Best Jonard Tools Crimpers in 2026

Delphi WeatherPack Crimper: IWS-1424B Metri-Pack and Weather Pack crimp tool aids in the assembly process of the Metri-Pack 150 & 280 and Weather Pack connector lines. The crimpers are designed to crimp the terminals and seals found in the Metri-Pack and Weather Pack series.

Stamped Terminal Crimping Tool: Crimps a wide variety of open barrel contacts, including D-subminiature in small size wire ranges. Crimps conductor and insulation portion of contacts in separate cavities.

Two Step Crimping: Designed to crimp the core and insulation wings in a separate motion. Tool must be closed twice to complete termination.Has three wire crimping and two seal crimping positions. Thin profile allows access to hard to reach areas.

【iCrimp Backed High Quality】-Made of S50C high quality carbon steel with black oxide finish for anti-rust.

【Ergonomic Handle Design】The non-slip TPR handle is designed for providing you with easy operation and comfort crimps. Built in eyelet for lanyard.

【Polished Jaws and Size Mark】 Polished Jaw ensures a clean and sturdy crimp on non-insulated terminals. Each jaw is imprinted with wire size for easy identification.

UNIVERSAL COMPATIBILITY: Designed for use on F connectors, BNC connectors, and RCA connectors. The tool is ideal for installing CATV and CCTV network cables.

EASY OPERATION: Dual-head and adjustment dial to accommodate various connectors such as RG59, RG6, RG7, and RG11 quickly and easily (BNC connectors must be at least 1. 5 in length)

ACCURATE ADJUSTMENTS: Guide rule on side of tool to facilitate precise and accurate tool adjustments

1. Product Type: High precision wire rope crimping tool with Aluminum double barrel ferrule crimping loop sleeve kit

2. Product Material: Crimping tool was made of heavy duty stainless steel, hard and sturdy

3. Package Include: 3 Size 150Pcs double barrel ferrule with a crimping tool in a Square paper box

🌷 High Quality ------ The Wire Rope Crimping Tool uses high quality carbon steel to support the hardness of the clamp. After black oxidation treatment, a dense oxide film is formed on the surface, so there is no need to worry about being corroded by sea water or occasionally rusted inappropriately.

👍 4 Crimping Positions and 2 Hardened Side Cutters ------ The 4 crimping positions include:0.5-0.1mm, 0.1-0.5mm, 1.0-2.0mm, 2.2mm.It can easy crimp copper / aluminum sleeve and more from 50-450 lb test line.

💎 Product Feature ------ Non-slip grip with cushion, and safety lock, stainless steel grip wrapped with non-slip cushion and with safety rope. The safety lock can easily keep the edger closed. It help you cut the wire / monofilament without frays and the strong spring open the cutters instead by your hands.

SPECIFICALLY DESIGNED: To tighten or loosen BNC connectors in high density locations

LONG LENGTH: 12" overall length provides a long reach, allowing you to install or remove BNC cables in hard-to-reach places

ERGONOMIC HANDLE: Provides increased comfort and leverage

Professional Crimping Tool Set: This crimper set includes a terminal crimper, 5 crimping jaws, a screwdriver and a storage bag. A professional ratchet crimping tool kit for electrical connection.

Durable To Use: This ratcheting wire crimper is made of special manganese steel, which is durable enough to crimp most wire terminals and harden dies. Ensure a lifetime of use.

Labor-saving & Safety Designed: With self-adjustable ratchet mechanism design, the racheting crimping tool is easy to operate. Automatic Release Device adds safety when in use.

Professional Crimper Kit - This crimper features an efficient ratchet mechanism and a precision machined crimp die for a solid crimp. The kit includes 1 * Crimper 2 * Spanner 1 * Stripper and 8 pairs of solar connectors.

Precise Mechanics - The crimping process is accomplished by pressing the handle through a complete ratcheting cycle until the handle is automatically released. Due to the ratchet, you are able to secure the connector first and then insert the wire into the crimp.

