Best Weldingcity in 2026

Premium quality ER308L stainless steel TIG welding rods; available diameters 0.045", 1/16", 3/32" and 1/8" with 36" length. Package of 1-Lb, 5-Lb and 10-Lb.

Specification: AWS A5.9/ASME SFA A5.9/ER308L; 36" (914mm) length of rod with single end stamped; typical deposited chemical composition %: C=0.02, Si=0.32, Mn=1.70, P=0.01, S=0.009, Cr=20.0, Ni=10, remain=Fe.

Features and Applications: filler metal for TIG welding (GTAW) process in stainless steel 304, 304L, 308, 308L, 321 and 347; with carbon content held to a max of .03% to reduce the possibility of intergranular carbide precipitation; most popular stainless wire for general-purpose applications where corrosion is moderate and applications at cryogenic temperatures; shielding gas required, usually 100% Argon.

Premium quality ER308L stainless steel TIG welding rods; available diameters 0.045", 1/16", 3/32" and 1/8" with 36" length. Package of 1-Lb, 5-Lb and 10-Lb.

Specification: AWS A5.9/ASME SFA A5.9/ER308L; 36" (914mm) length of rod with single end stamped; typical deposited chemical composition %: C=0.02, Si=0.32, Mn=1.70, P=0.01, S=0.009, Cr=20.0, Ni=10, remain=Fe.

Features and Applications: filler metal for TIG welding (GTAW) process in stainless steel 304, 304L, 308, 308L, 321 and 347; with carbon content held to a max of .03% to reduce the possibility of intergranular carbide precipitation; most popular stainless wire for general-purpose applications where corrosion is moderate and applications at cryogenic temperatures; shielding gas required, usually 100% Argon.

Premium quality ER308L stainless steel TIG welding rods; available diameters 0.045", 1/16", 3/32" and 1/8" with 36" length. Package of 1-Lb, 5-Lb and 10-Lb.

Specification: AWS A5.9/ASME SFA A5.9/ER308L; 36" (914mm) length of rod with single end stamped; typical deposited chemical composition %: C=0.02, Si=0.32, Mn=1.70, P=0.01, S=0.009, Cr=20.0, Ni=10, remain=Fe.

Features and Applications: filler metal for TIG welding (GTAW) process in stainless steel 304, 304L, 308, 308L, 321 and 347; with carbon content held to a max of .03% to reduce the possibility of intergranular carbide precipitation; most popular stainless wire for general-purpose applications where corrosion is moderate and applications at cryogenic temperatures; shielding gas required, usually 100% Argon.

Premium quality ER308L stainless steel TIG welding rods; available diameters 0.045", 1/16", 3/32" and 1/8" with 36" length. Package of 1-Lb, 5-Lb and 10-Lb.

Specification: AWS A5.9/ASME SFA A5.9/ER308L; 36" (914mm) length of rod with single end stamped; typical deposited chemical composition %: C=0.02, Si=0.32, Mn=1.70, P=0.01, S=0.009, Cr=20.0, Ni=10, remain=Fe.

Features and Applications: filler metal for TIG welding (GTAW) process in stainless steel 304, 304L, 308, 308L, 321 and 347; with carbon content held to a max of .03% to reduce the possibility of intergranular carbide precipitation; most popular stainless wire for general-purpose applications where corrosion is moderate and applications at cryogenic temperatures; shielding gas required, usually 100% Argon.

TIG welding torch power cable hose adapter plug for air-cooling torch gas/electrical connection: regular Weldcraft style female-end adapter 105Z57 and Dinse-type adapters (50mm and 25mm, gas-through or separate hose). Adapter only; power cable not included.

105Z57 regular standard Weldcraft style adapter with electrical stud hole and female fittings 5/8-18 RH (to gas hose) and 3/8-24 RH (to power cable hose). Dinse-type adapter available with Dinse 50mm (0.508" dia.) and 25mm (small, 0.355" dia) with options of in-line (gas-thru) and separate gas hose for different welders. All with female receptacle 3/8-24 RH to accept 1-pcs style power cable hose 57Y01R/57Y03R and other equivalent air-cooled TIG welding torch (usually 9/17-series).

For Miller welder, Dinse (50mm) plug with separate gas hose (Miller P/N 195378) or gas-thru (Miller P/N 194722) can be found in Maxstar 200/200STR/200SD/200DX&LX/250T/300, Dynasty 200, 300SD/DX/LX, Syncrowave 180SD, CST, Invision and XMT. Dinse (25mm small) gas-thru plug (Miller P/N 273483 or 195234) is for power supplies with small gas-thru Dinse connection.

