Best Fox Alloy in 2026

Material: The package includes 20PCS 2.0mm cooper brazing rods BCuP-2 brass welding rod

Standard: The copper welding rods kit conforms to AWS A5.8

Advantage: The low temperature phosphor copper welding rod is easy to install and remove. Good fluidity during welding, can flow into small space. Low metling point 640-770℃, good fluidity during welding, molten metal can flow to small gaps

2-lb spool 0.030" gas-less E71T flux-cored ( FCW ) mild steel MIG welding wire with sturdy packaging

Welding Wire E71T-GS conforms to AWS A5.20 (E71T-GS), AWS A5.36 (E71T14S-AZ-CS3), ISO 17632-A (T42 Z Z V N 1)

Flux core welding wire E71T-GS is self shield, no shielding gas needed, single-pass fillet and lap welding, all positional, low welding fume, minimum spatter,Smooth arc action,High feedability,Filler Metal welding wire is easy to weld in indoor and outdoor

10-lbs spool 0.035" gas-less E71T flux-cored ( FCW ) mild steel MIG welding wire with sturdy packaging Welding Wire E71T-GS conforms to AWS A5.20 (E71T-GS), AWS A5.36 (E71T14S-AZ-CS3), ISO 17632-A (T42 Z Z V N 1)

Welding Wire E71T-GS conforms to AWS A5.20 (E71T-GS), AWS A5.36 (E71T14S-AZ-CS3), ISO 17632-A (T42 Z Z V N 1)

Flux core welding wire E71T-GS is self shield, no shielding gas needed, single-pass fillet and lap welding, all positional, low welding fume, minimum spatter,Smooth arc action,High feedability,Filler Metal welding wire is easy to weld in indoor and outdoor

Material: The Solid Welding Wire is Gas shielding needed cooper coated Mig wires for mild steel ER70S-6

Standard: Welding Wire ER70S-6 conforms to AWS A5.18 (ER70S-6),EN ISO14341-A (G 38 2 C1/M21 Z 3Si1)

Advantage: ER70S-6 mig wire provides excellent usability with stable arc, less spatter, good bead appearance. The weld metal has excellent mechanical performance and less sensitive to pores

Material: Brand New & High-Quality Copper. Perfect match and Good Choice for Direct replacement of original parts;

Standard: Strict quality control standards, and you will receive a package containing 30 pieces of 0.030 inch contact tips;

Advantage: Highly durable with quality copper, wear resistant, no clogging, can resist high temperature, also have good electricity conductivity, longer life span;

Material: 2% Lanthanum blue tungsten electrode ground finish WL20

Standard: Tungsten Electrodes WL20 conforms to: AWS A5.12 WL20; ISO 6848

Advantage: Easy arcing & more stable arc at lower current, longer life span than WT20, good at pipeline welding.

Material: 2% Thorium red tungsten electrodes ground finish WT20

Standard: Tungsten Electrodes WT20 conforms to: AWS A5.12; ISO 6848

Advantage: 2% Thoriated makes arcing easier, More stable arc at overload current, Longer life span, Better conductivity

Material: Brand New & High-Quality Copper. Perfect match and Good Choice for Direct replacement of original parts;

Standard: Strict quality control standards, and you will receive a package containing 30 pieces of 0.035 inch contact tips;

Advantage: Highly durable with quality copper, wear resistant, no clogging, can resist high temperature, also have good electricity conductivity, longer life span;

Material: The package includes 20PCS 5% Silver Brazing Rods BCuP-3.Silver (Ag) 4.8-5.2%; Phosphor (P): 6.5-7.0%; Copper (Cu): Rest. For the best results,

Standard: The BCuP-3 silver brazing rod containing 5% silver, is equivalent to the American standard AWS BCuP-3 national standard BCu88PAg and L205. It has certain plasticity and is suitable for welding of copper and its alloy joints that cannot maintain a tight fit. Melting point 645-1193 degrees Celsius.

