Best Iwiss in 2026

Cuts PEX Pipes from 1/8" to 1"

Capacity:PPR PEX cutter is an easy to use, great value cutting tool to handle cutting 1/8 in., 1/4 in., 3/8 in., 1/2 in., 3/4 in., and 1 in. PEX A, B, C pipe.

Easy Operation: Its spring-loaded handle opens easily so you can make multiple cuts quickly and accurately. The choice of both DIY home-owner and professional plumbers. Cuts PEX like butter.

Meet ASTM F1807 Standard

Used to fasten PEX pipe to brass or poly fittings using copper crimp rings

New Product,smaller and lighter but provide same same pressure,no requirement for strength

Wire Rope Swaging Tool: Designed for crimping copper and aluminum oval sleeves and stopping sleeves. Features drop-forged high grade alloy tool steel jaws with special heat-treatment, which assures a tight and clean compression on each crimping.

IWS-1608M wire rope crimping tool is for swaging 3/64'', 1/16'', 5/64'', 3/32'', 7/64'', 1/8'' wire rope onto aluminum ferrules. CRW-35 wire rope cutter cuts up to 1/8'' wire ropes.

Ideal for aluminum and copper end sleeves, duplex. Not designed for coated wire. Peel wire rope coating before swaging.

Meet ASTM F1807 Standard

With Interchangeable jaw set 3/8,1/2,3/4-inch, the tool itself is 1-inch

With Crimp Ring Removal Tool ,which Used To Remove 1/2-inch to 1-inch copper ring

Wire Rope Swager: IWS-1608B wire rope crimping tool has 5 cavities for 1/16’’, 5/64’’, 3/32’’, 7/64’’, 1/8’’, 5/32’’ & 3/16’’ wire rope cables. Swaging pressure is adjustable. Promises accurate & gauge free swages.

Wire Rope Cable Cutter: CWR-60 wire rope and cable cutter can be used with wire up to 1/8’’, features non-slip handles for easy grip. The shearing action is precise and leave no frayed ends.

All tool components are carbon steel and heat treated for maximum life. Smooth actuation mechanism allows secure connections with minimal force required.

Purpose: PEX-1 F1807 PEX Copper Crimp Ring Angle Tool is designed to secure 1 in. copper crimp rings into place within PEX piping systems

Compatibility: Ideal for connecting copper crimp rings made to ASTM F1807 standard (Sioux Chief, Watts, Nibco and other brands) with crimp style brass and poly PEX fittings manufactured to ASTM F1807/F877 or F2159 standards respectively (Everhot, Nibco, Watts, Zurn, Apollo, etc.)

Secure Connection: Connections may be checked for security using the Go/No-Go Gauge (included). Each clamp ring shall be gauged to ensure that it has been crimped properly and for the accuracy of the tool

Angle type head design helps reach into tight space and make pipe installation

Foldable handle saves labor and makes easier to crimp 1-inch copper ring

Well-polished jaw ensures no damage to copper ring and pipe,brings reliable pipe connection

Remove Tool Pex Ring Remove tool Ring Cutting Tool crimp ring removal tool copper ring removal tool.

Purpose: Copper Crimp Ring Removal Tool is designed to remove copper rings from PEX barb fitting connections to allow fittings to be re-used.

Capability: PEX Decrimping Tool works on 1/2 in., 3/4 in. and 1 in. copper crimp rings.

Meet ASTM F1807

Combo Crimping Tool for 1/2-inch and 3/4-inch

With high quality made from tool steel,come with 20PCS 1/2-inch and 10PCS 3/4-inch Copper Ring & Pex Cutter&GO NO GO Gauge

Meet ATSM F1807

With high quality made from tool steel,come with free GO NO GO Gauge

Simply pull back on the handles to open the jaws and crimp away

Heavy-duty wire rope hand crimper(Swaging tool) with solid construction lasts for years

Well polished jaw brings tight and clean compression on each crimping

Smooth surface provides security assurance to the users

Capability: IWS-FA PEX Crimp Tool Kit works with 4 sizes of PEX tubing - 3/8-in., 1/2-in., 3/4-in., 1-in. (The tool itself) and includes a Decrimping Tool (for crimp ring removal) -all in a compact and durable carrying case. Compatible with all types of PEX copper crimp rings and crimp style PEX fittings

Compatibility:Copper crimp rings made to ASTM F1807 standard (Sioux Chief, Watts, Nibco and other brands).Brass or Poly(PPSU) crimp style PEX fittings (F1807/F877 or F2159 standards respectively).All types and brands of PEX tubing - Everhot, Viega, Nibco, Watts, Zurn, etc.

Users Manual Included: Contains information on how to make a crimp connection, check connections with Go-No-Go gauge and calibrate the tool

Capacity：Works on spark plug wire diameter from 8.0-8.5mm2.

