Best Makeronics in 2026

✔️[22 in 1 Kit] The Back Probe Lead Set includes 15pcs Back Probe Pins & 5pcs Banana Plug to alligator clip circuit test wires(39.37inch/ 1m length) and 2 pcs Nickel plated copper Alligator clips.

✔️[Back Probe] 15 PCS Back Probe. 3 Types ( 90 degree, 135 degree, Straight) Stainless Steel Probes. Testing Up To 30 Volts For Connectors, Fuel Injectors and Automotive Sensors.

✔️[Banana Plug to Alligator Clips] Copper Alligator Clips. Standard 4mm Banana Plug. 5 Different Colors For Easy Identification.

✔️3220 Test Points, 4 Binding Posts

✔️7 Power Lanes, Tie-point 700; 4 Double Strips, Tie-point 2520;

✔️ABS housing, metal contact clips; Accept wire with diameter 20-29AWG;Black aluminum plate

✔️3220 Test Points, 4 Binding Posts, 560 U-shape pure copper jumper wires + 65 Pack 24AWG Breadboard Solid Multi colors pure(100%) Copper Jumper Wires Kit

✔️7 Power Lanes, Tie-point 700; 4 Double Strips, Tie-point 2520;

✔️ABS Plastic housing, metal contact clips; Accept wire with diameter 20-29AWG;Black aluminum plate

✔️1660 Test Points In Total(including 2 terminal strips 1260 tie-point and 4 bus strips 400 tie-point) & 3 Binding Posts

✔️Will Accommodate Up To (18) 14pin DIP ICs, or (15)16 pin DIP ICs.

✔️ABS Plastic Housing, Aluminum Back Plate,Metal Contact Clips; Accept Wire With Diameter 20-29AWG;

2V to 39V .0.5 Watt Zener Diodes Assortment Set (Pack of 30 Values, Each 10 Pieces, Total 300 Pieces)

The assortments contain the following voltage: 2V 2.2V 2.4V 2.7V 3V 3.3V 3.6V 3.9V 4.3V 4.7V 5.1V 5.6V 6.2V 6.8V 7.5V 8.2V 9.1V 10V 11V 12V 13V 15V 16V 18V 20V 22V 24V 27V 30V 39V

These diodes are widely used as voltage references and as shunt regulators to regulate the voltage across small circuits.

✔️1660 Test Points In Total(including 2 terminal strips 1260 tie-point and 4 bus strips 400 tie-point) & 3 Binding Posts

✔️350 U-shape 0.6mm +/- 0.02mm tolerance in diameter pure copper jumper wires + 65 Pack 24AWG Breadboard Solid Multi colors pure(100%) Copper Jumper Wires Kit

✔️ABS Plastic Housing, Aluminum Back Plate,Metal Contact Clips; Accept Wire With Diameter 20-29AWG;

✔️20 PCS IRFZ44N; Transistor type: MOSFET;Transistor polarity: N-Channel

✔️Drain Source Voltage Vds:55V; Continuous Drain Current Id:49A

✔️Operating Temperature Max:175°C;Surface Mount Device: Through Hole Mounting

✔️3220 Test Points In Total(including 4 terminal strips 2520 tie-point and 7 bus strips 700 tie-point) & 4 Binding Posts

✔️ABS Plastic Housing, Blue Aluminum Back Plate, Brass(copper) Contact Clips; Accept Wire With Diameter 20-29AWG;

✔️Clear Red/blue line and number mark; Support header pin.

✔️1660 Test Points In Total(including 2 terminal strips 1260 tie-point and 4 bus strips 400 tie-point) & 3 Binding Posts

✔️560 U-shape (24AWG) pure copper jumper wires + 65 Pack 24AWG Breadboard Solid Multi colors Jumper Wires Kit + 5pcs Toolless Stackable Banana Plug to pure(100%) Copper Jumper wires (male)

✔️ABS Plastic Housing, Aluminum Back Plate,Metal Contact Clips; Accept Wire With Diameter 20-29AWG;

✔️1660 Test Points In Total(including 2 terminal strips 1260 tie-point and 4 bus strips 400 tie-point) & 3 Binding Posts

✔️ABS Plastic Housing, Aluminum Back Plate,Copper Contact Clips inside breadboard; Accept Wire With Diameter 20-29AWG;

✔️Will Accommodate Up To (18) 14pin DIP ICs, or (15)16 pin DIP ICs.