Advantage: The low temperature phosphor silver welding rod is easy to install and remove. Good fluidity during welding, can flow into small space. Low metling point 718-816℃, good fluidity during welding, molten metal can flow to small gaps

Material: The package includes ENiFe-CI 5pcs 1/8'' Welding Electrode Rods

Standard: ENiFe-CI electrode conforms to : AWS A5.15 ENiFe-CI EN ISO 1071: E C NiFe-CI 1 3 GB/T10044 EZNiFe-1

Advantage: ENiFe-CI nickel-iron type electrode designed to weld normal grades cast irons and joint them to steel. It has very good current-carrying capacity and the weld metal is stronger and more resistant to solidification cracking than other nickel type electrodes

100% Cowhide Leather: This Welding Apron is made of heavy duty genuine cowhide leather, heat flame resistant;

43.7 Inches LONG Protection: This extral long work shop apron can full protect you from upper chest to knees, so it's pefect safety apparel for blacksmith / woodwork / home improvement / BBQ / fireplace / heavy duty work / welders men & women

Kevlar thread and multifuncition: This heavy duty welding apron use Kevlar stitching, is fire retardant and won’t melt or stretch, and has 6 pockets for storage tools and work accessories;

Material: The package includes 20PCS 15% Silver Brazing Rods BCuP-5.Silver (Ag) 14.8-15.2%; Phosphor (P): 6.5-7.0%; Copper (Cu): Rest. For the best results.

Standard: The BCuP-5 silver brazing rod containing 15% silver, is equivalent to the American standard AWS BCuP-5 national standard BCu88PAg and L205. It has certain plasticity and is suitable for welding of copper and its alloy joints that cannot maintain a tight fit. Melting point 645-815 degrees Celsius.

Advantage: The low temperature phosphor silver welding rod is easy to install and remove. Good fluidity during welding, can flow into small space. Low metling point 704-816℃, good fluidity during welding, molten metal can flow to small gaps

Material: ER308L is an A super low carbon Stainless welding Rod£¬The ER308L stainless steel TIG welding rods Chemical composition %: C=0.20, Si=05, Mn=1.95, P=0.012, S=0.008, Cr=20.0, Ni=10.1, P=0.012, MO=0.011.

Material: This blue welding hood hat is made of retardant washable fabric canvas, has nylon absorbent lining;

Full Protection: This canvas hood is with neck shoulder drap,the welding hood can protect your head and neck from flame,spatter and splash;

One size fits more: This welding torching hood has Velcro-style opening chin to chest, easy to fit and remove, which help the user to get a better fit;

Material: The package includes ENi-CI 5pcs 1/8'' Welding Electrode Rods

Standard: ENi-CI Ni99 electrode conforms to : AWS A5.15 ENi-CI EN ISO 1071: E C Ni-CI 1 GB/T10044 EZNi-1

Advantage: ENi-C pure nickle electrode designed to weld normal grades cast irons. The weld metal is soft and easily machinable, deposition is performed on cold or slightly preheated material

4Pcs Welding tools： In this kit, You will get 4Pcs Welding tools: A pair Welding Leather Gloves,10 Inch Scratch wire brush Slag Removal Tool . Including 1 piece of wire brush, 1 piece of welding hammer and 1 piece welding plier, WIth the 4pcs welding tools Which are easy to remove and clean corrosion and slag from most of your welds, Welding chipping hammer and steel wire brush, makes it easy to clean and remove slag from all your welds

A Pair Welding Gloves： The welding leather Gloves are made from 1.5mm thick and soft leather which is heat resistant, wear-resistant, puncture resistant, cut resistant, oil resistant. Reinforced double leather stitching and high strength sewing on the finger, palm, elbow & back of the hand which is not easy to fall off

Scratch Wire Brush :the wire brush id Made of Copper plated steel wire, The wire brush has a long brush body and a narrow brush surface, which can be used for cleaning, rust removal and cleaning of various gaps

Material: The package includes 20PCS Flat Bar cooper brazing rods BCuP-2 brass welding rod

Standard: The copper welding rods kit conforms to AWS A5.8

Advantage: The low temperature phosphor copper welding rod is easy to install and remove. Good fluidity during welding, can flow into small space. Low metling point 640-770℃, good fluidity during welding, molten metal can flow to small gaps

Kester 24-6040-0027 - (1) Spool, 1 Pound per Spool

Diameter: 0.031" Inch (0.80mm)

Alloy: 60% Tin / 40% Lead (Product contains Halogen)

Lead free (RoHS Compliant)

Removes tip oxidation

No-Clean compatible formulation

Soldering Kit with Diagonal Wire Cutter - widely used for soldering projects, home DIY soldering, appliance, electrical and electronics repairs, circuit board welding, other fixing jobs, hobby crafts, etc

Premium Quality – high quality solder iron tool, soldering iron stand with sponge, and all other accessories; reliable adjustable soldering iron with heat-resistant cap and grip and with 5pcs soldering iron tips

Bonus Accessories – desoldering pump, tweezers, insulating tapes, solder paste, wire cutter, heat shrink tubing, pen-shaped screwdriver, wires, mini screwdrivers, mini PCB, etc., and a downloadable ebook