Premium quality ER308L stainless steel MIG welding wire 2-Lb spool.

Conformed to AWS A5.9/ASME SFA A5.9/ER308L. 2-lb net weight of ER308L stainless steel welding wire. 4" spool wrapped in moisture-resistant plastic film. Typical deposited chemical composition %: C=0.02, Si=0.32, Mn=1.70, P=0.01, S=0.009, Cr=20.0, Ni=10, remain=Fe.

For MIG welding (GMAW) stainless steel 304, 304L, 308, 308L, 321 and 347, etc. With a carbon content held to a max of .03% to reduce the possibility of intergranular carbide precipitation. Most popular stainless wire for general-purpose applications where corrosion is moderate and applications at cryogenic temperatures. Shielding gas required, usually Argon/CO2 mix.

Pack of 10-pcs premium TIG welding Tungsten electrodes 2.0% Thoriated. AWS Classification: EW-Th2 (Red). Conform to ANSI/AWS Standard A5.12M/A5.12:2009 ISO 6848:2004 MOD.

Higher current range and stability. Better arc starts with lower tendency to spit. Medium erosion. Increased resistance to weld pool contamination.

Available Tungsten electrode diameters: 0.040" (0.5mm), 1/16" (1.6mm), 3/32" (2.4mm), 1/8" (3.2mm) and 5/32" (4.0mm); 7" (176mm) length. Ground annealed.

Two rolls premium quality mild steel gas-shielding MIG welding wire ER70S-6 11-lb spool. Copper coated welding wire for GMAW welding process with shielding-gas CO2 or Ar/CO2 mixed gas.

Wire diameters available: 0.023" (0.6mm), 0.030" (0.8mm), 0.035" (0.9mm) and 0.045" (1.2mm).

Conformed to AWS A5.18/ASME SF A5.18/ER70S-6; 11-lb weight of welding wire; 8-in spool, 2-in center hole; wrapped in moisture-resistant plastic film.

Premium quality ER70S-2 mild steel alloy copper coated TIG welding rods; diameter 0.045", 1/16", 3/32" and 1/8" with 36" length.

Specification: conformed to AWS A5.18/ASME SFA A5.18/ER70S-2; 36" (914mm) long welding rods with single end stamped. Shielding Gas: Argon/CO2.

Features and Applications: ER70S-2 is a triple deoxidized wire which provides high quality and defect free weld deposits when properly used on most carbon steels for TIG welding (GTAW) process. All position welding. Typical applications: repairs on a variety of mild and low alloy steel; small diameter pipe and tubing; sheet metal applications; root pass pipe welding, etc.

Premium quality ER309L stainless steel TIG welding rods with available diameters 0.045", 1/16", 3/32" and 1/8"; 36" length. Package of 1-Lb, 5-Lb and 10-Lb.

Specification: AWS A5.9/ASME SFA A5.9/ER309L; 36" (914mm) length of rod with single end stamped; typical chemical composition %: C=0.025, Cr=24.5, Ni=13, Si=0.38, Mo=0.35, Mn=1.88, Cu=0.35, P=0.02, S=0.01, remain=Fe.

Features and Applications: filler metal ER309L rod for TIG welding (GTAW) process to weld dissimilar alloys like mild steel and the stainless steels, and also for direct overlay on mild steel for corrosion applications; occasionally used for welding "18-8" base metals when severe corrosion conditions exist or dissimilar metals; ER309L stainless steel exhibits high strength and good toughness over a wide range of temperatures; shielding gas required, usually 100% Argon.

Premium quality ER70S-2 mild steel alloy copper coated TIG welding rods; diameter 0.045", 1/16", 3/32" and 1/8" with 36" length.

Specification: conformed to AWS A5.18/ASME SFA A5.18/ER70S-2; 36" (914mm) long welding rods with single end stamped. Shielding Gas: Argon/CO2.

Features and Applications: ER70S-2 is a triple deoxidized wire which provides high quality and defect free weld deposits when properly used on most carbon steels for TIG welding (GTAW) process. All position welding. Typical applications: repairs on a variety of mild and low alloy steel; small diameter pipe and tubing; sheet metal applications; root pass pipe welding, etc.

Premium quality ER309L stainless steel TIG welding rods with available diameters 0.045", 1/16", 3/32" and 1/8"; 36" length. Package of 1-Lb, 5-Lb and 10-Lb.

