Best Kaisiking in 2026

【Multi-Function】Silicone work mat built-in scale ruler (0 ~38 cm/0~15 in), 124 screws position and 3 pcs magnetic parts areas and 18 notches to classify precision parts,which improve your work efficiency and make the maintenance platform cleaner and tidy.

【Heat Insulation】Heat insulation mat can resist the temperature as high as 500℃ and is anti-corrosive also,Its texture is soft, supports high temperature soldering work directly, which can protect maintenance platform from damage.

【Anti-Slip】Both surface and back side are adopting the anti-slip design, it won't slide around on your counter or station, and its attractive design keeps small parts from sliding, which prevent them from losting or misplacing.

【Wide Application】- Widely using for cell phone screen protector, LCD screen, LCD panel display, tablet PC, lens, battery, and camera cover, rubber pads ,billboard, advertising, sign post, poster, 3d card making, home, office, workshop, electronic equipment repair etc.

【High Transparency】- Using clear double sided acrylic tape, strong sticky securely attach your touch screen in position, under the red cover is clear and transparent, virtually invisible color helps keep surfaces smooth, will not leave any traces.

【High Quality】- The acrylic tape is made of polyester and soft PET material, coating acrylic on two sides, has aging resistance, shear resistance, solvent resistance, softening resistance, moisture resistance, processing properties

【Wide Application】- Widely using for cell phone screen protector, LCD panel display, tablet PC, lens, battery, and camera cover, rubber pads ,billboard, advertising, sign post, poster, 3d card making, home, office, workshop etc.

【High Transparency】- Using clear double sided acrylic tape, strong sticky securely attach your touch screen in position, under the red cover is clear and transparent, virtually invisible color helps keep surfaces smooth, will not leave any traces.

【High Quality】- The acrylic tape is made of polyester and soft PET material, coating acrylic on two sides, has aging resistance, shear resistance, solvent resistance, softening resistance, moisture resistance, processing properties

【High Quality】- Phone repair tape is made of high quality materials, has waterproof, sealed, strong adhesion, high tensile strength, aging resistance, solvent resistance, softening resistance properties.

【Strong Adhesion】- LCD adhesive tape have excellent adhesion at low temperatures and high temperatures. It is highly adhesive and securely holds the touch screen in place.

【High Performance】- Phone screen adhesive tape has high peel strength, high initial adhesion and adhesive strength, also can be removed easily, will not leave any traces.

★Kaisiking soldering tip cleaner cleans better than conventional, it is no need to use water to keep the soldering tips clean, so that will not reduce the tip's temperature, improve your working efficiency

★Soldering tip cleaner wire uses high quality brass material, It is smokeless, tasteless, non-toxic, Soft coiled brass tip cleaner can reduce oxide accumulation effectively and prolong soldering iron tip service life

★This solder wire holder enables to hold the iron tip and keep it last longer, when you plug the soldering iron on tip cleaner, the tip will be cleaned thoroughly, there won't have tin residual outside the container

【High Quality & Super Suction】- Screen suction cup is made of durable ABS and natural rubber materials, and has a long service life. The suction cup has a lifting capacity of 12 kg (26 lb), which can help you open the phone screen.

【Screen opening tools】- The tools in the screen opening tool set have high hardness and toughness, can be reused, can help open the screen cover, and prevent scratching the casing, which is ideal for professionals and DIY.

【Easy to use】- LCD suction cup with locking handle with latch, easy to use. If you want to open a mobile phone screen other than iPhone, use a tool to remove the glue layer connected to the LCD screen, and then use the screen suction cup to open the screen.

【Powder Coated Metal Base】The pentagonal powder-coated steel base is made of high-quality materials, with a powder-coated finish, which is durable and weighs approximately 0.66 lbs. There is a storage tray in the middle of the base to prevent parts from being lost. Rubber feet ensure stability and protect your countertop from scuffs and scratches, ensuring your workstation doesn't tip over and move.

【5 Flexible Metal Arms】Five adjustable metal gooseneck arms are fixed in the holes of the pentagon. Four 6.7" adjustable metal gooseneck arms with stainless steel precision alligator clips help the arms, completely freeing your hands to work easier than ever. An adjustable metal gooseneck arm with a 3X magnifier helps you see details or tiny things, improving work precision and efficiency, and freeing your eyes from fatigue.

【360 Degree Stainless Steel Precision Alligator Clip】The alligator clip is fixed with screws, which makes the alligator clip more firm, not easy to fall off, and can be rotated 360 degrees. Each clip comes with a removable rubber sleeve, which means you can avoid scratching the polished surface of your jewelry or avoid electrical shorts.

【High quality】This suction cup lifter is a great dent puller. Suction cup puller are made of high quality ABS material and durable high strength natural rubber. The soft rubber pad is gentle on surfaces and won’t scratch the paint.

【Unique design】Dent suction cup is ergonomically designed and has the convenience of single stroke pump operation. One hand buckle design, precise structure, the pull strong and lasting, not easy deformation.