Soldering Iron Kit for many applications – necessary tools for soldering projects, home DIY fixing jobs, electrical, electronics and appliance repairs, circuit board welding, for home DIY hobbyist in crafts and jewelry making and many more uses

Premium Quality Components with safety features – high quality soldering iron, stand and all other accessories; soldering iron with adjustable temperature knob (200℃ - 450℃), 5pcs replaceable tips, heat-resistant cap and grip for maximum protection

Bonus Accessories – more than 15 extra items such as desoldering pump/solder sucker, tin wire solder tube, tweezers, mini wire stripper, mini screwdrivers, mini PCB, heat shrink tubes and more plus a downloadable ebook

The solder sucker has a large capacity cylinder and silicone tube at the tip for improved suction

[Uses] For solder removal of substrates

Nozzle is heat-resistant silicone tube that will not damage the object

Size: length 186 x width 84 mm.

Applicable models: FX-600, FX-601, PRESTO, DASH

Weight: 380 g.

Easy-To-Use Adjustable Temperature Control Built Into The Handle

Easy-To-Clean Solder Recovery Chamber Minimizes Maintenance And Reduces Waste

Fast Release Tool For The Quick-Change Nozzle System

SMOOTH SURFACE:These brass rods have a smooth surface and are wrapped in professional metal wrapping paper. Even long-term storage, the brass rods are as bright as the new ones.

EXACT SIZE: 30cm/12 inch in length ，1/8 inch in diameter

FEATURES: The 1/8 brass round rod is a free cutting brass . It can be easily soldered and brazed and provides good resistance to corrosion.

WHEN YOU NEED A HAND: Place the flexible and adjustable Quadhands gooseneck arms anywhere on the magnetic plate. Clamp a project (circuits, jewelry, hobby model) securely in place so you can solder, paint or repair with precision. Work smarter not harder!

STRONG MAGNETIC ARMS: Freely connect 4 magnetic, adjustable 16” and 8” arms to the plate. Clip your project to the 360° rotating alligator clamps and lock using thumb nuts. Then move, rearrange and position to keep them steady so you work with accuracy.

WEIGHTED BASE: Rubber feet keep the large powder coated steel 6” x 9” heavy base from sliding and stable. Wherever you stick the arms - the base provides a strong magnetic attraction, making sure your project stays put so you work with precision!

WHEN YOU NEED A HAND: Bolt your PanaVise (not included) to the mount then place the flexible, adjustable gooseneck arms anywhere on the magnetic plate. Clamp a project (circuit board) to solder, paint or repair with precision. Work smarter not harder!

STRONG MAGNETIC ARMS: Mount the PanaVise (hardware included) then clip the project to the 360° rotating alligator clamps with locking thumb nuts. Connect, move and position 4 magnetic, adjustable arms to the steel base so you work with ease.

WEIGHTED BASE: Rubber feet keep the extra large powder coated steel 4.6 lb heavy base from sliding and stable. Wherever you stick the arms - the oval base provides a strong magnetic attraction, making sure your project stays put so you work with accuracy!

WHEN YOU NEED A HAND: Place the flexible and adjustable Quadhands gooseneck arms anywhere on the XL magnetic plate. Clamp a large project (circuit board, jewelry, drone) securely in place to solder, paint or repair with precision. Work smarter not harder!

STRONG MAGNETIC ARMS: Freely connect 5 magnetic, adjustable 16”/12”/8” arms to the plate. Clip your project to the 360° rotating alligator clamps and lock using thumb nuts. Move, rearrange and position to keep them steady so you can work with accuracy.

WEIGHTED BASE: Rubber feet keep the extra large powder coated steel 8.5” x 11” heavy base from sliding and stable. Wherever you stick the arms - the base provides a strong magnetic attraction, making sure your project stays put so you work with accuracy!

【Multi-Function】Silicone work mat built-in scale ruler (0 ~38 cm/0~15 in), 124 screws position and 3 pcs magnetic parts areas and 18 notches to classify precision parts,which improve your work efficiency and make the maintenance platform cleaner and tidy.

【Heat Insulation】Heat insulation mat can resist the temperature as high as 500℃ and is anti-corrosive also,Its texture is soft, supports high temperature soldering work directly, which can protect maintenance platform from damage.

【Anti-Slip】Both surface and back side are adopting the anti-slip design, it won't slide around on your counter or station, and its attractive design keeps small parts from sliding, which prevent them from losting or misplacing.

4.5 ft of Low melting point alloy for IC removal.

Easily remove ICs without a Hot Air Station or Hot Air Gun.

Comes in convenient 6.5" lengths with instructions.