Best Compucableplususa in 2026

Pack of 3 Tool for RS232 Crimp type Contact Pin Use.

Item Comes with Red End for Pin Insertion and the White End for Extraction

This Pin Insertion And Extraction Tools Makes The Job Easier By Properly Setting Or Removing Typical Contact Pins From D-Sub Connectors

DB9 Serial Female 9 Pin Data Transfer Cable with wire ends; Straight Connectors—Wire Leads Connection attached with cable.

Tin-coated Bare wires end labeled with color and pin numbers for convenience of assembly or soldering.

25 feet industrial grade RS232 adapter cable with bare wire ends. Connect legacy DB9 serial communications devices to board.

DB9 Serial Female 9 Pin Data Transfer Cable with wire ends; Straight Connectors—Wire Leads Connection attached with cable.

Tin-coated Bare wires end labeled with color and pin numbers for convenience of assembly or soldering.

5 feet industrial grade RS232 adapter cable with bare wire ends. Connect legacy DB9 serial communications devices to board.

Change the Connector Gender on Devices or Cables.

Connect Two Serial Cables Together to Get A Longer Cable.

Serial Port Saver. Plugging In and Out Can Wear Out Connectors. Add This Adapter On to Avoid Connector Wear Out.

IMPROVING 3D PRINTING PROJECTS: Using 3D printers lets you create amazing projects. Innovative 3D printing tools like Virtjoule Heat-Set Insert Tips allow you to set threaded brass inserts into plastic to increase the strength of your part and also help you assemble and disassemble projects multiple times. These soldering tips, compatible with Hakko FX-888D and Weller SP40NKUS solder irons, make the job easy. With their square shoulder and slick finish, inserts won't stick on the tool and pull out.

OPTIMIZED SLIM PROFILE DESIGN: We originally created these long-shank tips to be compatible with the Hakko FX-888D iron. This design allows you to reach deeper into 3D-printer parts and tight corners without touching the side of your 3D-printed or injection molded part. The hot iron heats the tip and the brass insert, allowing it to melt into the piece. When set, the iron pulls out cleanly without sticking. A normal conical shape tip will often stick to the insert and pull it back out, ruining the project.

ONE SET, DIFFERENT TIP SIZES: Tip sizes include M2, M2.5, M3, M4, and M5. M2.5 is a popular hole size for Raspberry Pi circuit boards. M3 is a popular size for Arduino circuit boards. Our meticulously crafted soldering tips are smooth, and the edges are perfectly rounded, making a very slick slip between the tip and a brass insert.

DRK12B Removal Tool designed according to MIL-C-81969/19-02 REV.B ; DRK16B Removal Tool designed according to M81969/19-01 REV.8 ; DRK20B Removal Tool designed according to MIL-C-81969/19-06 REV.B;

DAK12B Installing Tool designed according to MIL-C-81969/17-05 REV.B ; DAK16B Installing Tool designed according to MIL-C-81969/17-04 REV.8 ; DAK20B Installing Tool designed according to MIL-C-81969/17-03 REV.B;

Applied to remove or install MIL series and some of NON-MIL round contacts without any damages to the electric connectors;

The 60W 110V plug-and-play soldering iron with LED indicator is designed with upgraded

Soldering suck made from aluminum alloy and plastic material is light weighted, and has powerful

6pcs of double-sided assist tools to meet the welding operation requirements of press, cutting,

Applications: The ET-01 removal tool is designed to be used to remove individual Deutsch size 16 solid and stamped and formed pins and socket contacts from front-release connectors (such as DT, DTM, DTP, DTV, DRB, DRCP, and STRIKE* connectors).

Configuration: Multi-use tool with a small hook on one end to remove the wedgelock, and a small screwdriver on the other end to push back the locking fingers and release the contact.

Material: Hardened & rust-proof stainless steel body, super handy terminal removal tool for replace or repair worn electrical connections , to let you separate the wires from their terminals without causing damage to either.