【Dent Repair Tool】1 x 4.5 inch Suction Cup, 2 x 2.25 inch Suction cup. Suction cup dent repair tool kit allows you to remove dings and small dents on certain areas of your vehicle. (Please make sure that the dent are in the flat surface and should be larger than the bottom suction cup diameter.)

【Auto Body Dent Removal tool】Paintless auto body dent repair tools for car body is a tool for repairing dents caused by collisions on metal surfaces. The paintless dent repair kit is scientifically designed using the lever principle, saving labor, time, money, and no damage to the original car paint, suitable for novices and professionals.

【Professional Paintless Dent Removal Repair Tools】The car dent puller removal is ergonomic and designed using the lever principle. The dent puller can adjust the spacing and turn the button to better fit the dent, which is efficient and labor-saving. The bottom is made of soft rubber, which will not damage the original car paint during use.(Repair kits are not recommended if the original paint has been damaged prior to repairing the dent.)

【Easy to Use】The Dent Removal Kit comes with a detailed instruction manual with detailed repair steps, which makes it easier for you to repair the dent on your own anytime, anywhere. Our dent puller kit accessories are strong and durable enough to help you fix dents yourself many times over.

Kester 24-6040-0027 - (1) Spool, 1 Pound per Spool

Diameter: 0.031" Inch (0.80mm)

Alloy: 60% Tin / 40% Lead (Product contains Halogen)

Lead free (RoHS Compliant)

Removes tip oxidation

No-Clean compatible formulation

Easy-To-Use Adjustable Temperature Control Built Into The Handle

Easy-To-Clean Solder Recovery Chamber Minimizes Maintenance And Reduces Waste

Fast Release Tool For The Quick-Change Nozzle System

The solder sucker has a large capacity cylinder and silicone tube at the tip for improved suction

[Uses] For solder removal of substrates

Nozzle is heat-resistant silicone tube that will not damage the object

Size: length 186 x width 84 mm.

Applicable models: FX-600, FX-601, PRESTO, DASH

Weight: 380 g.

4.5 ft of Low melting point alloy for IC removal.

Easily remove ICs without a Hot Air Station or Hot Air Gun.

Comes in convenient 6.5" lengths with instructions.

WHEN YOU NEED A HAND: Place the flexible and adjustable Quadhands gooseneck arms anywhere on the magnetic plate. Clamp a project (circuits, jewelry, hobby model) securely in place so you can solder, paint or repair with precision. Work smarter not harder!

STRONG MAGNETIC ARMS: Freely connect 4 magnetic, adjustable 16” and 8” arms to the plate. Clip your project to the 360° rotating alligator clamps and lock using thumb nuts. Then move, rearrange and position to keep them steady so you work with accuracy.

WEIGHTED BASE: Rubber feet keep the large powder coated steel 6” x 9” heavy base from sliding and stable. Wherever you stick the arms - the base provides a strong magnetic attraction, making sure your project stays put so you work with precision!

WHEN YOU NEED A HAND: Bolt your PanaVise (not included) to the mount then place the flexible, adjustable gooseneck arms anywhere on the magnetic plate. Clamp a project (circuit board) to solder, paint or repair with precision. Work smarter not harder!

STRONG MAGNETIC ARMS: Mount the PanaVise (hardware included) then clip the project to the 360° rotating alligator clamps with locking thumb nuts. Connect, move and position 4 magnetic, adjustable arms to the steel base so you work with ease.

WEIGHTED BASE: Rubber feet keep the extra large powder coated steel 4.6 lb heavy base from sliding and stable. Wherever you stick the arms - the oval base provides a strong magnetic attraction, making sure your project stays put so you work with accuracy!

WHEN YOU NEED A HAND: Place the flexible and adjustable Quadhands gooseneck arms anywhere on the XL magnetic plate. Clamp a large project (circuit board, jewelry, drone) securely in place to solder, paint or repair with precision. Work smarter not harder!

STRONG MAGNETIC ARMS: Freely connect 5 magnetic, adjustable 16”/12”/8” arms to the plate. Clip your project to the 360° rotating alligator clamps and lock using thumb nuts. Move, rearrange and position to keep them steady so you can work with accuracy.

WEIGHTED BASE: Rubber feet keep the extra large powder coated steel 8.5” x 11” heavy base from sliding and stable. Wherever you stick the arms - the base provides a strong magnetic attraction, making sure your project stays put so you work with accuracy!

【Multi-Function】Silicone work mat built-in scale ruler (0 ~38 cm/0~15 in), 124 screws position and 3 pcs magnetic parts areas and 18 notches to classify precision parts,which improve your work efficiency and make the maintenance platform cleaner and tidy.

【Heat Insulation】Heat insulation mat can resist the temperature as high as 500℃ and is anti-corrosive also,Its texture is soft, supports high temperature soldering work directly, which can protect maintenance platform from damage.

【Anti-Slip】Both surface and back side are adopting the anti-slip design, it won't slide around on your counter or station, and its attractive design keeps small parts from sliding, which prevent them from losting or misplacing.

12 grams each / 10 per pack

Used for cleaning soldering tips

Material Composition: 100% brass

【Powerful Suction Solder Sucker】The solder sucker has an aluminum bronze frame and a high pressure vacuum which can remove solder from a printed circuit board effectively.