Specification: AWS A5.9/ASME SFA A5.9/ER309L; 36" (914mm) length of rod with single end stamped; typical chemical composition %: C=0.025, Cr=24.5, Ni=13, Si=0.38, Mo=0.35, Mn=1.88, Cu=0.35, P=0.02, S=0.01, remain=Fe.

Features and Applications: filler metal ER309L rod for TIG welding (GTAW) process to weld dissimilar alloys like mild steel and the stainless steels, and also for direct overlay on mild steel for corrosion applications; occasionally used for welding "18-8" base metals when severe corrosion conditions exist or dissimilar metals; ER309L stainless steel exhibits high strength and good toughness over a wide range of temperatures; shielding gas required, usually 100% Argon.

Premium quality ER70S-6 mild steel alloy copper coated TIG welding rods; diameter 0.045", 1/16", 3/32" and 1/8" with 36" length. Package of 5-Lb and 10-Lb.

Specification: conformed to AWS A5.18/ASME SFA A5.18/ER70S-6; 36" (914mm) long welding rods with single end stamped. Shielding Gas: Argon/CO2.

Features: ER70S-6 is a general purpose welding wire for fabrication of mild steel which contains higher levels of manganese and silicon to produce high quality welds when used on dirty, oily, or rusty steel for TIG welding (GTAW) process. The deoxidizers also provide better wetting, a flatter bead shape and the capability of faster travel speeds, as well as better fluidity of the weld pool, thus creating a smoother bead appearance and resulting in minimal post-weld grinding.

10-pk premium TIG welding Tungsten electrodes tri-element non-radioactive. Electrode diameters: 0.040" (0.5mm), 1/16" (1.6mm), 3/32" (2.4mm), 1/8" (3.2mm) and 5/32" (4.0mm); 7" (176mm) length.

AWS Classification: EWG (Purple). Conform to ANSI/AWS Standard A5.12M/A5.12:2009 ISO 6848:2004 MOD. Ground annealed.

Mixed tri-oxides of Lanthanum, Zirconium and Yttrium with total rare earth composition around 1.5% - 1.8%; Tungsten remains. Non-radioactive Tungsten electrodes; excellent substitute for Thoriated Tungsten electrodes. Wide current range and low burn-off rate. Easy arc starts and good stability.

Premium quality ER4043 Aluminum TIG welding rods with available diameters 1/16", 3/32" and 1/8"; 36" length. Package of 2-Lb, 5-Lb and 10-Lb.

Specification: AWS A5.10/ASME SFA A5.10/ER4043; 36" (914mm) length of rods with single end stamped (or marked on rod); typical chemical composition %: Si=4.5-6.0; Fe=0.8; Cu=0.3; Mn=0.05; Mg=0.05; Zn=0.1; Ti=0.2; Al=balance.

Features and Applications: filler metal ER4043 rod for TIG welding (GTAW) welding process; general-purpose, all-position aluminum welding rod used to weld various grades of aluminum; it contains silicon additives, which may improve fluidity of the weld pool and also produces a weld less sensitive to cracking; its bright weld finish makes it a popular choice of welders; shielding gas required, usually 100% Argon, Helium or mix.

10-pk premium TIG welding Tungsten electrodes tri-element non-radioactive. Electrode diameters: 0.040" (0.5mm), 1/16" (1.6mm), 3/32" (2.4mm), 1/8" (3.2mm) and 5/32" (4.0mm); 7" (176mm) length.

AWS Classification: EWG (Purple). Conform to ANSI/AWS Standard A5.12M/A5.12:2009 ISO 6848:2004 MOD. Ground annealed.

Mixed tri-oxides of Lanthanum, Zirconium and Yttrium with total rare earth composition around 1.5% - 1.8%; Tungsten remains. Non-radioactive Tungsten electrodes; excellent substitute for Thoriated Tungsten electrodes. Wide current range and low burn-off rate. Easy arc starts and good stability.

Premium quality ER4043 Aluminum TIG welding rods with available diameters 1/16", 3/32" and 1/8"; 36" length. Package of 2-Lb, 5-Lb and 10-Lb.

Specification: AWS A5.10/ASME SFA A5.10/ER4043; 36" (914mm) length of rods with single end stamped (or marked on rod); typical chemical composition %: Si=4.5-6.0; Fe=0.8; Cu=0.3; Mn=0.05; Mg=0.05; Zn=0.1; Ti=0.2; Al=balance.

