Best Aluminum Prototyping Boards in 2026

★32 pieces double sided PCB prototype boards well packed in a plastic tray which is very easy to store and take out

★5 different size boards to meet your demands when designing your own Arduino kits, electronic experiments and DIY projects

★4 mounting holes at the corners of the board are very convenient for installing them together.

✔️3220 Test Points, 4 Binding Posts, 560 U-shape pure copper jumper wires + 65 Pack 24AWG Breadboard Solid Multi colors pure(100%) Copper Jumper Wires Kit

✔️7 Power Lanes, Tie-point 700; 4 Double Strips, Tie-point 2520;

✔️ABS Plastic housing, metal contact clips; Accept wire with diameter 20-29AWG;Black aluminum plate

400 Points Breadboard with 2 Positive & Negative Power Lines on both ends.Perfect for Arduino Shield Prototyping and Testing.

Insertion Wire Size is 21 to 26 AWG, 0.016 to 0.028 inches diameter (0.4 to 0.7mm diameter),works with dupont jumper wires kit.

White ABS body with black printed legend. Color legend on distribution strips.

✔️1660 Test Points In Total(including 2 terminal strips 1260 tie-point and 4 bus strips 400 tie-point) & 3 Binding Posts

✔️Will Accommodate Up To (18) 14pin DIP ICs, or (15)16 pin DIP ICs.

✔️ABS Plastic Housing, Aluminum Back Plate,Metal Contact Clips; Accept Wire With Diameter 20-29AWG;

2200 tie points (insertion holes) total: 1800 tie-point circuit area, four 100 tie-point distribution strips providing 8 power rails

Standard 0.1" (2.54mm) pitch for easy IC mounting; Externally power connectors; Aluminum rugged back plate

Nickel silver alloy pins are pre-stressed, spring loaded and non-corrosive for long term reliability; White plastic body with printed row and column for easy counting

Brand new design of the breadboard which have doubled the tie-point from the last version of the breadboard. With the additional ground rail running through the center of both regions was designed specially for integrated circuit and chip testing. The hole in lengthways on two sides was used providing power for the components on the breadboard.

Used among electronic experiments and point-to-point DIY soldering projects, can be expandable with pin header and female header, designing your own Arduino kits. The Breadboard Kit is convenient for the prototypes and circuit design experiment and other DIY projects. Perfect for Arduino, Raspberry Pi, and other programming boards.

Standard IC spacing 2.54MM hole plated through among the pad, Components and kits can be mounted variously on your will. Perfectly working with 3mm&5mm LED Diode kit, Electrolytic Capacitor kit, Monolithic Ceramic Capacitor kit, Resistor kit, etc.

✔️1660 Test Points In Total(including 2 terminal strips 1260 tie-point and 4 bus strips 400 tie-point) & 3 Binding Posts

✔️350 U-shape 0.6mm +/- 0.02mm tolerance in diameter pure copper jumper wires + 65 Pack 24AWG Breadboard Solid Multi colors pure(100%) Copper Jumper Wires Kit

✔️ABS Plastic Housing, Aluminum Back Plate,Metal Contact Clips; Accept Wire With Diameter 20-29AWG;

PCB Board: 34 pcs double sided PCB Proto Boards, 6 different sizes, 10 pcs 2*8cm, 10 pcs 3*7cm, 5 pcs 4*6cm, 5 pcs 5*7cm, 2 pcs 6*8, 2 pcs 7*9 PCB boards.

Resistors: 10 kinds of resistors, 10Ω, 100Ω, 220Ω, 330Ω, 1KΩ, 2KΩ, 5.1KΩ, 10KΩ, 100KΩ, 1MΩ, 10pcs of each one.

Header Connector: 5 pcs 40 pin male header, 5 pcs 40 pin pitch right angle male headers, 5 pcs 40 pin female header; pitch: 2.54mm, single row and straight connector.

✔️3220 Test Points In Total(including 4 terminal strips 2520 tie-point and 7 bus strips 700 tie-point) & 4 Binding Posts

✔️ABS Plastic Housing, Blue Aluminum Back Plate, Brass(copper) Contact Clips; Accept Wire With Diameter 20-29AWG;

✔️Clear Red/blue line and number mark; Support header pin.

