Best Single Sided Pcb Prototyping Boards in 2026

★32 pieces double sided PCB prototype boards well packed in a plastic tray which is very easy to store and take out

★5 different size boards to meet your demands when designing your own Arduino kits, electronic experiments and DIY projects

★4 mounting holes at the corners of the board are very convenient for installing them together.

Selection of Multi-Sized Proto Boards - 31 pieces double-sided prototype boards of 5 different size to meet your demands when designing your own Arduino kits, electronic experiments and DIY projects. （10 pieces 2*8cm, 10 pieces 3*7cm, 5 pieces 4*6cm, 5 pieces 5*7cm and 1 pieces 7*9cm PCB boards

Header Connector - 10 pieces 40 pin male header, 10 pieces 40 pin pitch right angle male headers, 10 pieces 40 pin female header; pitch: 2.54mm, single row and straight connector

Screw Terminal Block - 5 pieces 5.08-301-2P and 5 pieces 5.08-301-3P ; pitch: 5.08mm, rated voltage: 300V, rated current: 16A.

⭐【6 Different Sizes PCB Boards】Double Sided Prototype PCB Boards--1 × 9*7cm, 2 × 8*6cm, 5 × 8*2cm and 5× 7*5cm, 5 × 7*3cm, 5 × 5*4cm PCB Boards, Different Size to Meet Your Demands When Designing Your Own Electronic Projects, Electronic Experiments and DIY Projects.

⭐【Convenient for Projects】The upgrate 0.8mm solder wires, Semi-solid Flux, and High Temperature Marine Resistant Products, Providing Most Necessary Mounting Tools. It’s convenient to use.

⭐【Header Connector】6 pcs 40 pin Male Header, 4 pcs 40 pin Pitch Right Angle Male Headers, 6 pcs 40 Pin Female Header; Pitch: 2.54mm, Single Row and Straight Connector;

This Copper Clad Plated Printed Board is desgined For Etch Etching Project.Single Sided (SS) Blank Copper on the Front, Bakelite on the Back.10 pcs a Pack.

With Small Size 7x10 cm - 2.7" x 4" (W*L), 1.6mm - 0.062" Thickness, Weight in 15g 0.5oz Each.10 pieces epoxy Brown 4 x 2.7 inch

Packed with Moisture Protecting Bag to Prevent Copper Rust. 10pcs Bare Boards Kits Delivered in their Best Conditon.

400 Points Breadboard with 2 Positive & Negative Power Lines on both ends.Perfect for Arduino Shield Prototyping and Testing.

Insertion Wire Size is 21 to 26 AWG, 0.016 to 0.028 inches diameter (0.4 to 0.7mm diameter),works with dupont jumper wires kit.

White ABS body with black printed legend. Color legend on distribution strips.

✅This board is especially useful for preserving a prototype or experiment you just created on a solder-less breadboard by soldering all the pieces in place.

✅Suitable for a variety of MCU boards, compatible with Arduino Nano, ESP8266, NodeMCU, etc;suitable for various DIP type components; suitable for any type of Raspberry Pi GPIO breadboard PCB.

✅Gold plated finish to prevent oxidation, high quality gold finish for easy soldering,and all holes are through-plated for mounting strength

These boards are pre-coated and the rows and columns are labeled (a-x & 1-18), very easy to use.

Solderable on both sides so you can make it easier to follow your circuits. Perfectly flat, all holes drilled clean.

The glass fiber PCB boards are thick and sturdy and they do not melt when solder is applied.

BOJACK high quality 6 Vaules 40 Pcs Double Sided PCB Board Prototype Kit

The product contains six different sizes of circuit boards of circuit boards2*8CM,3*7CM,4*6CM,5*7CM,6*8CM,7*9CM.different size boards to meet your demands when designing your own Arduino kits, electronic experiments and DIY projects

4 mounting holes at the corners of the board are very convenient for installing them together.

♔This product is a five-holes single sided circuit board, and the perforated board is more suitable for analog circuits and discrete circuits.

♔The size is 90x150x1.2mm/3.54”x5.9”x0.05”,Diameter of holes: 1mm Distance between holes: 2.54mm.