Adjustable Crimp Force - The tool has a knob that adjusts the crimp strength to ensure the right crimp force for your project. Equipped with a quick release lever allows the crimper jaw to be opened in any position.

Model: 4CS-06, only one professional crimper die

For 22-10 AWG Terminal: Suit for non-Insulated butt connectors or bare ring terminals.

Crafted From Special Steel: The surface is frosted, making the whole wear-resistant, durable, rustproof, and more beautiful.

NO NICKS OR SCRATCHES: Cleans away excess dielectric material from the center conductor of distribution or trunk cables without nicking or scratching the conductor’s surface

MAXIMUM DURABILITY: Housing made from a glass-filled Lexan material and blades made from a rugged polycarbonate material for long life and maximum durability

VERSATILE USE: Can be used on any type of COAX cable, including RG6 and RG59

ELECTRICAL CRIMPER: Designed to prep electrical cables, this electrical lug and terminal crimper is perfect for cutting and stripping wires, and crimping insulated and non-insulated lugs and terminals

CRIMPS: Crimps insulated butt connectors; 22-26 AWG, telephone piercing spade lugs; 22-26 AWG, open barrel connectors; 20-22 AWG/ 14-18 AWG, and non-insulated terminals; 10-14/16-18/20-22 AWG

STRIPS: Strips 22 AWG - 16 AWG (1.3 to 0.6 mm) electrical wires

TERMINAL CRIMPER: Perfect for crimping 10-22 AWG insulated and non-insulated solderless terminals and connectors

TAPERED NOSE: Allows access in hard-to-reach places

WIRE CUTTER: At tip of the head cleanly cuts 10-22 AWG wire

Coax crimping die^For universal crimper^Cable size: CATV "F" connectors RG59/RG6

Fiber optic crimping die^For universal crimper^Cable size: Crimps FC, ST, SC, LC, SMA, and MT-RJ Connectors

NETWORK CABLE PREP: Includes all the necessary tool for cutting, crimping and terminating cat5 and cat5e network cables

RATCHETING CRIMPING TOOL: Crimps RJ45 Pass-Through Connectors onto CAT5, 5E, or 6 cables

PUNCHDOWN TOOL: Punches down wire onto 110-type blocks

Replacement Plunger for CTF-230 Compression Tool

Color coated

Durable

EASY TO USE: Pass-through style makes it very easy to crimp RJ45 connectors without any measuring needed

CLEAN CRIMPING: Cleanly trims the wires flush to the end face of RJ11/12 and RJ45 connectors and even trims off the end wires

VERSATILE USE: Intended for use with 28 to 22 AWG flat/round, solid/stranded telephone and data cables

Designed for stripping, splicing and crimping

Package Dimension : 27.94 centimeters L x 6.858 centimeters W x 1.27 centimeters H

Country of Origin: CHINA

This fully ratcheted crimper offers exceptional performance^Designed for minimal closing force (higher crimp force produced with lower hand force), plus there is no break-over hand force making the last click easily achievable^The head is angled to lessen the need to bend the wrist awkwardly^Ergonomic handles are dual component with a soft rubber insert plus the tool includes a built in safety release mechanism^Very durable steel housing accommodates coax dies

INCLUDES MC4 CRIMPING DIE: This crimper includes an MC4 crimping die, but it is able to crimp MC3 connectors also by just switching the die with an MC3 die such as our part number SPD-MC3 (sold separately)

PERFECT FOR SOLAR PANEL INSTALLATION: Designed to crimp MC4 connectors on 14, 12, and 10 AWG solar panel wire, this crimper includes is ideal for installing and maintaining solar panel connectors

CONVENIENT FUNCTIONS: Crimper has parallel jaws with an adjustable pressure gear, built-in ratchet for accurate crimping, plus a self-locking design to crimp solar panel connectors perfectly every time

Rugged and ergonomic: Tool is made from steel and uses dual material grips for added comfort. Ratcheting mechanism provides additional comfort and has a safety release.