SPECIAL DESIGN: Designed to extract internal components from DIP Sockets as well as LSI, MSI, and SSI Devices with 8-24 pins

UNIQUE HOOKS: Firmly grasp chips without damaging them

INSULATED HOUSING: Prevents accidental discharge to IC components

Price For: Each For Use With: Anderson Powerpole & Multipole Connectors & Terminals Tool Body Material: Steel RoHS Compliant: NA

The flaring end of the tool facilitates the expansion of the cable providing easier insertion of "F" connectors

The insertion end makes "F" connector insertion fast and easy, even in cold weather

This tool is recommended for use on polyethylene jacketed cables and plenum cables, and is especially helpful when using tri-shield and quad-shield cables

VERSATILE USE: Compatible with nearly all AMP CPC pin connectors between contact sizes 16-20

Smooth built-in plunger makes removal of pins quick and easy

COMPACT SIZE: Only 3" in length for convenient storage

3 pack of DB Pin insertion and extraction tools

1 Year Limited Your Cable Store Warranty

★【What You Get】: In this tool set, it include a 11 inch blue BNC extraction tool and a red 12 inch F extraction tool, a 7 inch blue termination tool and a small F connector removing tool total 4pcs tool for your work.

★【Long Handle Tool】: This 11 inch and 12 inch long hand tool are made of durable metal and plastic, ergonomic design, great used for remove BNC connector especially narrow places that are out of reach.

★【7 Inch Termination Tool】: Long life chrome finish, designed with solid spring steel ears, used for removal of cable termination locks.

✔️If this doesn't solve your problem, please feel free to contact us by email. You don't need to return the product, we can give you a full refund.

✔️PURPOSE: JUYEER headphone plug extraction tool is built specifically to easily remove broken 3.5mm headphone plugs from jacks. It can be used on 3.5mm jacks found on phones, laptops and any other devices. You can solve your problem within 20 seconds.

✔️HOW TO USE: Insert the steel tube between the headphone jack and a broken plug. You may need to lightly tap it in. It should go in about the same length as the headphone plug. Normally 0.55inch. Pinch with fingers or pliers for better grip. With broken plug enclosed, pull to remove.

INSERTION & EXTRACTION: Perfect for inserting and extracting size 20 front release contacts made by most manufacturers

MAXIMUM COMPATIBILITY: Compatible with nearly all connectors with size 20 front release contacts

BRASS PROBES: Prevent damage to contacts making the tool highly durable

PRODUCT COMPOSITION: This headphone extraction tool kit includes two short and two long laser cutting mini stainless steel pipe. These stainless tubes have different thicknesses, slits and cutting angles which can handle a variety of different repair situations. Applicable to all models of mobile phones, pads and computers with 3.5mm headphone jack.

30 SECONDS EXTRACTION TOOL: You can use this headphone jack extraction tool to easily remove the broken headphone plug within 30 seconds. This headphone plug extraction tool will save you from spending 3 hours on a round trip to a professional repair store. Taking Care of Your Money! At least 20 bucks will be saved.

HOW TO USE: Use the short one first! Insert it into the headphone jack hole. Place the phone or pad upright and press the tube against the table. You'd better put a book underneath to prevent scars on the table. Gently downward to feel the extraction tool grab the broken headphone plug. Then tighten the end of the tube with hands or pliers and pull it out. If the broken plug is not all taken out, proceed with the long one headphone jack remover. Use the same method as above.

Warranty: Lifetime

D-Sub Pin Insertion and Extraction Tool

Tool to insert or extract D-Sub pins with ease

Please note: If you have any questions, please feel free to contact us (please attach product pictures), and we will provide you with a satisfactory after-sales solution. We hope to establish communication with you and provide you with a good shopping experience.

D-sub Connector removal tool, for easily pulling out the D-sub pin(MIL-DTL-24308, Harting 5A D SUB Connector, DB9 Connector, etc)

Groove design: the middle groove of the needle bar is designed to put the wire into the groove to protect the wire from damage

🍁COMPATIBLE WITH ALL SHOP VACS: Our unique adapters connect this extraction tool to all brands’ shop vacs from 2.5 gallon to 16 gallon.1-1/4” Adapter fits vac in 2.5-5 gallon. 1-7/8” adapter fits shop vac in 5-9 gallon, but for Rigid vac from 3-9 gallon. 2-1/2” Adapter fits vac in 12-16 gallon. Don’t worry and needn’t check whether this tool fit my shop vac or not, just pick up it today. This universal extractor tool works with any shop vacuum cleaner you already have

🍁UNBREAKABLE SEE-THROUGH HEAD: This clear head is made from special premium materials and will not breakable even your automobile roll on it. Don’t worry to drop it anywhere, it is unbreakable! The transparent head lets you view the whole cleaning process and effect, see the dirt and impurities being cleaned. This small 3-1/2” width nozzle extract stains from stairs, car interiors, upholstery, mats, boats as well as all those other hard to reach place

