Best Bluefire Brazing Rods in 2026

Includes (4) brazing rods .050 inch x 1/8 inch x 20 inches Stay-Silv 15% Flat Brazing Rods

Uses for many copper-to-copper applications where moderate fit-up can be maintained and brazing temperature is not critical.

Solidus Temperature: 1190°F, 643°C | Liquidus Temperature: 1475°F, 802°C | Recommended Brazing Range: 1300-1500°F, 705-815°C

Easy flow brazing rod makes it simple to braze aluminum and zinc based metals with an oxygen acetylene or propane torch set up

Great for repairs on irrigation pipes, carburetor bowls, aluminum boats, camper covers, lawn mower housings and casings

Balanced zinc and copper alloy

Package Weight: 0.01 pounds

Brinnell hardness: 100

Working temp: 700-750 degrees

Low temperature, self-fluxing rod for use on aluminum and magnesium

700°F melting temperature

These aluminum rods come in an seven pack and are 18-1/8"

Material: The package includes 20PCS 2.0mm cooper brazing rods BCuP-2 brass welding rod

Standard: The copper welding rods kit conforms to AWS A5.8

Advantage: The low temperature phosphor copper welding rod is easy to install and remove. Good fluidity during welding, can flow into small space. Low metling point 640-770℃, good fluidity during welding, molten metal can flow to small gaps

28 Stick Tube, Harris Safety Silva 15

15% Silver Solder Brazing Alloy

Each Stick Measures . 050" X 1/8" X 19 3/4" Long

【MATERIAL】 21 Rods 1/16" x 16.93" aluminum brazing rods are included in the package. The chemical composition of the brazing rods: Si 12%, Mg≤0.10%, Fe≤0.80%, Cu≤0.03%, Zn≤0.20%, Mn≤0.15%, AL balance. Welding flux core 18%.

【ADVANTAGES】Brazing temperature range: 716-752°F. Solidus: 716°F, Liquidus: 752°F. Tensile Strength ( RM): 130N/mm². The aluminum soldering rods has good fluidity during welding, strong caulking, and can flow into small spaces.

【PACKAGING】Cloud Fire welding rod packaging has been optimized, and it is packaged in a sealed tube, which can effectively reduce the occurrence of moisture and other events compared with other packaging. The caps at both ends can be opened for easy storage and use.

It can also be used for overlay and build-up applications

Dilution from the casting influences the mechanical properties of the metal

Due to the high nickel content, the welds are readily machinable

Fluxed coated 56% Silver brazing rods, 1/16" Core. (3 Sticks)

For general purpose brazing of ferrous and non-ferrous alloys excluding aluminum.

For joining and repairing of Copper, Brass, Steel, Stainless Steel and Cast Iron.

High-quality materials: 100% brand new, made of high-quality copper, smooth surface, easy to form, no cracks, durable, economical and practical.

The number of copper wires: a total of 4 wires, thickness and diameter: 0.5mm, 0.7mm, 1.0mm, 1.5mm bare copper wire jewelry beaded wire. The sturdy structure (4 pieces) can be used for a long time.

Copper wire characteristics: low melting point, easy to melt and weld. Commonly used in gold and silver welding, K gold welding, silver welding, brazing, etc.

Occupational Health & Safety

Country of Manifacturer: United States

Manufacturer: Harris

Sufficient Quantity to Use: the package comes with 40 pieces of brass rods for knife handles, enough to satisfy your crafting or repairing demands, bringing you much convenience

Appropriate Size for Processing: designed with a length of approx. 25 cm/ 9.85 inches and a diameter of approx. 2 mm/ 0.08 inches, the knife making handle pins are suitable for you to grip, store and carry around

Easy for Welding: the brazing rod is an ideal material for you to do welding work, such as sculpture welding, model welding, circuit board welding and so on, whose melting point is 2190 degrees Fahrenheit, serving as a nice helper for you

15% Silver Bearing: USA AWS A5.8 Class: BCuP-5 brazing alloy rods. Contents: Silver (Ag) 14.5-15.5%; Phosphor (P): 4.8-5.2%; Copper (Cu): Rest. For the best results, recommend to be use with Bluefire JFB-102S brazing flux.

Valued Pack: Each tube contains 20 sticks of 14" long brazing rods, total 0.5 (1/2) pound in weight (Minor weight difference might exist in each tube, which is normal). GREAT SAVING!

Best Performances: Solidus Temperature: 1193°F / 645°C, Liquidus Temperature: 1472°F / 800°C, Recommended Joint Clearance: 0.002"/0.006", Fluidity Rating: 3. The 15% silver contents greatly improve the performance of the brazing alloys, providing better wettability, higher strength and lower melting temperature. Consequently, making the welding fluids capable to flow deeply into the small brazing gap, providing higher strength and toughness of the welding joint, and reducing the brazing time.

High strength alloy used for gas brazing low carbon and low alloy steels

Used in applications require high tensile strength, greater than 45,000 psi

High silicon and manganese content eliminates the need for flux

The product is 10PK 1/8"x18" ALU Rod

Easy to use

The product is manufactured in China

Material: The package includes 20PCS 5% Silver Brazing Rods BCuP-3.Silver (Ag) 4.8-5.2%; Phosphor (P): 6.5-7.0%; Copper (Cu): Rest. For the best results,

Standard: The BCuP-3 silver brazing rod containing 5% silver, is equivalent to the American standard AWS BCuP-3 national standard BCu88PAg and L205. It has certain plasticity and is suitable for welding of copper and its alloy joints that cannot maintain a tight fit. Melting point 645-1193 degrees Celsius.

