Best Double Sided Pcb Prototyping Boards in 2026

★32 pieces double sided PCB prototype boards well packed in a plastic tray which is very easy to store and take out

★5 different size boards to meet your demands when designing your own Arduino kits, electronic experiments and DIY projects

★4 mounting holes at the corners of the board are very convenient for installing them together.

This product contains five different sizes of circuit boards£¬2*8CM,3*7CM,4*6CM,5*7CM,6*8CM,You also can cut these pc boards into any shape any size, it can meet all your needs.

The boards are all basic green body with soldered holes. Good plating around the holes and a nice variety of sizes for the price.

Package comes with totally 50 pcs prototype circuit blank breadboards that is enough for various electronic and soldering project.

100 % SATISFACTION GUARANTED  ★  Excellent quality and an empty canvas for electrical enthusiasts! An easy soldering; 0.1" hole spacing for DIP integrated circuits and headers.

THIS IS NOT YOUR NORMAL PERF BOARD!  ★  This board is much higher quality with plated-through-holes and annular rings that will not lift off the PCB under normal soldering conditions

MUTI-PURPOSE ★ General purpose prototyping circuit board for analog and digital use; With pre-tinned plated holes; Double sided board with plated-thru holes allows components to be easily soldered to either side of the board

These double side (DS) pcbs with plated through holes design, Each hole on the same side are electrically isolated (NOT a stripboard or sigle side) solderable, You can solder to bridging holes together or use 22-29awg jumper wires for connection. Isolate points bare perfboard.

Lettering on both side of the PC board makes it easier for prototyping projects, Cuttable fiber glass and FR-4 flame resistant good for soldering,Muti Pins, easy to cut and solder with appropriate tools. Flux for easy soldering and extended serving life of printed blank perforated board. Pre-tined plating thru holes

Kits : 20pcs set ( 5pcs 4x6 / 5pcs 3x7 / 5pcs 5x7 / 5pcs 2x8 ) 2*8 3*7 4*6 5*7 CM protoboard | Hole-diameter: 1 mm / 0.04 inches | Hole-pitch point: 2.54mm / 0.1 inches | Conner Mounting-Hole: 2 mm / 0.08 inch | Thickness: 1.6mm / 0.06 inch 5pcs 4 X 6CM double-sided PCB board with 280 holes 5pcs 3 X 7CM double-sided PCB board with 240 holes 5pcs 5 X 7CM double-sided PCB board with 432 holes 5pcs 2 X 8CM double-sided PCB board with 168 holes

The Package comes with 2 pcs double sided pcb prototype board, the proto boards are in the color of Green.

The size of printed circuit board : 9cm X 15cm(3.543" X 5.906"); The weight of one piece universal printed circuit board: 39.0g/1.376oz

The pcb board is double sided, with the plated holes are pre-tinned, the hole diameter of the prototype circuit board is about: 1 mm/0.039", The hole number of printed circuit universal breadboard is: 1836

Selection of Multi-Sized Proto Boards - 31 pieces double-sided prototype boards of 5 different size to meet your demands when designing your own Arduino kits, electronic experiments and DIY projects. （10 pieces 2*8cm, 10 pieces 3*7cm, 5 pieces 4*6cm, 5 pieces 5*7cm and 1 pieces 7*9cm PCB boards

Header Connector - 10 pieces 40 pin male header, 10 pieces 40 pin pitch right angle male headers, 10 pieces 40 pin female header; pitch: 2.54mm, single row and straight connector

Screw Terminal Block - 5 pieces 5.08-301-2P and 5 pieces 5.08-301-3P ; pitch: 5.08mm, rated voltage: 300V, rated current: 16A.

⭐【6 Different Sizes PCB Boards】Double Sided Prototype PCB Boards--1 × 9*7cm, 2 × 8*6cm, 5 × 8*2cm and 5× 7*5cm, 5 × 7*3cm, 5 × 5*4cm PCB Boards, Different Size to Meet Your Demands When Designing Your Own Electronic Projects, Electronic Experiments and DIY Projects.

