Best Jonard Tools in 2026

ERGONOMIC HANDLE: The 7/8 inch diameter impact resistant thermoplastic handle is ergonomically designed for increased comfort and torque and color coded orange

CONVENIENT DESIGN: Sockets are thin-walled so they can access tight spaces such as locking devices on terminals and cabinets

LONG LENGTH: Total length is 7 inches with 1 1/4 inch (31.75 mm) deep sockets to fit over long binding posts

Mpn: JIC-186

Country of manufacture: Taiwan

Manufacturer: Jonard Tools

PATENTED DESIGN: Patented open-ended head allows easy access to connectors, nuts, and bolts

PRECISION TORQUE: Ratcheting box-end has 12 points of contact to provide maximum torque

CONVENIENT FUNCTIONS: Belt loop hole for convenient storage and transportation

PRECISION DESIGN: Designed to fit our JIC-186 or JIC-195 Scissors perfectly

NYLON HOUSING: Rugged nylon housing provides high durability and long life

BELT CLIP: Included belt clip keeps tool securely on your belt

VERSATILE USE: The can wrench is designed to fit over long binding posts and can be used for multiple applications such as opening telephone box fasteners and tightening nuts on binding post terminals

CONVENIENT DESIGN: Sockets are thin-walled so they can access tight spaces such as locking devices on terminals and cabinets

LONG LENGTH: Total length is 7 inches with 1 1/4 inch (31.75 mm) deep sockets to fit over long binding posts

PATENTED DESIGN: Patented open-ended 15° angled head allows easy access to connectors, nuts, and bolts

VERSATILE USE: Double ended design allows one end of the wrench to tighten while the other can loosen

CONVENIENT FUNCTIONS: Belt loop hole for convenient storage and transportation

ESSENTIAL KIT: Featuring our EBC-400 Single Gang Electrical Wall Box Cutter and our WTL-12 Wall Template & Level, the EBW-412 is perfect for installing single gang electrical wall boxes.

WTL-12: Has built-in levels and a rubber backing to allow you to position the template exactly where you need it

COMPATIBLE WITH: Carlon B114R & B12R single gang boxes, Carlon B225R double gang boxes, Carlon SC100RR low voltage plates, Arlington Industries LVL1 and LVL2 boxes, and many other brands of non-metallic single and double gang boxes

QUICK & EASY: Cuts through drywall in seconds, making this the fastest and easiest tool to use for installing single gang electrical boxes

PRECISION CUTTING: Cuts a hole 4" x 3 3/4" in drywall, perfect for installing old work double gang electrical boxes

VERSATILE USE: Compatible with most industry-standard oscillating multi-tools

PATENTED DESIGN: Patented open-ended 15° angled head allows easy access to connectors, nuts, and bolts

VERSATILE USE: Double ended design allows one end of the wrench to tighten while the other can loosen

CONVENIENT FUNCTIONS: 4” length and included belt loop hole for convenient storage and transportation

HIGH DURABILITY: 1.5" long shaft made from high quality steel and chrome finish for exceptional strength and long life

EXCEPTIONAL STRENGTH: Internal shank flanges to prevent the handle from slipping

MAGNETIZED TIP: Black oxide finished tip to prevent corrosion and magnetized to hold fasteners for easy removal and installation

IDENTIFIES CABLES: Identifies cables in an MDU and detects troublesome short circuits accurate up to 5,000 ft (1,500 m)

VISUAL INDICATION: LED light indicates splitters, DC shorts, and other self-grounding devices in cables

VOLTAGE PROTECTED: Voltage protected up to 52V, which can be used on most communication and electrical cables

HIGH DURABILITY: Made with an S2 steel shank with a chrome finish for exceptional strength and long life

INCREASED SAFETY: Internal shank flanges to prevent the handle from slipping

MAGNETIZED TIP: Black oxide finished tip to prevent corrosion and magnetized to hold fasteners for easy removal and installation

HIGH DURABILITY: Made with an S2 steel shank with a chrome finish for exceptional strength and long life

INCREASED SAFETY: Internal shank flanges to prevent the handle from slipping

MAGNETIZED TIP: Black oxide finished tip to prevent corrosion and magnetized to hold fasteners for easy removal and installation

EASY OPERATION: Ratcheting box-end has a 15° angled head which makes your work faster and easier

PRECISION TORQUE: Ratcheting box-end also offers 12 points of contact to provide maximum torque

VERSATILE USE: Wrench-end has a 15° offset to allow easy access to connectors, nuts, and bolts

SPLICE CONNECTOR: Designed to splice two wires together quickly and easily, these splice connectors are perfect for splicing 22-26 AWG (0.64 - 0.40 mm) telephone wires

SELF-STRIPPING DESIGN: Self-stripping design, so no separate stripping needed

GEL-FILLED: Gel-filled cavity provides moisture resistance, and the housing is insulated to prevent accidental shocks

Designed for inserting, removing, or adjusting return springs in relays

Includes (5) Pull & Lift Spring Hooks

Fork lifter on one end of the hook used for lifting up delicate electronic components without damaging them

LINEMAN'S WRENCH: Designed with two open-ended wrench heads and an oval hole for turning pole steps, this lineman’s wrench is perfect for telecom and datacom work applications