✔️3220 Test Points, 4 Binding Posts, 24AWG 560PCS U-shape pure copper jumper wires + 65 Pack 24AWG Breadboard Solid Multi colors Jumper Wires Kit + 5pcs Toolless Stackable Banana Plug to pure(100%) Copper Jumper wires

✔️7 Power Lanes, Tie-point 700; 4 Double Strips, Tie-point 2520;

✔️ABS Plastic housing, metal contact clips; Accept wire with diameter 20-29AWG;Black aluminum plate

【Wire Piercing Probe Clip】Red/Black; 1KV CATIII 10A; It can easily puncture the cable sheath for testing without cutting the cable sheath. It can be widely used for the non-destructive cable test in industrial, electronics, home and vehicle maintenance. Convenient to connect with multimeter testing probe.

【Heavy Duty Back Probe】5 pcs Straight & 5pcs 45° alligator clip to back probe needle tool. Angle of the pin allows for tough to reach area. Access Electrical Circuits from The Back side of Connectors.

【5KΩ Potentiometer】Can be used to simulate coolant temperature sensor signals, oil sensors and simulate ECU.

[Wire Piercing Probe Clip] Red/Black; 1KV CATIII 10A; It can easily puncture the cable sheath for testing without cutting the cable sheath. It can be widely used for the non-destructive cable testing in industrial, electronics, home and automotive.

[Insulation Piercing Clip Test Probe] PA-insulated, Grip the conductor to provide a more secure, hands-free connection than probe tips connections that may need to be left in place. Come with extra 8pcs interchangeable pen tips (4pcs nickel-plated copper and 4pcs gold-plated copper -- small enough to access the tightest of SMD equipment).

[Test Extension Lead] 1KV CATIII 20A; 3ft/39 inch; Both ends of this test leads are injection molded standard 4mm banana plugs. Straight plug to right angle plug. Perfect for testing with multimeters, clamp meters and other probes which has standard 4mm banana jack. It can connect a compatible electrical test meter to a device for testing.

【KEEP ALL YOUR TOOLS ORGANIZED】Black carrying case and 6-pocket roll up tool bag to organize your tools such as test lead and lest probes to keep everyone organized.

【SRS Connector】Test Lead Kit can be used to monitor Hall sensors, fuel injectors, solenoid valves, etc. SRS connector provided can simulate air bag and routed contracting device of safety belt to avoid accident or miss-judgment.

【5KΩ Potentiometer】Can be used to simulate coolant temperature sensor signals, oil sensors and simulate ECU.

[Wire Piercing Probe Clip] Red/Black; 1KV CATIII 10A; It can easily puncture the cable sheath for testing without cutting the cable sheath. It can be widely used about the non-destructive cable test in industrial, electronics, home and automotive.

[Insulation Piercing Clip Test Probe] PA-insulated, Grip the conductor to provide a more secure, hands-free connection than probe tips connections that may need to be left in place. Come with extra 8pcs interchangeable pen tips (4pcs nickel-plated copper and 4pcs gold-plated copper -- small enough to access the tightest of SMD equipment).

[Test Extension Lead] 1KV CATIII 20A; 3ft/39 inch; Both ends of this test leads are injection molded standard 4mm banana plugs. Straight plug to right angle plug. Perfect for testing with multimeters, clamp meters and other probes which has standard 4mm banana jack. It can connect a compatible electrical test meter to a device for testing.

💧[PH Meter] The pocket size digital PH pen is equipped with (ATC) auto temperature compensation function. No more need to worry about the temperature of to-be tested liquid. It can accurately determine pH value of the sample at any temperature in a range of 32°F - 140°F (0°C - 60°C). The tester can be calibrated with using Buffer Powder.