⭐【Convenient for Projects】The upgrate 0.8mm solder wires, Semi-solid Flux, and High Temperature Marine Resistant Products, Providing Most Necessary Mounting Tools. It’s convenient to use.

⭐【Header Connector】6 pcs 40 pin Male Header, 4 pcs 40 pin Pitch Right Angle Male Headers, 6 pcs 40 Pin Female Header; Pitch: 2.54mm, Single Row and Straight Connector;

400 Points Breadboard with 2 Positive & Negative Power Lines on both ends.Perfect for Arduino Shield Prototyping and Testing.

Insertion Wire Size is 21 to 26 AWG, 0.016 to 0.028 inches diameter (0.4 to 0.7mm diameter),works with dupont jumper wires kit.

White ABS body with black printed legend. Color legend on distribution strips.

【Material】 Material: FR-4 Glass Fiber, Copper; Layers: Double-sided.

【Size】Dimension: 100x70mm/ 3.94x2.76 inch(L*W); Thickness : approx. 1.5mm.

【Applications】Great for making PCB Circuit Board, Models. Widely used in product development, DIY experiments, maintenance, production, etc.

Product name: Double-sided Copper Clad Laminate PCB Circuit Board 100x70mm 10x7cm 100mmx70mm FR4 1.5MM Thickness DIY PCB Board.

Material: FR4 glass.

Layers: double sided.

32 pieces double-sided prototype boards of 6 different size to meet your demands, for electronic experiments and DIY projects.

Pre-tinned plated holes on the board make it very handy to solder components and sensors for your projects.

4 mounting holes at the corners of the board are very convenient for installing them together.

BOJACK high quality 6 Vaules 40 Pcs Double Sided PCB Board Prototype Kit

The product contains six different sizes of circuit boards of circuit boards2*8CM,3*7CM,4*6CM,5*7CM,6*8CM,7*9CM.different size boards to meet your demands when designing your own Arduino kits, electronic experiments and DIY projects

4 mounting holes at the corners of the board are very convenient for installing them together.

Brand new design of the breadboard which have doubled the tie-point from the last version of the breadboard. With the additional ground rail running through the center of both regions was designed specially for integrated circuit and chip testing. The hole in lengthways on two sides was used providing power for the components on the breadboard.

Used among electronic experiments and point-to-point DIY soldering projects, can be expandable with pin header and female header, designing your own Arduino kits. The Breadboard Kit is convenient for the prototypes and circuit design experiment and other DIY projects. Perfect for Arduino, Raspberry Pi, and other programming boards.

Standard IC spacing 2.54MM hole plated through among the pad, Components and kits can be mounted variously on your will. Perfectly working with 3mm&5mm LED Diode kit, Electrolytic Capacitor kit, Monolithic Ceramic Capacitor kit, Resistor kit, etc.

The Package comes with (12 pcs/a dozen) double sided pcb prototype board, they are in 3 colors, includes: 6 pcs Green proto board, 3pcs Red proto board, 3pcs Blue proto board

The size of printed circuit board : 3cm X 7cm(1.181" X 2.755"); The weight of one piece universal printed circuit board: 6.1g/0.22oz

The pcb board is double sided, with the plated holes are pre-tinned, the hole diameter of the prototype circuit board is about: 1 mm/0.039", The hole number of printed circuit universal breadboard is: 240

PCB Board: 34 pcs double sided PCB Proto Boards, 6 different sizes, 10 pcs 2*8cm, 10 pcs 3*7cm, 5 pcs 4*6cm, 5 pcs 5*7cm, 2 pcs 6*8, 2 pcs 7*9 PCB boards.

Resistors: 10 kinds of resistors, 10Ω, 100Ω, 220Ω, 330Ω, 1KΩ, 2KΩ, 5.1KΩ, 10KΩ, 100KΩ, 1MΩ, 10pcs of each one.

Header Connector: 5 pcs 40 pin male header, 5 pcs 40 pin pitch right angle male headers, 5 pcs 40 pin female header; pitch: 2.54mm, single row and straight connector.

This Copper Clad Plated Printed Board is desgined For Etch Etching Project.

Double sided Copper Clad with small size 7x10 cm(4" x 2.7"),Thickness 1.5mm-0.059".