🍁 EASY TO INSTALL & REUSE: Our unique adapters connect the tool to both hose cuff and extension wand of shop vac. Just plug in, turn shop vac to an extractor immediately. The three adapters are no inside threads, no need destroy your hose cuff, your hose cuff could still fit original accessories of your shop vac. We developed this extractor tool to ensure you clean up with improved accuracy and efficiency in your house, in your car, and everywhere you need a little fine-tuned detailing

Quality material: 4-claw picker is made of quality metal and plastic,strong and sturdy, Anti-rust and strong grip,U-shaped IC extractor and PLCC IC chip puller,they’re all stainless body and covered with PVC insulting shell,small size,easy to carry,The test pencil is mainly composed of plastic and colloid,can be applied for a long time.

Design and practicality: 4-claw design of 4-claw picker can firmly grasp small objects such as fixing screws, and it is not easy to fall.The non-slip material of the U-shaped IC extractor and the labor-saving U-shaped design can reduce hand fatigue, saving effort.The small hook design of the PLCC IC chip puller can quickly pull out and install the IC conductor without being hurt.The electric tester can test whether there is electricity to avoid electric shock.

Package content: 4-piece professional picking tool set. you will get a 4-claw picker ,a U-shaped IC extractor,a PLCC IC chip puller and a test pencil. It is an indispensable tool for maintenance workers, students and teachers who need experiments.

Designed for removing contacts in MIL-DTL-26482 MIL-DTL-26500 MIL-DTL-26518 AS50151(AS34001- AS34121) AS81703 series electronic connectors

DRK20B DRK16B DRK12B apply to contact size 20 16 12 respectively

Removal tools contain stainless steel nickel plating probes and color oxidation handles,more stronger and wearproof,it is durable and has a good appreance

Mpn: KR-260

Country of manufacture: China

Manufacturer: Jonard Tools

【ST5229 Package List】1PC DRK-T210250 and DRK-T310360.

【Extraction Tools Kits Size】DRK-T210250 (ID: 2.1mm/0.082", OD: 2.5mm/0.098"); DRK-T310360 (ID:3.1mm/0.12", OD: 3.6mm/0.14");

【DRK-T310360】For MOLEX Standard .093" Series Male&Female Contact；JST L&LL Series Male&Female Contact.

【Deutsch Connectors Professional Terminal Removal Tool Kit】For 12#16#20# solid contacts and stamped contacts. Exquisite workmanship, very practical, easy to operate, help you improve work efficiency, comes with a storage bag, carry Convenient. Widely Suitable for DT DTP DTM series, AEC, DTV, DRB, HD other series connectors .

【SIZE 12 Contacts Extraction Tools】DRK-12DTP max wire outer diameter 3.7mm; 114010 max wire outer diameter 5.13mm;

【SIZE 16 Contacts Extraction Tools】DRK-16DT max wire outer diameter 2.9mm; 0411-310-1605 max wire outer diameter 3.4mm; 0411-291-1405 max wire outer diameter 3.81mm;

Insert the hardened tip of the hex bolt to the inside of the door

Install your 3/4" or 19mm socket to your 1/2" impact wrench and engage

Within 3-5 seconds you will see the old SPR come out from the bottom

MULTIFUNCTION TOOL: This tool was constructed to easily insert and extract fiber optic connectors, particularly in high-density patch panels. It is compatible with LC and SC simplex and duplex connectors as well as MU, MT-RJ, and similar connectors.

HEAVY-DUTY & CONVENIENT: This tool was engineered with ergonomic cushioned handles. The spring-rigged and striated jaw allows for a powerful nonslip grip on connectors. Its slim design fits between other installed connectors for easy access.

SAFE ACCESS TOOL: Safety is our top priority when it comes to tools. Our device is safer than a knife or scissors. Unlike a traditional knife or pair of scissors, this puller is designed to protect your hands from blade-related injuries.

Price For: Each

Pack of 3 Tool for RS232 Crimp type Contact Pin Use.

Item Comes with Red End for Pin Insertion and the White End for Extraction

This Pin Insertion And Extraction Tools Makes The Job Easier By Properly Setting Or Removing Typical Contact Pins From D-Sub Connectors