Purpose：LY-2048 is designed for use with various types of spark plugs wires and terminals.

Application: LY-2048 is a choice for DIY you own ignition cables/spark plug wires, especially for racers and racer shops.

Open Barrel Terminal Crimper: IWS-1424A open barrel crimp tool is designed to crimp non-insulated, open barrel terminals, also known as OEM terminals. It has five crimp stations that roll the open barrel terminal tabs over the wire and insulation, crimping them to the terminal.

Deutsch Stamped Contact Size 16 Crimp Tool: Designed for crimping Deutsch stamped pins and sockets, Size 16, AWG14 to AWG 18. Series: DT,HD30,HDP20,DRC,HD10,DRB,DTV.AEC,STRIKE,Jiffy Splice.

Two Step Crimping: Crimps conductor and insulation portion of contacts in separate cavities. Tool must be closed twice to complete termination.

Large Wire Crimper: HX-50BI battery cable ring terminal crimper is designed to crimp 8, 6, 4, 2, 1, 1/0 gauge battery lugs, making secure connection with cables, electrical appliances, and other power mechanisms in harsh-duty environments.

Rotating Die Set: EDM cutting dies are more dimensionally accurate than stamped dies, prevent inaccurate crimps. Compact rotation die for effortless die changing. Size Coded Crimping: When properly crimped, the die code number will be embossed on the connector for easy inspection to determine if correct die and connector combination were used.

Hex-Crimp Result: Hexagonal crimping is a strong mechanical connection, creating large area of high pressure contact between cable and connector which in turn results in low resistance and high pull-out values.

Versatile wire crimper set includes 1 ratchet crimper frame with 5 jaws, wire stripper and cross screwdriver. Satisfy the crimping needs of regular terminals, must have for electricians and DIYers.

The ratchet crimper features a precision full-cycle ratchet for accurate, repeatable crimps every cycle. The efficient ratchet mechanism also help to lock the terminals while insert the wire to perform a strong crimp. The adjustable compound action design ensure enough power into each squeeze.

Precise engineered casting jaws with rust prevention ensure always solid crimps for insulated terminals, non-insulated terminals, non-insulated tabs& receptacles.

Delphi WeatherPack Crimper: IWS-1424B Metri-Pack and Weather Pack crimp tool aids in the assembly process of the Metri-Pack 150 & 280 and Weather Pack connector lines. The crimpers are designed to crimp the terminals and seals found in the Metri-Pack and Weather Pack series.

Stamped Terminal Crimping Tool: Crimps a wide variety of open barrel contacts, including D-subminiature in small size wire ranges. Crimps conductor and insulation portion of contacts in separate cavities.

Two Step Crimping: Designed to crimp the core and insulation wings in a separate motion. Tool must be closed twice to complete termination.Has three wire crimping and two seal crimping positions. Thin profile allows access to hard to reach areas.

Capacity of AWG28-20 ( 0.08-0.5mm2)

PRECISE PRESS LINE: Wire-electrode cutting jaw ensure a high-precise crimping result.

Ratchet type pressure line clamp components are made of special carbon steel, handle material is PP+TPR

【Product upgrade】NEW 「 HX-50BI 」with 6 dies in AWG: 8,6,4,2,1,1/0,NOT IN METRIC

【Precise dies】Hexagonal rotating dies are processed with Wire EDM Cutting, more accurate than normal casting dies.

【Comfortable operation】Comfortable grip with antislip surface saves strength and improves user's experience.

Quick and easy to use with spring

Multi-size PEX cutter upto 1-inch

Only 0.15KG;Compact size for easy storage

Purpose: BJ0010C PEX cinch tool is designed for the creating secure stainless steel pinch clamp connections in combination with PEX barb fittings within PEX piping systems.

Purpose: BJ0010C PEX cinch tool is designed for the creating secure stainless steel pinch clamp connections in combination with PEX barb fittings within PEX piping systems.

One Hand Operation: One-handed gripping keeping the other hand free to hold a flashlight, ladder or pipe.

【General Features】Precision ratchet system makes it stable to hold terminals. Elastomer grips fit comfortably in hand. Durable dies made of chrome-molybdenum steel.

【Color Marks】Colored size marks help you to check the size of crimping die even in the environment where is unsufficiently lightly and improve your work efficiency.

【Capability】Crimps non-insulated 8 to 2 AWG solderless terminals and connectors for for auto electrical, marine and motorcycle wiring repairs or loom assembly.

