction: The optimized fume extrator’s air flow is up to 110CFM/3080L/min, so it has stronger suction. perfect for soldering project.

✌ - Horizontal or vertical : Works efficiently in different environments. As long as you turn on the button, you can stop breathing the evil and smelly soldering fumes.

⚡ - ESD protection : Surge protection suppress voltage transients and divert excessive current away from sensitive electronic components to protect your electronics.

🎁 - Easy to replace the filter : Come with 2 filters, made of features urethane foam and activated carbon. Capture and absorbs of fumes and harmful smoke, ensures a breathable environment in your workspace.

520 W Powerful AC Motor: Motor Speed: 2800 r/min. Pressure: 373 Pa. Impedance protection motor contains windings with higher heat-proof when the rotor is locked. The pure copper motor features high-temperature proof performance, saving energy and keeping running stable.

3900 m³/h Strong Flow As Wind: Our industrial fan features maximize flow with low noise, whose impeller and blades are non-flammable. Fan Diameter: 12 in / 300 mm. We provide 7 metal blades for your long-lasting uses without damage.

Humanized Fan Guard Protection: This exhausting fan ensures a soft start due to its superior capacitor. The stainless steel piece makes a good operation, which is easy to use and maintain. In addition, it has a sturdy metal frame that achieves stable operation without vibrations.

This hand crimper has efficient ratcheting mechanism. Crimping is accurate and never damage the terminal,crimping is in one step.

Wire Crimper Design: Made of high-carbon steel which is treated with black oxidation,rust and corrosion resistance and insulated rubber, and ratcheting mechanism design help you take less strength to make a good crimp. Crimping range is AWG26-16, 0.5-1.5mm², suitable for 2.8mm, 4.8mm, 6.3mm spade connectors

This terminal crimper has a star wheel that you can adjust the handle crimp strength by adjusting the roulette to ensure uniform crimping each time.Heavy Duty Full-Cycle ratcheting terminal crimper with labor saving system help to a easier operation.The ratcheting function allows to secure a wire connector while you can insert the wires into the crimp.

12 Inch Utility Blower Extractor Fan: Color: Orange, Power: 520W, Frequency: 50 / 60 Hz, Material: Steel, Motor Speed: 2800 RPM, Air Flow: 2295 CFM / 3900 m³/h, Fan Diameter: 12 inch / 300 mm, Duct Expands Length: 32 ft / 9.8 m, Duct Thickness: 0.012 inch / 0.3 mm, Axial Fan Bearing Type: Ball Bearing, Noise: 69 dB(A), Static Pressure: 385 Pa, Current: 4.622A, Fan Dimensions(L x W x H): 13.7 x 14.8 x 15.8 inch / 348 x 376 x 401 mm, Net Weight: 36.38 lbs / 16.5 kg.

520W Pure Copper Motor: This portable ventilation fan is designed with a high-velocity, high-volume output, 100% copper winding motor. 2800 RPM motor speed is suitable for long-term ventilation. It can move a large amount of air quickly with low noise of 69 dB (A).

2295 CFM Large Air Flow: The large air volume of 2295 CFM / 3900 m³/h and 7 metal blades provides fast and effective ventilation, extracts the maximum air, and maintains high-efficiency work. Besides, 2 high-density covers to ensure portable ventilators work continuously and safely.

Soldering Smoke Absorber, Electric Iron Welding Fume Extractor Soldering Smoke Absorber Remover DIY Fume Extractor Filter with Strong Suction.

A 24-inch flexible tube, Fume hood can adjust direction according to actual needs.

Adjustable optimized 6000 RPM high suction fan is low noise and allows you to remove fumes 5-6 inches away. The fan speed is adjustable. Suction: 40W, 6000 RPM, 52CFM, Noise Level: 55dbm, Life Expectancy: 50,000 hours, Static pressure: 125mmH2O.

Powerful Fume extractor removes Smoke fume, soldering fumes, flux smoke, odor from soldering stations, workstations, nails, glasswork, pyrography, paint etc quick, safely and efficiently.

Solder Flux fume extractor fan 496 model equivalent to the 493 plus extra filters. Comes with 3 Active carbon filters, Easily replaceable by swamping out old for new one in the filter slot. Pull filter guard out to remove filter and replace with new one. Then push back filter guard to hold filter in place.

Adjustable tilt for optimum solder smoke absorption angle from your workbench. Twist knobs at two ends to loosen and then adjust tilt of smoke absorber. Fasten knobs to secure fan front when desired tilt is obtained.

ELIMINATES IRRITATING ODORS: Featuring 3 Stage Filter, the fume extractor effectively absorbs and seizes fumes from solder, flux, chemicals, gases, and ease to overcome disturbing odors in your working spaces.

HIGHLY VERSATILE: The high versatility of this fume extractor soldering fan enables you to stay relaxed and concentrated throughout Soldering, Wood-Burning (Pyrography), 3D Printing, Stained Glass, and Crafting, Nail Salons, Woodworking, Jewelry Making, and Smoking.

STRONG SUCTION WITH SLIGHT NOISE: The predominantly optimized soldering fan empowers you to remove fumes even 4-5 Inches away with minor noise. You will experience fresh, focused, and devoted working surroundings with this solder fan.

The powerful remove fume extractor absorber fan with adjustable arm and flexible table clamp, absorbing angle great for soldering station work.

Sturdy Aluminium alloy material and long-lasting working time.

Super easy to set up and easy to replace filter.