Packed with Bubble Bag Protecting Bag to Prevent Copper Scratch. 10pcs Copper Boards Kits Delivered in their Best Conditon.

The features of this board is that you don't have to insert the pins of components and kits in the group of holes. Components and kits can be mounted variously on your will.

Used for electronic experiments and point-to-point DIY soldering projects, can be expandable with pin header and female header, designing your own Arduino kits. The Breadboard Kit is convenient for the prototypes and circuit design experiment and other DIY projects. Perfect for Arduino, Raspberry Pi, and other programming boards.

Standard IC spacing 2.54MM hole plated through among the pad can be perfectly working with 3mm&5mm LED Diode kit, Electrolytic Capacitor kit, Monolithic Ceramic Capacitor kit, Resistor kit, etc.

Product name: double-sided PCB board;Hole DIA.(Each): 1mm

Hole Pitch: 2.54mm;total Size: 10x 15cm(W*l)

Mounting Hole DIA.: 2mm/0.08 inch

30 rows of double 5-hole rows

4 power rails with positive/negative markings

Dimensions: 51mm x 81.5mm

🔬[Universal Prototype PCB Board]: Wide range choice for your electronics experiments, DIY projects, and prototype designs

🔬[10PCS Pre-Drill Tinned Plated PCB]: Allow you to solder electrical components anywhere you like in the board and without worry run out the prototype PCB boards

🔬[Manufacture Industrial Material]: Winscon PCB prototype board is made of 1.6mm thick solid and strong high-quality glass fiber(FR4), same FR4 material board used in PCB factory

[Productivity] Pairs of pre-connected copper pattern help you to make working circuits in a shorter time with less effort

[Additional Patterns for Power Supply] Each component on the QuickStep Board can be powered easily from nearest spot of power lines

[Sturdiness] QuickStep Boards are made with 1.6T(0.063in) fiber reinforced epoxy(FR-4)

Standard 0.1" pitch hole pattern for quick and easy circuit board prototyping with many standard electronic components. Works great with Arduino and other electronic starter kits.

.040" Diameter fully plated through holes are used across the perf boards. This type of PCB board allows for high strength solder joints that electrically connect both sides of the circuit board.

0.125" Mounting holes are located in each of the four corners of the prototyping board. These holes allow for easy mounting of the PCB within any project.

This glass fiber PCB double-sided board is an electronic board arranged according to the standard IC spacing (2.54mm). Suitable for point-to-point DIY soldering, electronic projects, circuit design/testing, computer boards, and teaching circuits. Specially designed for beginners to test and learn.

The prototyping boards we provide here are in the size of: Dimension: 20mm x 80mm / 0.79 x 3.15 inch (W*L); Thickness: 1.6mm / 0.06 inch; Tinned Hole Diameter: 1mm / 0.04 inch; Tinned Hole Pitch: 2.54mm / 0.1 inch

Made of FR-4 glass fiber, double sided with tinned through holes. The boards are durable and the tinned holes can take heat without lifting off. The green layer on the surface of the board is used to protect the formed circuit diagram.

Product name: double-sided PCB board;Hole DIA.(Each): 1mm

Hole Pitch: 2.54mm;total Size: 9 x 15cm(W*l)

Mounting Hole DIA.: 2mm/0.08 inch

Type: FR-4 Glass Epoxy / Thickness: 0.062" 62 mil (1.6mm) / Copper: 1oz Double Sided (1.4 mil)

Size: 21"x24" (530mmx610mm)

Package Quantity: 1 board

【treated with flux】 These universal boards are treated with flux for easy soldering and can extended the serving life.

【perfect for point to point soldering 】 This universal circuit board is used for point to point DIY soldering,neat holes can help you to improve your efficiency.

【referencing numbers printed 】 There are referencing numbers printed on both sides of these universal PCB for easy reference of individual holes, more convenient to use.

Double-sided PCB board

Hole Pitch: 2.54mm; Size: 4 x 6cm/ 1.6" x 2.4"(W*L)

Hole DIA.(Each): 1mm; Mounting Hole DIA.: 2mm/0.08 inch