Best Jonard Tools Soldering Insertion Extraction Tools in 2026

DRK12B Removal Tool designed according to MIL-C-81969/19-02 REV.B ; DRK16B Removal Tool designed according to M81969/19-01 REV.8 ; DRK20B Removal Tool designed according to MIL-C-81969/19-06 REV.B;

DAK12B Installing Tool designed according to MIL-C-81969/17-05 REV.B ; DAK16B Installing Tool designed according to MIL-C-81969/17-04 REV.8 ; DAK20B Installing Tool designed according to MIL-C-81969/17-03 REV.B;

Applied to remove or install MIL series and some of NON-MIL round contacts without any damages to the electric connectors;

Price For: Each For Use With: Anderson Powerpole & Multipole Connectors & Terminals Tool Body Material: Steel RoHS Compliant: NA

Solder Dispenser

Country Of Origin: United States

Item Package Dimension: 9.0" L x 6.0" W x 0.375" H

Easily release Delphi Weatherpack and Metri-pack connectors

WR01 removes from 16-18gague weather Pack connectors

MP150 removes from150 & 280 series Metri-Pack connectors

Applications: The ET-01 removal tool is designed to be used to remove individual Deutsch size 16 solid and stamped and formed pins and socket contacts from front-release connectors (such as DT, DTM, DTP, DTV, DRB, DRCP, and STRIKE* connectors).

Configuration: Multi-use tool with a small hook on one end to remove the wedgelock, and a small screwdriver on the other end to push back the locking fingers and release the contact.

Material: Hardened & rust-proof stainless steel body, super handy terminal removal tool for replace or repair worn electrical connections , to let you separate the wires from their terminals without causing damage to either.

The flaring end of the tool facilitates the expansion of the cable providing easier insertion of "F" connectors

The insertion end makes "F" connector insertion fast and easy, even in cold weather

This tool is recommended for use on polyethylene jacketed cables and plenum cables, and is especially helpful when using tri-shield and quad-shield cables

VERSATILE USE: Compatible with nearly all AMP CPC pin connectors between contact sizes 16-20

Smooth built-in plunger makes removal of pins quick and easy

COMPACT SIZE: Only 3" in length for convenient storage

★【What You Get】: In this tool set, it include a 11 inch blue BNC extraction tool and a red 12 inch F extraction tool, a 7 inch blue termination tool and a small F connector removing tool total 4pcs tool for your work.

★【Long Handle Tool】: This 11 inch and 12 inch long hand tool are made of durable metal and plastic, ergonomic design, great used for remove BNC connector especially narrow places that are out of reach.

★【7 Inch Termination Tool】: Long life chrome finish, designed with solid spring steel ears, used for removal of cable termination locks.

3 pack of DB Pin insertion and extraction tools

1 Year Limited Your Cable Store Warranty

✔️If this doesn't solve your problem, please feel free to contact us by email. You don't need to return the product, we can give you a full refund.

✔️PURPOSE: JUYEER headphone plug extraction tool is built specifically to easily remove broken 3.5mm headphone plugs from jacks. It can be used on 3.5mm jacks found on phones, laptops and any other devices. You can solve your problem within 20 seconds.

✔️HOW TO USE: Insert the steel tube between the headphone jack and a broken plug. You may need to lightly tap it in. It should go in about the same length as the headphone plug. Normally 0.55inch. Pinch with fingers or pliers for better grip. With broken plug enclosed, pull to remove.

INSERTION & EXTRACTION: Perfect for inserting and extracting size 20 front release contacts made by most manufacturers

MAXIMUM COMPATIBILITY: Compatible with nearly all connectors with size 20 front release contacts

BRASS PROBES: Prevent damage to contacts making the tool highly durable

Warranty: Lifetime

D-Sub Pin Insertion and Extraction Tool

Tool to insert or extract D-Sub pins with ease

PRODUCT COMPOSITION: This headphone extraction tool kit includes two short and two long laser cutting mini stainless steel pipe. These stainless tubes have different thicknesses, slits and cutting angles which can handle a variety of different repair situations. Applicable to all models of mobile phones, pads and computers with 3.5mm headphone jack.

30 SECONDS EXTRACTION TOOL: You can use this headphone jack extraction tool to easily remove the broken headphone plug within 30 seconds. This headphone plug extraction tool will save you from spending 3 hours on a round trip to a professional repair store. Taking Care of Your Money! At least 20 bucks will be saved.