💧[TDS Meter] 3 in-1 TDS Meter Digital Water Tester, Accurate&Quick check heavy metal content, soluble salt content and temperature in the water which will be displayed on the screen in ppm (parts per million).

💧[EASY READING BIG BACKLIT LCD DISPLAY] : PH and TDS meters with double color Bigger Backlit LCD which allows wider angles of data reading and night reading.

【Heavy Duty】 It is safer to test CAT III 1000V &CAT IV 600V rated current 10A current, perfectly fitting all kinds of multimeters like digital multimeters, voltmeter, clamp meters and so on.

【Magnet Hanger Kit】Compatible with Fluke Multimeter; Hand free, make work easier and safer. allow you to hang the meter on nails, hooks, and so on.

【Non-Destructive Back Probes】The ends of both probes are 2mm. Just plug the test probes on the 2mm nickel-plated needles and then it can be used directly.

✔【Hard Case】fits different sizes digital multimeters: compatible for Fluke 117/115/116/114/113/106/107/101/102/103 Digital Multimeter and Fluke 87V 88V F15B+F17B+F18B+, With the removable foams, you can DIY the foams into different shapes for many multimeters. Also, the attachable strap in the middle helps fix the multimeter, no worries about falling out.

✔【Magnet Hanger Kit】Compatible for Fluke Multimeter; Hand free, make work easier and safer. allow you to hang the meter on nails, hooks, and so on.

✔【Piercing Probe】This Piercing Probe Supplied Together With a White Unique Cover(Adaptor) . Used to Pierce Small Cables, Using As Much Or As Little Pressure As Required.

【Heavy Duty】 It is safer to test CAT III 1000V &CAT IV 600V rated current 10A current, perfectly fitting all kinds of multimeters like digital multimeters, voltmeter, clamp meters and so on.

【Universal Compatible】With three different connectors that can be replaced: alligator clips, needle probes and mini-hooks, makes the test leads can meet different test needs.

【Non-Destructive Back Probes】The ends of both probes are 2mm. Just plug the test probes on the 2mm nickel-plated needles and then it can be used directly.

✔️1660 Test Points In Total(including 2 terminal strips 1260 tie-point and 4 bus strips 400 tie-point) & 3 Binding Posts

✔️ABS Plastic Housing, Aluminum Back Plate,Copper Contact Clips inside breadboard; Accept Wire With Diameter 20-29AWG;Will Accommodate Up To (18) 14pin DIP ICs, or (15)16 pin DIP ICs.

✔️560 PCS Jumper Wires: 24 AWG; Copper solid wires; male to male;Pre-cut, pre stripped and pre-formed on each end. Each box contains 560 wires with 14 different lengths. - 2, 5, 7, 10, 12, 15, 17, 20, 22, 25, 50, 75, 100, and 125mm - 40 pieces of each.

✔️3220 Test Points In Total(including 4 terminal strips 2520 tie-point and 7 bus strips 700 tie-point) & 4 Binding Posts

✔️ABS Plastic Housing, Blue Aluminum Back Plate, Brass(copper) Contact Clips; Accept Wire With Diameter 20-29AWG;

✔️Clear Red/blue line and number mark; Support header pin. Binding Posts Coded Black, Red and Green, Coloured Coordinates for Easy Component Placement

[Insulation Banana Plug Type Tip]1KV CATII,32A; PA-insulated, Grip the conductor to provide a more secure, hands-free connection than probe tips connections that may need to be left in place.

[Test Extension Lead] 1KV CATIII 19A; 3ft/39.4 inch; Both ends of this test leads are injection molded standard 4mm banana plugs. Straight plug to right angle plug. Perfect for testing with multimeters, clamp meters and other probes which has standard 4mm banana jack. It can connect a compatible electrical test meter to a device for testing.

[Plunger Mini-hooks] 2 Plunger Mini-hooks Mini-grabber (One Red + One Black) with 4mm Banana Plug Tip, Whole Length: 50cm (19.6 inch). With three different connectors that can be replaced: alligator clips and mini-hooks, makes the test leads can meet different test needs.