【Powerful Suction Solder Sucker】The solder sucker has an aluminum bronze frame and a high pressure vacuum which can remove solder from a printed circuit board effectively.

【Alloy Braided Solder Wick】Precision weaving solder braid with the size 2.5mm Width, 1.5m Length, it could help clean the spare solder on the pin away to avoid short circuit, especially in small, hard to reach areas.

Upgrade Product: Circuit Board Holder has four pillars, each pillar is magnetic, adjustable magnetic helping hands can be positioned anywhere on the heavy steel base, which can stuck any shape of the board.

Magnetic Flexible Arms: 4 adjustable metal gooseneck arms with strong magnetic base,which have a powerful attraction to the steel base. We included two 9" arms, two 4.5" arms helping hand arms, Completely free your hands up and work easier than ever before.

Stainless Steel Base: 9 x 6 inch powder coated steel base with non-slip rubber pads, keep the soldering helping hands from sliding around on your bench.

Active range 1050°F - 1800°F

1lb Jar

Made in USA

Solder Paste

Leaded

No Clean

Includes (4) brazing rods .050 inch x 1/8 inch x 20 inches Stay-Silv 15% Flat Brazing Rods

Uses for many copper-to-copper applications where moderate fit-up can be maintained and brazing temperature is not critical.

Solidus Temperature: 1190°F, 643°C | Liquidus Temperature: 1475°F, 802°C | Recommended Brazing Range: 1300-1500°F, 705-815°C

100 % SATISFACTION GUARANTED  ★  Excellent quality and an empty canvas for electrical enthusiasts! An easy soldering; 0.1" hole spacing for DIP integrated circuits and headers.

THIS IS NOT YOUR NORMAL PERF BOARD!  ★  This board is much higher quality with plated-through-holes and annular rings that will not lift off the PCB under normal soldering conditions

MUTI-PURPOSE ★ General purpose prototyping circuit board for analog and digital use; With pre-tinned plated holes; Double sided board with plated-thru holes allows components to be easily soldered to either side of the board

Premium quality ER309L stainless steel TIG welding rods with available diameters 0.045", 1/16", 3/32" and 1/8"; 36" length. Package of 1-Lb, 5-Lb and 10-Lb.

Specification: AWS A5.9/ASME SFA A5.9/ER309L; 36" (914mm) length of rod with single end stamped; typical chemical composition %: C=0.025, Cr=24.5, Ni=13, Si=0.38, Mo=0.35, Mn=1.88, Cu=0.35, P=0.02, S=0.01, remain=Fe.

Features and Applications: filler metal ER309L rod for TIG welding (GTAW) process to weld dissimilar alloys like mild steel and the stainless steels, and also for direct overlay on mild steel for corrosion applications; occasionally used for welding "18-8" base metals when severe corrosion conditions exist or dissimilar metals; ER309L stainless steel exhibits high strength and good toughness over a wide range of temperatures; shielding gas required, usually 100% Argon.

☑️ Premium Quality - Solder Star tips heat up well, keep a nice tin and have excellent heat transfer.

☑️ Wide Assortment - Tips set includes one piece of ETA, ETT, ETB, ETS, ETD model (screwdriver, chisel, conical). With this set in hand, you will be able to handle just about any electronic soldering task.

☑️ Perfect Compatibility - Our ET series tips work perfectly with Weller WES51, WESD51, WCC100, PES51, WE1010NA, EC1201A, EC2000, EC2001 analog, digital stations and pencils (not compatible with soldering-guns).

🍏🍎Upgraded System - Our nebulizer machine mainly updates the internal chip and the operating system. Compared with the original model, the upgraded nebulizer can help you for a longer time. The atomization is more stable, the mist is more delicate, and the atomization particles are about 0.5-2 μm. The absorption effect is better.

🍏🍎Adjustable Atomization Rate - The atomization rate is about 0.15 ml/min to 0.35 ml/min, which is suitable for toddler, kids, adults and the elderly. It is a necessary health magic for every family. The nebulizer machine comes with mouthpiece (our mouthpiece has a opening above it, which allows you to breathe more comfortably when you use it), adult mask and child mask. You can choose your own needs.

🍏🍎Unique Details - Jet nebulizer uses AC 120V/60Hz power supply. The power cord is 1.5m which long enough for you to watch movies or rest while atomizing. Compressor nebulizer comes with 10 filter cottons, which needs to be replaced regularly to obtain more fresh air. Usually replace it every 3 months (actually depends on your use frequency). The switch with dust cover to prevent water from entering and damage the switch, so as to prolong the service life of the machine.

【One-handed Use Desoldering Pump】The Solder sucker with simple construction, so whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready.

【Powerful Suction Solder Sucker】The solder sucker has an aluminum bronze frame and a high pressure vacuum which can remove solder from a printed circuit board effectively.

【Alloy Braided Solder Wick】Precision weaving solder braid with the size 2.5mm Width, 1.5m Length, it could help clean the spare solder on the pin away to avoid short circuit, especially in small, hard to reach areas.