Features and Applications: filler metal ER4043 rod for TIG welding (GTAW) welding process; general-purpose, all-position aluminum welding rod used to weld various grades of aluminum; it contains silicon additives, which may improve fluidity of the weld pool and also produces a weld less sensitive to cracking; its bright weld finish makes it a popular choice of welders; shielding gas required, usually 100% Argon, Helium or mix.

Premium quality ER4043 Aluminum TIG welding rods with available diameters 1/16", 3/32" and 1/8"; 36" length. Package of 2-Lb, 5-Lb and 10-Lb.

Specification: AWS A5.10/ASME SFA A5.10/ER4043; 36" (914mm) length of rods with single end stamped (or marked on rod); typical chemical composition %: Si=4.5-6.0; Fe=0.8; Cu=0.3; Mn=0.05; Mg=0.05; Zn=0.1; Ti=0.2; Al=balance.

Features and Applications: filler metal ER4043 rod for TIG welding (GTAW) welding process; general-purpose, all-position aluminum welding rod used to weld various grades of aluminum; it contains silicon additives, which may improve fluidity of the weld pool and also produces a weld less sensitive to cracking; its bright weld finish makes it a popular choice of welders; shielding gas required, usually 100% Argon, Helium or mix.

Premium quality ER308L stainless steel MIG welding wire 2-Lb spool.

Conformed to AWS A5.9/ASME SFA A5.9/ER308L. 2-lb net weight of ER308L stainless steel welding wire. 4" spool wrapped in moisture-resistant plastic film. Typical deposited chemical composition %: C=0.02, Si=0.32, Mn=1.70, P=0.01, S=0.009, Cr=20.0, Ni=10, remain=Fe.

For MIG welding (GMAW) stainless steel 304, 304L, 308, 308L, 321 and 347, etc. With a carbon content held to a max of .03% to reduce the possibility of intergranular carbide precipitation. Most popular stainless wire for general-purpose applications where corrosion is moderate and applications at cryogenic temperatures. Shielding gas required, usually Argon/CO2 mix.

Premium quality ER70S-2 mild carbon steel alloy copper coated TIG welding rods; diameter 0.045", 1/16", 3/32" and 1/8" with 36" length.

Specification: conformed to AWS A5.18/ASME SFA A5.18/ER70S-2; 36" (914mm) long welding rods with single end stamped. Shielding Gas: Argon/CO2.

Features and Applications: ER70S-2 is a triple deoxidized wire which provides high quality and defect free weld deposits when properly used on most carbon steels for TIG welding (GTAW) process. All position welding. Typical applications: repairs on a variety of mild and low alloy steel; small diameter pipe and tubing; sheet metal applications; root pass pipe welding, etc.

Premium quality Tweco-style twist-lock insulated cable connector/adapter connection via positive cam action and female terminal adapter (threaded stud to Tweco male connector).

Tweco-style insulated male connector is with a pin of 5/8" diameter and 45° angle terminal adapter (2-AF) is with 17/32" stud hole and female acceptor for Tweco male plug. All connectors/adapters are with heat and oil resistant insulated covers.

Connectors are compatible with Tweco 2-MPC, Lenco LC-40, Miller 191981/218677 for welding cable AWG #4-2/0 connection. Female terminal adapter is compatible with Tweco 2-AF and Miller 218678. Connection via a positive cam action.

Premium quality 100-amp/150-amp with 10-ft and 12-ft cable air cooled MIG welding gun, ideal replacement for Hobart H-10. Fully interchangeable with Hobart MIG gun H-10 (195957) and H100S2-10 (245924).

Usually H-10/H100S2-10 MIG gun can be found on Hobart Handler welder 130XL, 135, 140, 175, 187 and AutoArc XLT142 & XLT182, etc. See all listed pictures for details of front consumables, rear plug and control cable type. CHECK YOUR WELDER MANUAL FOR MATCHING.

Front consumables comes with Miller style 000068 (0.035") contact tip, 169715 nozzle, 169716 gas diffuser and 194011 wire liner. Current rating: 100A and 150A.

Premium quality Tweco-style twist-lock insulated cable connector/adapter connection via positive cam action and female terminal adapter (threaded stud to Tweco male connector).

Tweco-style insulated male connector is with a pin of 5/8" diameter and 45° angle terminal adapter (2-AF) is with 17/32" stud hole and female acceptor for Tweco male plug. All connectors/adapters are with heat and oil resistant insulated covers.

Connectors are compatible with Tweco 2-MPC, Lenco LC-40, Miller 191981/218677 for welding cable AWG #4-2/0 connection. Female terminal adapter is compatible with Tweco 2-AF and Miller 218678. Connection via a positive cam action.