Advantage: The low temperature phosphor silver welding rod is easy to install and remove. Good fluidity during welding, can flow into small space. Low metling point 718-816℃, good fluidity during welding, molten metal can flow to small gaps

【APPLICATION】 Versatile and can be used for a variety of welding applications as well as DIY projects such as making whirligigs. Brass brazing rods is used for welding copper alloy, carbon steel and alloy steel. It can also be used as an inlaid carbide tool or DIY decorate. Note: Copper-zinc alloys are not suitable for argon arc welding.

【MATERIAL】 25 Rods 1/16" X 9.84" brass brazing wire are included in the package. The chemical composition of the brazing rods: Cu 59%~61%, Si 0.15%~0.35%, Sn 0.8%-1.2%, Pb 105mg/kg, Zn balance. Note: Welding needs to be done in an open place or outdoors. Please wear a protective mask to avoid damage from zinc gas.

【ADVANTAGES】Brazing temperature range: 1634-1661°F. Solidus: 1634°F, Liquidus: 1661°F. Tensile Strength: 130N/mm². HB: 100 N/mm2. Elongation%: 25%. Brass rods contain a small amount of tin and silicon, tin can improve the fluidity of the welding wire, silicon can effectively control the evaporation of zinc, eliminate pores, and get a good weld.

Tensile Strength: Up to 63,000 PSI

Melting Point: 1570° F

Solidification: 1545° F

【Value Pack】 Each tube contains 40 pcs of bare solid brass brazing alloy rods, each rod is 1/16" in diameter and 14" in length. Total 1/2 lb or half pound valued pack. Great saving!

【Easy Flow Brazing Alloy】 Optimized formula of 59-61% Copper, 0.8-1.2% Sn Tin, 0.15-0.35% Silicon, Rest for Zinc. Easy flow brazing rod makes it simple to braze aluminum and zinc based metals with an oxygen acetylene or propane gas welding torch set up;

【All-Purpose Filler Metal】Great for repairs on irrigation pipes, carburetor bowls, aluminum boats, camper covers, lawn mower housings and casings. This brass alloy is suitable to braze brass, bronze, low carbon steel, cast iron, nickel alloys and hard alloys parts, High Joint Tensile Strength up to 37700 PSI;

Fluxed low fuming bronze brazing rod is a high quality, low fuming bronze brazing rod with flux

Formulated for high tensile strength and ductility

Smooth flowing

All-in-one Flux Cored Aluminum Brazing Alloy

Low temperature self-fluxing alloy ideal for brazing aluminum to aluminum or aluminum to copper.

Cadmium free zinc-aluminum brazing filler metal.

Material: The package includes 20PCS Flat Bar cooper brazing rods BCuP-2 brass welding rod

Standard: The copper welding rods kit conforms to AWS A5.8

Advantage: The low temperature phosphor copper welding rod is easy to install and remove. Good fluidity during welding, can flow into small space. Low metling point 640-770℃, good fluidity during welding, molten metal can flow to small gaps

Superior Performance - Works at much lower temperatures (728 °F/387°C) than most comparable brazing alloy products, allowing you to repair and fabricate more aluminum and other non-ferrous parts.

Perfect Welding Results: strong weldability and corrosion resistance, high thermal conductivity, high electrical conductivity and excellent machinability.

Scope of Application:Works with aluminum, aluminum alloy, steel and iron, die-cast, bronze, nickel, titanium, zinc, copper, brass & most non-ferrous (non-magnetic) metals. Allowing you to apply quickly & easily with any handheld torch – Oxyacetylene, Mapp, Map/Pro or Propane torch like the best metalwork enthusiasts do.

Price For: Each Tensile Strength (PSI): - Type: Flux Coated Contents: 56% Silver, 22% Copper, 17% Zinc, 5% Tin Container: Tube Application: For Ferrous and Non Ferrous Alloys Good for Stainless Steel Includes: - Item: Brazing Alloy Rod Material: Safety-Silv-56 Flux Coated Dia. (In.): 1/16 Length (In.): 18 Brazing Range (F): 1145 to 1205 Standards: AWS A5.8, Bag-7, NSF 51

Country of Origin (subject to change): United States

Upgraded Full Metal Cover Version, change old design's plastic knob to solid brass constructed knob.Better Performance, Thicker and Heavier for durability.Strong pencil flame to provide both working precision and optimized heat output, Max working temperature up to 1350℃, meets the most common needs for both professionals and DIY fans.

Smart sized, Easy to be used in any spaces, Manual ignition, torch run off MAPP, MAP Pro and Propane With recommended BLUEFIRE MAPP or other quality welding gas, this torch can easily handle soft soldering tasks, brazing copper tubing, thawing pipes, remove paint and tiles, wood working, melting, heating, and many other home and commercial purposes.Perfect tool for plumbing, air-conditioning, automobile repair and body works, Jewelry and beads making, DIY tasks, crafts and hobbies, and etc.

No Flux Needed:No additional flux is needed. BLUEFIRE brazing coil can be used directly with propane torch, which will save you a lot of money on extra flux.In addition, the coil design of brazing rods is more convenient to carry than the rod design, you can use the brazing rods coil in your pocket for repair work anywhere and whenever it's needed. A great and thoughtful design!

The welding rods has nice electrical properties and high frequency insulation from humidity, not easy to wear or age.

Good mechanical properties, the hot plasticity, the cold plastic, good machinability.

Easy to use.