HOW TO USE: Use the short one first! Insert it into the headphone jack hole. Place the phone or pad upright and press the tube against the table. You'd better put a book underneath to prevent scars on the table. Gently downward to feel the extraction tool grab the broken headphone plug. Then tighten the end of the tube with hands or pliers and pull it out. If the broken plug is not all taken out, proceed with the long one headphone jack remover. Use the same method as above.

Please note: If you have any questions, please feel free to contact us (please attach product pictures), and we will provide you with a satisfactory after-sales solution. We hope to establish communication with you and provide you with a good shopping experience.

D-sub Connector removal tool, for easily pulling out the D-sub pin(MIL-DTL-24308, Harting 5A D SUB Connector, DB9 Connector, etc)

Groove design: the middle groove of the needle bar is designed to put the wire into the groove to protect the wire from damage

Quality material: 4-claw picker is made of quality metal and plastic,strong and sturdy, Anti-rust and strong grip,U-shaped IC extractor and PLCC IC chip puller,they’re all stainless body and covered with PVC insulting shell,small size,easy to carry,The test pencil is mainly composed of plastic and colloid,can be applied for a long time.

Design and practicality: 4-claw design of 4-claw picker can firmly grasp small objects such as fixing screws, and it is not easy to fall.The non-slip material of the U-shaped IC extractor and the labor-saving U-shaped design can reduce hand fatigue, saving effort.The small hook design of the PLCC IC chip puller can quickly pull out and install the IC conductor without being hurt.The electric tester can test whether there is electricity to avoid electric shock.

Package content: 4-piece professional picking tool set. you will get a 4-claw picker ,a U-shaped IC extractor,a PLCC IC chip puller and a test pencil. It is an indispensable tool for maintenance workers, students and teachers who need experiments.

Ideal for high-volume applications

Holds the F-connector for fast and reliable cable insertion

Precision-machined, high-carbon steel is hardened for long life

Mpn: KR-260

Country of manufacture: China

Manufacturer: Jonard Tools

Insert the hardened tip of the hex bolt to the inside of the door

Install your 3/4" or 19mm socket to your 1/2" impact wrench and engage

Within 3-5 seconds you will see the old SPR come out from the bottom

Pack of 3 Tool for RS232 Crimp type Contact Pin Use.

Item Comes with Red End for Pin Insertion and the White End for Extraction

This Pin Insertion And Extraction Tools Makes The Job Easier By Properly Setting Or Removing Typical Contact Pins From D-Sub Connectors

Price For: Each For Use With: Miniature Universal MATE-N-LOK, Miniature Rectangular, Commercial PIN 0.062 Contacts Tool Body Material: Plastic RoHS Compliant: NA

Contacts: M39029/58-360, M39029/57-354

Size: 22D contacts, Double-ended insertion & removal tool

Application connector: MIL-DTL-38999, MIL-DTL-55302/68 & /69, MIL-DTL-24308 (SIZE 22D 0NLY), MIL-DTL.83733 (SIZE 22D ONLY), & AS81714 (SIZE 22D ONLY), MIL-STD-1549

Price For: Each

Package dimensions: 19.68 cms L x 1.91 cms W x 1.91 cms H

Package quantity: 1

Product type: Precision Measuring

Model Number: 91067-1

Item Package Length: 6.49999999337"

Item Package Width: 3.399999996532"

<b>Price For:</b> Each<b>Order Unit:</b> Each 1 <b>For Use With:</b>: MX-150 Pin & Socket Crimp Terminals <b>SVHC:</b>: To Be Advised <b>Tool Body Material:</b>: -

Price is for 2-Pack of Pin-tool

Pin Insertion Tool On One End And The Extraction Tool On The Other

This Pin Insertion And Extraction Tools Makes The Job Easier By Properly Setting Or Removing Typical Contact Pins From D-Sub Connectors

0.3" Centers (Pitch)

Tool designed with grounding lug and lead straightener

Package Dimensions: 2.54 H x 8.89 L x 20.32 W (centimeters)

The package length is 16.51 centimeters

The package height is 1.524 centimeters

The package width is 8.89 centimeters

【TYPE】12 Inch F Connector Extraction Tool

【MATERIAL】Nickel-plated copper material,durable and long lasting.small and compact,easy to store.

【RANGE OF APPLICATION】For PTP-59 and PTP-59LR ,PCT International Model: TPG , Corning Gilbert model: GTT ,Signal Vision, Inc.

For male pins

Heavy duty

Product type: tool extraction