♔The material is all FR4 full glass fiber plate, which can effectively prevent the pad from falling off.

♔Product size is 50mm X 100mm, pitch of 2.54mm, a pore size of 1.00mm, 1.3mm thick single-sided stripboard material is copper.

♔The product is a strip circuit board about 2 joints,3 joints and 5 joints stripboard and the perforated board,a good assortment to meet your design demands such as electronic experiments and DIY projects.

♔ Durable: made from high quality glass fiber FR4 material, with 1.3mm thickness makes it solid and sturdy

【Material】 Material: FR-4 Glass Fiber, Copper; Layers: Single-sided.

【Size】Dimension: 200x150mm/ 7.87x5.91 inch(L*W); Thickness : approx. 1.5mm.

【Applications】Great for making PCB Circuit Board, Models. Widely used in product development, DIY experiments, maintenance, production, etc.

PCB Board: 34 pcs double sided PCB Proto Boards, 6 different sizes, 10 pcs 2*8cm, 10 pcs 3*7cm, 5 pcs 4*6cm, 5 pcs 5*7cm, 2 pcs 6*8, 2 pcs 7*9 PCB boards.

Resistors: 10 kinds of resistors, 10Ω, 100Ω, 220Ω, 330Ω, 1KΩ, 2KΩ, 5.1KΩ, 10KΩ, 100KΩ, 1MΩ, 10pcs of each one.

Header Connector: 5 pcs 40 pin male header, 5 pcs 40 pin pitch right angle male headers, 5 pcs 40 pin female header; pitch: 2.54mm, single row and straight connector.

Type: FR-4 Glass Epoxy / Thickness: 0.062" 62 mil (1.6mm) / Copper: 1oz Single Sided (1.4 mil)

Size: 12"x18" (300mmx455mm)

Package Quantity: 1 board

Pcb prototype board, the proto boards are in the color of Red

Material: 94HB Bakelite Prototyping Board

FEATURES - The proto boards are thick and single sided. The plated holes are pre-coppered and very solid which make them very easy to solder components on.

Package of 10 single-sided 5cm x 7cm copper plated Printed Circuit Boards (PCB) for point to point DIY soldering, breadboarding and prototyping

432 copper-plated holes (24 x 18), 1mm hole diameter, 2.54mm hole pitch

Front side holes are copper plated, reverse side are unplated

【treated with flux】 These universal boards are treated with flux for easy soldering and can extended the serving life.

【perfect for point to point soldering 】 This universal circuit board is used for point to point DIY soldering,neat holes can help you to improve your efficiency.

【referencing numbers printed 】 There are referencing numbers printed on both sides of these universal PCB for easy reference of individual holes, more convenient to use.

These PCB boards are great for assembly of a point to point style electronics board. Suitable for countless small electronics projects such as building a robot. If you are working with hobby electronics and want a more permanent circuit solution but don't want to design your own PCB, these are great for you!

The prototyping boards we provide here are in the size of: Dimension: 60mm x 80mm / 2.36 x 3.15 inch (W*L); Thickness: 1.6mm / 0.06 inch; Tinned Hole Diameter: 1mm / 0.04 inch; Tinned Hole Pitch: 2.54mm / 0.1 inch

They are made of FR-4 glass fiber, double sided with tinned through holes. This is a fast easy way to build small projects, the boards are durable and the tinned holes can take heat without lifting off.

* Product Name: PCB Copper Clad Board; Dimension : 200x150mm /7.87x5.91 inch(L*W); Material : FR4 Glass Fiber; Copper ; Thickness : approx. 1.5mm.

* Great for building a prototype of an electronic circuit, single side copper PCB; Package content: 5 x Copper PCB Board.

* 5Pcs 200x150mm Single-Sided Copper Clad Laminate PCB Circuit Board FR4 1.5mm Thickness DIY Prototyping PCB Board.

♔11 pieces single-sided PCB prototype boards in 4 different sizes,including 1pcs 3.9"x8.7",2pcs 3.5"x5.9",3pcs 2.8"x3.5",5pcs 2.0"x2.8".

♔Circuit board is very strong and durable, and a tin plating process makes the welding component easier.

♔4 mounting holes at the corners of the board are very convenient for installing them.