「8 PCS CRIMPING TOOL SET」Includes 1 ratcheting crimper, 1 wire cutter&stripper, 6 quick exchange jaws in a convenient storage case

「VERSATILE SET」 Apply to heat shrink, non-insulated, open barrel, insulated and non-insulated ferrules, non-insulated terminals,OT&UT terminals

「PRECISE CRIMP」 Well polished jaw and ratchet mechanism ensure high-quality crimping effect after repeat crimp

Deutsch Crimping Tool: HD-2612 is a premium crimping tool for Deutsch solid contacts. Must have tool for making automotive electrical OEM wire harness with Deutsch connectors.

Crimp Range: A high quality Deutch crimp tool creates a precise crimp for 26 to 12 AWG solid pin Deutsch terminals. For use with Size 20, Size 16, Size 12 Deutsch solid contacts, which are used with Deutsch DTM, DT and DTP connectors respectively.

Four Indent Crimping: Built in die sets create a four-indent, 8-impression crimp providing the most uniform displacement of wire and contact material.

Wire Crimp Tool Kit: IWS-30J crimping tool kit contains a crimping frame tool along with 5 exchangeable die sets, designed to making electrical connection with insulated terminal, non-insulated terminal, ferrule, open barrel connector.

Precise Crimping: High-precision ratchet mechanism for complete crimps. Repetitive, standard-conforming high crimping quality due to precision dies and integral lock (self-releasing).

Labor Saving Operation: Crimper design provides low force to crimp while maintaining a high pull-off force. Built-in ratchet ensures a uniform crimp every time. Compound lever-action of narrow-span handles puts more crimping power into each squeeze. Comfort grips help to reduce hand fatigue.

【iCrimp Backed High Quality】-Made of S50C high quality carbon steel with black oxide finish for anti-rust.

【Ergonomic Handle Design】The non-slip TPR handle is designed for providing you with easy operation and comfort crimps. Built in eyelet for lanyard.

【Polished Jaws and Size Mark】 Polished Jaw ensures a clean and sturdy crimp on non-insulated terminals. Each jaw is imprinted with wire size for easy identification.

Metallic Tubing Cutter: CT-532 pipe and tubing cutter is designed for cutting copper, brass, aluminium, thin-walled steel, 5-32mm(3/16’’ to 1-1/4’’). Made from aluminum alloy and Wear-resistant steel blades ensures a durable and sturdy usage.Ergonomic knob reduce fatigue.

Neat Cutting: This pipe cutter makes fast, easy cuts in standard pipes. With clean, no burrs and smooth cuts on copper tubes and corrugated stainless steel tubing without deforming the peaks of corrugations.

Smooth Operation: Professional Tubing Cutter features an accurate 6-roller tracking system. This keeps the tube from threading and helps eliminate spiraling. The rollers and the blade utilize ball bearings for smoother action on thin stainless steel, all soft tubes like aluminum, copper, and PVC.

All-in-One PEX Piping Tool Kit: IWS-1234C PEX plumbing kit is designed to make copper crimp ring and copper sleeves connections in sizes 1/2-inch to 3/4-inch. The tool set includes PEX crimping tool(1), PEX cutter(1), 1/2’’ copper crimp ring(20), 3/4’’ copper crimp ring(10).

Patented Copper Crimp Ring: Annealed copper crimp rings are used to secure PEX piping to F1807 Brass or PPSU fittings. Designed for longevity and durability.

PEX Crimping Tool: Dual cavity plumbing PEX crimping tool for PEX Copper Crimp Rings 1/2" & 3/4". Allows for a one-handed crimp. Angle head design is useful for working overhead and in tight areas as it easily fits between joists. 

「12 PCS TOOL KIT」Applicable to Automotive, Heavy Duty, Marine, RV, AG, Construction Equipment and Maintenance Industries

「IWD SERIE CRIMPERS」Upgraded internal structure ensures the stability and power equality on the pins,brings high precision to solid contacts for Deutsch DT,DTP,DTM,DTHD,HD10,HD30,HDP20,DRC,DRB serie and Amphenol AT,ATP,ATM,ATD serie connectors

「IWC-1424A OPEN BARREL CRIMPER」Five cavities perform B shape conductor for Deutsch stamped &formed contacts,and other open barrel terminals with crimping range AWG24-14

2-IN-1 PEX Crimping Tool: IWS-1234W PEX crimp dual tool allows you to make a secure connection to 1/2 In. and 3/4 In. PEX with copper crimp rings.

Compact Design: The angled head allows easier access to connections in tight spaces. There are no loose components, jaws to change, or adjustments to be made to create a connection.

Compatibility: Ideal for connecting copper crimp rings made to ASTM F1807 standard (Sioux Chief, Watts, Nibco and other brands) with crimp style brass and poly(PPSU) PEX fittings manufactured to ASTM F1807/F877 or F2159 standards respectively (Everhot, Nibco, Watts, Apollo, etc.).