DIN Rail Mounting Carrier Housing with Prototype Board, for DIN Rail Projects DIY.

Carrier Housing: for 35mm, 32mm or 15mm DIN rail.

External dimensions: L50mm x W87mm x H30mm / 1.97" x 3.43" x 1.18"

✔️1660 Test Points In Total(including 2 terminal strips 1260 tie-point and 4 bus strips 400 tie-point) & 3 Binding Posts

✔️560 U-shape (24AWG) pure copper jumper wires + 65 Pack 24AWG Breadboard Solid Multi colors Jumper Wires Kit + 5pcs Toolless Stackable Banana Plug to pure(100%) Copper Jumper wires (male)

✔️ABS Plastic Housing, Aluminum Back Plate,Metal Contact Clips; Accept Wire With Diameter 20-29AWG;

✔️1660 Test Points In Total(including 2 terminal strips 1260 tie-point and 4 bus strips 400 tie-point) & 3 Binding Posts

✔️ABS Plastic Housing, Aluminum Back Plate,Copper Contact Clips inside breadboard; Accept Wire With Diameter 20-29AWG;

✔️Will Accommodate Up To (18) 14pin DIP ICs, or (15)16 pin DIP ICs.

✔️3220 Test Points, 4 Binding Posts, 24AWG 560PCS U-shape pure copper jumper wires + 65 Pack 24AWG Breadboard Solid Multi colors Jumper Wires Kit + 5pcs Toolless Stackable Banana Plug to pure(100%) Copper Jumper wires

✔️7 Power Lanes, Tie-point 700; 4 Double Strips, Tie-point 2520;

✔️ABS Plastic housing, metal contact clips; Accept wire with diameter 20-29AWG;Black aluminum plate

【Parameter】Light Color: Pure White(6500K); Diameter: 50mm.

【Advantage】Long service life, low consumption, high brightness.

【Installation】This LED chip needs a heatsink for cooling. Apply thermal grease evenly on the bottom of the light source and the contact surface of the heatsink when installation.

Premium olderless breadboard ideal for testing, prototyping and experimentation

Contact Points: 840

Binding Posts: 3

Type: FR-4 Glass Epoxy / Thickness: 0.062" 62 mil (1.6mm) / Copper: 1oz Double Sided (1.4 mil)

Size: 21"x24" (530mmx610mm)

Package Quantity: 1 board

✔️1660 Test Points In Total(including 2 terminal strips 1260 tie-point and 4 bus strips 400 tie-point) & 3 Binding Posts

✔️ABS Plastic Housing, Aluminum Back Plate,Copper Contact Clips inside breadboard; Accept Wire With Diameter 20-29AWG;Will Accommodate Up To (18) 14pin DIP ICs, or (15)16 pin DIP ICs.

✔️560 PCS Jumper Wires: 24 AWG; Copper solid wires; male to male;Pre-cut, pre stripped and pre-formed on each end. Each box contains 560 wires with 14 different lengths. - 2, 5, 7, 10, 12, 15, 17, 20, 22, 25, 50, 75, 100, and 125mm - 40 pieces of each.

♔11 pieces single-sided PCB prototype boards in 4 different sizes,including 1pcs 3.9"x8.7",2pcs 3.5"x5.9",3pcs 2.8"x3.5",5pcs 2.0"x2.8".

♔Circuit board is very strong and durable, and a tin plating process makes the welding component easier.

♔4 mounting holes at the corners of the board are very convenient for installing them.

✔️3220 Test Points In Total(including 4 terminal strips 2520 tie-point and 7 bus strips 700 tie-point) & 4 Binding Posts

✔️ABS Plastic Housing, Blue Aluminum Back Plate, Brass(copper) Contact Clips; Accept Wire With Diameter 20-29AWG;

✔️Clear Red/blue line and number mark; Support header pin. Binding Posts Coded Black, Red and Green, Coloured Coordinates for Easy Component Placement

Long service life, low consumption, high brightness.

Light Color:Pure White(6500K);Diameter: 85mm

Widely used in Traffic lighting, Landscape lighting, advertising lighting, Indoor Lighting, Special lighting,Landscape scene / spot lighting,Architectural lighting,Display scene,Artwork lighting,general lighting,Amusement park scene,Aquarium lighting and so.