Best 247 Solder in 2026

4.5 ft of Low melting point alloy for IC removal.

Easily remove ICs without a Hot Air Station or Hot Air Gun.

Comes in convenient 6.5" lengths with instructions.

2.7 ft of Low melting point alloy for IC removal

Easily remove ICs without a Hot Air Station or Hot Air Gun

Comes in convenient 6.5" lengths with instructions

Kester 24-6040-0027 - (1) Spool, 1 Pound per Spool

Diameter: 0.031" Inch (0.80mm)

Alloy: 60% Tin / 40% Lead (Product contains Halogen)

The Ideal Flux For Electrical And Electronic Repairs

Contains 2 Ounce In A "Hockey Puck" Jar

Formulated For Use With Tin/Lead And Lead-Free Alloys

Lead free (RoHS Compliant)

Removes tip oxidation

No-Clean compatible formulation

√ Tin Lead Solder Wire: High Quality Rosin Core Solder Wire

√ Parameters: solder wire Tin 63%- Lead 37% (Sn63-Pb37)

√ Flux content 1.8%，electrical soldering wire dia is 0.8mm (0.0315inch)，gross weight 50gram (0.11lbs),good size for pocket

(1) Kester 24-6040-0061 Spool, 1 Pound per Spool

Diameter - 0.062"Inch (1.50mm)

60% Tin / 40% Lead (Product contains Halogen)

(1) Kester 24-6337-0027 Spool, 1 Pound per Spool

Diameter - 0.031"Inch (0.80mm)

63% Tin / 37% Lead (Product contains Halogen)

Specially repackaged by TekLine Supply

1-Ounce pocket size pack contains approx 27 feet of solder!

67/37 Tin/Lead is most common for electronics work

Easy-To-Use Adjustable Temperature Control Built Into The Handle

Easy-To-Clean Solder Recovery Chamber Minimizes Maintenance And Reduces Waste

Fast Release Tool For The Quick-Change Nozzle System

The solder sucker has a large capacity cylinder and silicone tube at the tip for improved suction

[Uses] For solder removal of substrates

Nozzle is heat-resistant silicone tube that will not damage the object

Size: length 186 x width 84 mm.

Applicable models: FX-600, FX-601, PRESTO, DASH

Weight: 380 g.

Superior fluxing ability

Instant wetting

After soldering, the rosin residue is non corrosive, non conducting, moisture resistant, and fungus resistant

Trigger-start ignition easily ignites the flame

Versatile webbed flame completes a variety of household projects, including small diameter soldering, thawing, melting and heat application

Use only with propane fuel, such as the Bernzomatic 14.1 oz. Propane Hand Torch Cylinder

TRIGGER START - Trigger start torch for ease of lighting, instant on/off trigger increases fuel savings.

DURABLE - Stainless steel burn tube, cast aluminum body, brass burn tip.

HIGH PERFORMANCE - Pressure regulation allows the flame to burn in any direction and ensures consistent performance.

Wire Diameter: .031"

Alloy: 60% Tin / 40% Lead

Core Size: 66 (3.3% by weight)

Gel eliminates erratic operation with a film that will not clog orifices and threads on MIG nozzles and contact tips

Suitable for use on fixtures of semi and automatic welders

Odorless, non-flammable, non-toxic and silicon free

Novacan Old Masters Flux

All-purpose zinc flux

Cleans up easily with water

EASY TO USE-140 FC-I MIG machine uses 0.30, flux core wire. It has infinite voltage and wire feed speed control so you can dial in the perfect weld! Perfect entry level welder

POWERFUL- Up to 140 Amp output that allows you to weld mild steel up to 1/4 in plate

PORTABLE WELDER- Lightweight 19 lbs. easily carried to any Do-It-Yourself, Maintenance, Repair, Metal Fabrication and Hobbyist project

Solder Flux

Lead Free

Halogen Free

Industry standard for decades

Excellent solderability to a wide variety of metallization's

High activity rosin core formulation

4.5 ft of Low melting point alloy for IC removal.

Easily remove ICs without a Hot Air Station or Hot Air Gun.

Comes in convenient 6.5" lengths with instructions.

WHEN YOU NEED A HAND: Place the flexible and adjustable Quadhands gooseneck arms anywhere on the magnetic plate. Clamp a project (circuits, jewelry, hobby model) securely in place so you can solder, paint or repair with precision. Work smarter not harder!

STRONG MAGNETIC ARMS: Freely connect 4 magnetic, adjustable 16” and 8” arms to the plate. Clip your project to the 360° rotating alligator clamps and lock using thumb nuts. Then move, rearrange and position to keep them steady so you work with accuracy.

WEIGHTED BASE: Rubber feet keep the large powder coated steel 6” x 9” heavy base from sliding and stable. Wherever you stick the arms - the base provides a strong magnetic attraction, making sure your project stays put so you work with precision!

WHEN YOU NEED A HAND: Bolt your PanaVise (not included) to the mount then place the flexible, adjustable gooseneck arms anywhere on the magnetic plate. Clamp a project (circuit board) to solder, paint or repair with precision. Work smarter not harder!

STRONG MAGNETIC ARMS: Mount the PanaVise (hardware included) then clip the project to the 360° rotating alligator clamps with locking thumb nuts. Connect, move and position 4 magnetic, adjustable arms to the steel base so you work with ease.

WEIGHTED BASE: Rubber feet keep the extra large powder coated steel 4.6 lb heavy base from sliding and stable. Wherever you stick the arms - the oval base provides a strong magnetic attraction, making sure your project stays put so you work with accuracy!

WHEN YOU NEED A HAND: Place the flexible and adjustable Quadhands gooseneck arms anywhere on the XL magnetic plate. Clamp a large project (circuit board, jewelry, drone) securely in place to solder, paint or repair with precision. Work smarter not harder!

STRONG MAGNETIC ARMS: Freely connect 5 magnetic, adjustable 16”/12”/8” arms to the plate. Clip your project to the 360° rotating alligator clamps and lock using thumb nuts. Move, rearrange and position to keep them steady so you can work with accuracy.

WEIGHTED BASE: Rubber feet keep the extra large powder coated steel 8.5” x 11” heavy base from sliding and stable. Wherever you stick the arms - the base provides a strong magnetic attraction, making sure your project stays put so you work with accuracy!

【Multi-Function】Silicone work mat built-in scale ruler (0 ~38 cm/0~15 in), 124 screws position and 3 pcs magnetic parts areas and 18 notches to classify precision parts,which improve your work efficiency and make the maintenance platform cleaner and tidy.

【Heat Insulation】Heat insulation mat can resist the temperature as high as 500℃ and is anti-corrosive also,Its texture is soft, supports high temperature soldering work directly, which can protect maintenance platform from damage.

【Anti-Slip】Both surface and back side are adopting the anti-slip design, it won't slide around on your counter or station, and its attractive design keeps small parts from sliding, which prevent them from losting or misplacing.

The Package Length of the Product is 14.478 centimeters

The Package Width of the Product is 10.921 centimeters

The Package Height of the Product is 3.048 centimeters

Package Dimensions: 6.223 cms (L) x 6.731 cms (W) x 6.223 cms (H)

Product Type: Electronic Component

Package Quantity: 1