For multiple sizes of modular connectors: Crimps 4, 6, 8 position connectors: Tool has 3 crimping locations, 8 position for RJ45 connectors, 6 position crimping location for RJ11 and RJ12 and has a 4 position crimper on the back of the tool for 4 positon RJ22 connectors.

Versatile cable cutter and stripper: Tool has flat cable cutter and stripper. Stripper can strip and cut for 6mm long conductors or 12mm long conductors. Additionally, the tool has a round cable jacket stripper.

WHAT'S IN IT: Solar Panel Crimper, MC4 Crimping Die, MC3 Crimping Die, (2) Solar Panel Spanners, Insulated Phillips Head Screwdriver, Insulated Cabinet Slotted Head Screwdriver, Cable Cutter, Wire Stripper/Cutter, Carrying Case

PERFECT FOR SOLAR PANEL INSTALLATION: Designed to make installation and maintenance of solar panels easy and crimp MC3/MC4 connectors on 14, 12, and 10 AWG solar panel wire

SOLAR PANEL CRIMPER: Crimper has parallel jaws with an adjustable pressure gear, built-in ratchet for accurate crimping, plus a self-locking design to crimp solar panel connectors perfectly every time

CTF-180: 360° compression tool for 360° F connectors

UST-125: Versatile COAX stripping tool for RG59, RG6, RG7, and RG11 COAX cables

TWAF-71630: Torque wrench for 7/16" F connectors applies 30 in-lb of torque, ensuring solid connections every time

ULTIMATE CRIMPER: Crimps RJ11/12 and RJ45 pass-through connectors with additional crimping slots for shielded connector tails, perfect for any network technician working with CAT3, CAT5, CAT5e, CAT6, or CAT6A cables

VERTICAL CRIMP ACTION: Crimps RJ11, RJ12, and RJ45 pass-through connectors perfectly every time

CLEANLY TRIMS: Cleanly trims wires flush to the end face of pass-through RJ11/12 and CAT6A RJ45 connectors

Package Dimensions: 1.15" (L) x 4.25" (W) x 10.5" (H)

Product Type: Precision Measuring

Package Quantity: 1

TURRET HEAD: This turret head is perfect for crimping 12, 16, and 20 front release connector contact pins onto 12-26 AWG wire

VERSATILE FUNCTION: Compatible with most other crimpers in this style, including our CMP-1226

EASY OPERATION: Color-coded turret makes it easy to select the correct contact size quickly and easily

PROFESSIONAL CRIMPING TOOL - this hand crimper has efficient ratcheting mechanism and professional grade crimping die for proper rock-solid crimps every time. This crimping tool works best with heat shrink connectors

PRECISE RATCHETING MECHANISM – wire connectors are crimped by squeezing the handle through a complete ratcheting cycle until the handle releases automatically. The ratcheting function allows to secure a wire connector while you can insert the wires into the crimp

ADJUSTABLE CRIMPING FORCE - The tool has a star wheel that allows to adjust crimping height to ensure the right amount of crimping force depending on your crimping project. A designated quick release lever allows to open the crimper jaws in any position

ADAPTERS: These adapters are designed to join two male RG6, RG6 Quad Shield, RG59, RG59 Quad Shield CATV F connectors

3.0 GHZ: For performance up to 3.0 GHz

GOLD-PLATED CONTACTS: Gold-plated contacts for maximum performance

VS-3 STYLE: Designed to crimp various AMP Picabond connectors onto 19 - 28 AWG wires

PERFECT CRIMPS: Moveable anvil and two fixed dies crimp the connector perfectly every time

BUILT-IN WIRE CUTTER: Locates the connector on the anvil and cuts excess wire during crimping

Kit contains: punchdown tool with 66 and 110 blades, multipurpose universal cable stripping tool, ergonomic electrician scissor

Also contains: spudger, can wrench with 22 AWG wire stripper, multipurpose needle nose crimping plier with cutter and the cordura pouch

The affordable and reliable punchdown tool kit