Premium quality light-duty air cooled MIG welding gun 100A-150A with 10-ft and 12-ft cable replacement for Lincoln Magnum 100L model K530-5 (control cable with spade terminal).

Use with many Lincoln welders series such as SP, Handy MIG, MIG-Pak, Pro 100, Pro-MIG, Pro-Core 100, Weldmark, Weld-Pak, etc. See all listed pictures for details of front consumables, rear plug and control cable type. CHECK YOUR WELDER MANUAL FOR MATCHING.

Small, lightweight gun that's great for most home, farm and small shop projects, auto-body work and light maintenance or repair applications.

Premium cable cover/sleeve for air-cooled and water-cooled TIG welding torch 9, 17, 18, 20, 25 and 26 series.

Cover length and width: 12-ft and 24-ft long; 3-in wide for torch 9 and 17, 4-in wide for torch 18, 20, 25 and 26.

Made of high quality Nylon fabric with zipper.

Pack of 10-pcs premium TIG welding Tungsten electrodes 2.0% Thoriated. AWS Classification: EW-Th2 (Red). Conform to ANSI/AWS Standard A5.12M/A5.12:2009 ISO 6848:2004 MOD.

Higher current range and stability. Better arc starts with lower tendency to spit. Medium erosion. Increased resistance to weld pool contamination.

Available Tungsten electrode diameters: 0.040" (0.5mm), 1/16" (1.6mm), 3/32" (2.4mm), 1/8" (3.2mm) and 5/32" (4.0mm); 7" (176mm) length. Ground annealed.

Premium TIG welding Tungsten electrodes. Conform to ANSI/AWS Standard A5.12M/A5.12:2009 ISO 6848:2004 MOD.

Available Tungsten alloying: 2.0% Thoriated (EW-Th2/Red), 1.5-1.8% mixed tri-oxides of Lanthanum, Zirconium and Yttrium (EWG/Purple, non-radioactive), 2.0% Lanthanated (EW-La2/Blue), 2.0% Ceriated (EW-Ce2/Gray), 1.5% Lanthanated (EW-La15/Gold) and Pure (EW-P/Green).

Tungsten electrode diameters: 0.040" (0.5mm), 1/16" (1.6mm), 3/32" (2.4mm) and 1/8" (3.2mm); 7" (176mm) length. Ground annealed.

Pack of 25 premium quality 11-series Tweco Lincoln style MIG welding gun contact tips. Available tip sizes: 0.023" (11-23), 0.030" (11-30), 0.035" (11-35), 0.040" (11-40) and 0.045" (11-45). Tip length 1" and outside diameter 0.25" (standard duty).

Ideal replacement for Lincoln contact tip KP11 series in Lincoln Magnum 100L and Tweco No.1/Mini MIG welding guns, as well as many other specific MIG guns using 11-series contact tips.

Machined from a copper alloy tubing providing a consistent and smooth inside diameter surface. Each contact tip is marked showing wire diameter. Inside diameter tolerance is held to +/-.003". With excellent electrical properties ideal for use in standard welding application up to 200Amp.

Premium quality ER316L stainless steel TIG welding rods with available diameters 0.045", 1/16", 3/32" and 1/8"; 36" length. Package of 1-Lb, 5-Lb and 10-Lb.

Specification: AWS A5.9/ASME SFA A5.9/ER316L; 36" (914mm) length of rods with single end stamped; typical deposited chemical composition %: C=0.02, Cr=18.5, Ni=12.5, Mn=1.80, Mo=2.50, Si=0.35, P=0.01, S= 0.01, remain=Fe.

Features and Applications: filler metal ER316L rod for TIG welding (GTAW) process; 0.03% maximum carbon content to provide resistance against intergranular corrosion and 2-3% molybdenum increases corrosion resistance; good bead-wetting characteristics, great puddle control and clean welds with minimal smut; use for welding similar alloys containing approximately 2% molybdenum. shielding gas required, usually 100% Argon.

10-pcs premium TIG welding Tungsten electrodes pure (Tungsten >99.5%). Electrode diameter available: 0.040" (0.5mm), 1/16" (1.6mm), 3/32" (2.4mm), 1/8" (3.2mm) and 5/32" (4.0mm); 7" (176mm) length.

AWS Classification: EW-P (Green). Conform to ANSI/AWS Standard A5.12M/A5.12:2009 ISO 6848:2004 MOD. Ground annealed.

Better stability when used with alternating current. Lower current-carrying capacity and tends to spit at higher current. May balls easily. Low cost. Usually used for non-critical welds only.