DIGITAL CIRCUIT BREAKER FINDER for a panel corresponding to the circuit to which an electrical outlet or fixture is connected

GFCI OUTLET TESTER includes a transmitter connected to the electrical outlet or fixture and a receiver to locate the correct breaker

VISUAL AND AUDIBLE INDICATORS are delivered when the correct breaker has been located

Circuit Breaker Tool Kit can help quickly and accurately locate the correct circuit breaker in a panel corresponding to the circuit to which an electrical outlet or fixture is connected

Digital Circuit Breaker Finder with GFCI Outlet Tester (Cat. No. ET310) receiver delivers clear visual and audible indications when the correct breaker has been located

Operates on 90-120V AC circuits

Voltbeat technology and continuous self-test - so you always know it is working

Upon detection, tip glows and beeper sounds

CAT IV 1000 V for added protection

This circuit breaker finder can quickly and accurately locate the correct circuit breaker in a panel corresponding to the circuit to which an electrical outlet or fixture is connected

GFCI tester consists of two parts: a Transmitter connected to the electrical outlet or fixture, and a Receiver used to scan the panel to locate the correct breaker

Receiver delivers clear visual and audible indications when the correct breaker has been located

Versatile Digital Multimeter - Accurately measures AC/DC Current, AC/DC Voltage, Capacitance, Frequency, Duty Cycle, Resistance, Diode, Continuity and Temperature

Thoughtful Design - Support Data Hold, Large LCD Backlit Screen, Auto Shut-off and Hanging Magnet, and Kickstand make the process of measurements easier. Professional level is reflected in some features include Auto-Ranging capability, and True RMS for measuring both AC Current and Voltage

Suitable For Many Occasions - This Multimeter is a golden partner to help to troubleshoot a variety of automotive and household electrical problems safely and accurately.

Accuracy: With 3/s Sampling Speed, this multimeter can accurately measure AC/DC Voltage, DC current (Not for AC current), Continuity, Amp, Resistance and Diode

Widely Used: This meter is capable of testing Household Outlets, Batteries (including 12V Automotive Battery), Continuity, Electrical Circuit, Fuses, Wires, Light Bulbs and Water Heaters

Multi-Feature: Large Backlight LCD Display with 3 ½ digits (1999 count) delivers your results clearly in dim light areas; Data Hold button holds a reading; Built-in Stand allows for hand free use; Low Battery Indication and Continuity Buzzer

VERSATILE DIGITAL MULTIMETER - Accurately measures AC/DC Voltage, DC Current, Resistance, and Diode. This Multimeter is a really useful tool for solving industrial and household electrical issues. Suitable for Household Outlets, Fuses, Batteries (including Vehicles), Automotive Circuit Troubleshooting, Charging System, Testing electronics in Cars etc.

TROUBLESHOOTING WITH Accuracy - This Multimeter has a sampling speed of 2 times per second; Built-in a backlight LCD display with 3 ½ digits (1999 count) 0.6”, and high polarity including negative and positive readings.

ENSURES SAFETY - Double ceramic fuse is anti-burn and protects from overloading.The silicone cover is able to protect the multimeter from failing damage and prevent electric shocks. And low battery indication will be displayed when battery power is low.

SAFETY FIRST: It will send out multiple alarms through sound and light. When the voltage is detected, the tip will send out red light and beep. When the higher the sensed voltage is, or the closer it is to the voltage source, it beeps at a higher frequency. At the same time, the screen will be red or green, red means high voltage and live wire are detected, green means low voltage and null wire are detected.

NON-CONTACT: With NCV inductive probe for AC voltage; Just place the tip near a terminal strip, outlet, or supply cord. When the tip glows red and the pen beeps, you know there's voltage present. The live wire detector can automatically detect the live or neutral wire. Ideal for breakpoint Test. Handy circuit tester for electricians, homeowners.

DUAL RANGE: Detects standard and low voltage (12-1000V AC / 48-1000V AC) for more sensitive and flexible measurements. Press the S button to adjust sensitivity and adapt low range for doorbells, thermostats, irrigation wiring etc.; The NCV sensor automatically recognizes the voltage and displays it on the bar graph.