LARGE END: Large end of the wrench accommodates 5/8” and 3/4” bolts to NEMA standards

SMALL END: Small end of the wrench accommodates 3/8” bolts, 1/2” bolts, and 1/2” drive screw heads to NEMA standards

Connector-Crimping Plier with Side Cutter designed to press UG, UR, UY, 709 series connectors, crimping "B" type connectors, and AMP tel splice connectors

A special stop behind cut out prevents damage to connectors

Utilized on combinations of plastic and pulp insulated 19, 22, 24 and 26 gauge copper conductors as well as 20 gauge plastic insulated copper steel wire

Five tools in one, combines crimper for UR/UY/UG, AMP tel splice connectors

709 series connectors, crimping "B" type connectors and a long nose pliers

With a crusher, cutter, 0.030" stripping hole and yellow plastic handle

Hand Tools

Manufacturer: Jonard Tools

Country of manufacture: Taiwan

HEAVY DUTY: Designed for heavy duty use, these electrician’s scissors are made of chrome vanadium steel and reinforced with a special hardening process for greater durability and cutting performance

CLEANER CUTS: One blade has a serrated edge that holds wire in place for cleaner cuts

STRIPPING NOTCHES: Notched to strip 18-20 AWG and 22-24 AWG wire with ease

The WS-5 is designed with a precision-ground "V" notch blade for superior stripping results

Vinyl cushion grips provide excellent comfort

This tool is spring loaded with a locking latch and features looping holes for solid wire

EASY OPERATION: Simply open the tool, place the fiber in the proper groove, lock the tool, and pull the tool to slit

VERSATILE USE: Precision grooves are sized 1.2 - 1.5 mm | 1.5 - 1.8 mm | 1.8 - 2.1 mm | 2.1 - 2.5 mm | 2.5 - 2.9 mm | 2.9 - 3.3 mm to accommodate cables 1.2 mm - 3.3 mm without damaging the fiber inside

LIGHTWEIGHT AND PORTABLE: Weighing only 4 oz and measuring 2.87" X 1.5" X 2.1" With included tethering hole, This tool is perfect to use in tight spaces and on the go

UNIVERSAL COMPATIBILITY: Designed for use on F connectors, BNC connectors, and RCA connectors. The tool is ideal for installing CATV and CCTV network cables.

EASY OPERATION: Dual-head and adjustment dial to accommodate various connectors such as RG59, RG6, RG7, and RG11 quickly and easily (BNC connectors must be at least 1. 5 in length)

ACCURATE ADJUSTMENTS: Guide rule on side of tool to facilitate precise and accurate tool adjustments

Product 1: EASY OPERATION: Simply open the tool, place the fiber in the proper groove, lock the tool, and pull the tool to slit

Product 1: VERSATILE USE: Precision grooves are sized 1.2 - 1.5 mm | 1.5 - 1.8 mm | 1.8 - 2.1 mm | 2.1 - 2.5 mm | 2.5 - 2.9 mm | 2.9 - 3.3 mm to accommodate cables 1.2 mm - 3.3 mm without damaging the fiber inside

Product 1: LIGHTWEIGHT AND PORTABLE: Weighing only 4 oz and measuring 2.87" X 1.5" X 2.1" With included tethering hole, This tool is perfect to use in tight spaces and on the go

Easy operation: simply open the tool, place the fiber in the proper groove, Lock the tool, and either pull the fiber through to slit, or rotate the tool around the fiber to ring

Versatile use: The slitter has 5 different sized precision grooves to accommodate cables 5 - 10 mm in diameter without damaging the fiber inside

Specially designed: for use on Corning fiber cables: minixtend fast access binder less, HD minixtend, and other similar styles

SECURITY SHIELD TOOL: To be used on 7/16” hex shielded F connectors, perfect for locking or unlocking security shields on F connectors

EXTENDED SHANK: Makes this tool easy to use with torque wrenches for precise adjustments

MAXIMUM DURABILITY: Machined and heat-treated steel with black oxide finish for maximum strength and durability

WHAT’S IN IT: can wrench, ergonomic cable splicing knife, electrician's scissors, probe pick, and pouch (made of durable PVC material with metal clip)

CAN WRENCH: Ideal for opening telephone box fasteners and tightening nuts on binding-post terminals, with a built-in 22 AWG wire stipper

CABLE SPLICING KNIFE: Used for cutting through many types of high strength cables and insulation, ergonomic non-slip grip for increased comfort and control

VERSATILE USE: Designed for use on long style F connectors such as PPC Aquatight EXXLWS or EX-XL connectors. The tool is ideal for installing CATV network cables.

EASY OPERATION: Rotatable to accommodate various connectors such as RG6 and RG11 quickly and easily with a fixed design so no adjustments are needed

HIGH DURABILITY: Made of high carbon steel with a black oxide finish for longer life and durability

PRECISION DESIGN: Provides perfectly calibrated amount of torque to prevent damage from overtightening or signal loss from under tightening

VERSATILE USE: Calibrated to 30 in-lb. (3.39 N-m) to consistently meet most manufacturers’ recommended torque requirements for their F connectors

CONVENIENT FUNCTION: Ergonomic design with angled head and cushion grip for maximum leverage and comfort as well as audible click sound that lets you know when the connector has reached its maximum torque