Best Hosyond in 2026

0.96 inch,Resolution: 128 x 64, View angle: > 160°, Support voltage: 3.3V-5V DC, Power consumption: 0.04W during normal operation, full screen lit 0.08W

Embedded Driver IC: SSD1306. Communication: I2C/IIC Interface, only need two I / O ports

It compatibles with R3 board and Mega, Raspberry pi, 51 MCU, STIM 32, etc.

This is a 5" 800x480 Touch Display Panel,IPS LCD Capacitive Screen that you can touch in sensitivity.

Built-in OSD menu adjustment function that you can adjustable contrast/brightness/saturation, etc.Also can turn off by the power button.

There is a 3.5mm jack that you can use a earphone to play audio, and the HDMI interface makes sure to output HD.

7inch capacitive touch screen, 1024x600 resolution, IPS full angle display, with the characteristics of real and vivid color display and excellent dynamic image quality. tempered glass touch panel, supports five -point touch.

Perfectly adapt to the Raspberry Pi. The packaging comes with the Raspberry Pi 3B/4B adapters, making the screen and the motherboard connect more convenient. Also you can use it with other mainstream development boards such as Banana Pi, BB BLACK etc.

Support audio output, with portable stereo dual speakers and 3.5 mm headphone jacks, which provides excellent audio experience. In addition you can easily adjust the volume and brightness settings by the dial switch.

7’’ IPS LCD standard display, 1024 × 600 Hardware resolution, Up to 1920x1080 software configuration resolution.

Capacitive touch screen, maximum support 5 point touch.Support backlight control alone, the backlight can be turned off to save power.

Not only Support Raspberry Pi, BB Black, Banana Pi and other mainstream mini PC,but also can be used as general-purpose-use HDMI monitor, for example: connect with a computer HDMI as the sub-display.

Not only it is easy to program for this controller by using the CP2102-USB interface,but also unnecessary to press the flash and reset buttons before each flash operation.

NodeMcu is an open source Lua based firmware for the ESP8266, ultra low cost wireless modules, development boards for rapid prototyping, integrated with ESP8266 chips.

The ESP8266 has powerful on-board processing and storage capabilities, and can be integrated with sensors and other application-specific devices through its GPIOs.

[Applications] SG90 9G servo motor, compatible with RC helicopters, micro robots, robot arm and ships etc. Support various remote control toys and Arduino project

[Interface type] This SG90 servo is compatible with JR & Futaba interface

[Operating speed] 0.12 second/ 60degree ( 4.8V no load), 0.1 second / 60degree ( 6.0V no load), Max rotation angle:180 degrees

The MG996R servo motor offers an increase in speed, tension and precision over the SG90 and MG90S micro servo motors. This high-speed standard servo motor can rotate 180 degrees (90 in each direction).

MG996R is compatible with most standard receiver connectors, suitable for Futaba, Hitec, Sanwa, GWS, etc. It is a digital standard servo with excellent performance.

MG996R servo torque is 4.8V 13.5kg/cm, 6V 15.2kg/cm. Positioning speed: 4.8V no-load 0.17s/60 degrees; 6.0V no-load 0.15s/60 degrees. Recommended voltage: 5V, current use: 3A.

PCB Board: 34 pcs double sided PCB Proto Boards, 6 different sizes, 10 pcs 2*8cm, 10 pcs 3*7cm, 5 pcs 4*6cm, 5 pcs 5*7cm, 2 pcs 6*8, 2 pcs 7*9 PCB boards.

Resistors: 10 kinds of resistors, 10Ω, 100Ω, 220Ω, 330Ω, 1KΩ, 2KΩ, 5.1KΩ, 10KΩ, 100KΩ, 1MΩ, 10pcs of each one.

Header Connector: 5 pcs 40 pin male header, 5 pcs 40 pin pitch right angle male headers, 5 pcs 40 pin female header; pitch: 2.54mm, single row and straight connector.

Resolution: 128 x 32 0.91 Inch OLED display, no need backlight, self-illumination, Display Color: White.

Low power consumptio; SSD 1306 oled display; I2C oled display, IIC (I2C communications) simplifies connection.

Compatible with Arduino nano, R3 board, Raspberry Pi 4B/3B+/3B/2B/Zero,ESP8266, ESP32, STM32, etc.

3.5-inch color screen, supports 16BIT RGB 65K color display, rich in color display.

480X320 resolution, touch function, with touch pen.

Using the SPI serial bus, only a few IOs are needed to light up the display. With SD card slot, it is convenient to expand the experiment.

Free PDF tutorial(more than 22 lessons) and clear listing in a nice package

The most economical kit based on Arduino platform to starting learning electronics for those beginners who are interested.

Lcd1602 module with pin header (not need to be soldered by yourself)

Broadcom BCM2711, quad-core Cortex-A72 (ARM v8) 64-bit SoC @ 1. 5GHz---4GB LPDDR4-2400 SDRAM

2. 4 GHz and 5. 0 GHz IEEE 802. 11B/g/n/ac Wireless LAN, Bluetooth 5. 0, double-true Gigabit Ethernet

2 × USB 3. 0 ports, 2 x USB 2. 0 Ports---2 × micro HDMI ports supporting up to 4Kp60 video resolution

The Mega is 100% compatible with Arduino IDE and most of the shields are designed for the Arduino mega R3，RoHS Compliant

The chip is Atmega + 2560-16au and 16u2, same with the official version.

Improved and expert version: 1. 0 pinout: added SDA and SCL pins that are near to the AREF pin

USB-C Connector for the latest Raspberry Pi 4 Model B

DC 5. 1V 3 Amp Power Supply

15. 3 watts, 1. 5M cable (18AWG)

The Mega is 100% compatible with Arduino IDE and most shields designed for the Arduino mega R3，RoHS Compliant

The chip is Atmega+2560-16au and 16u2, same with the official version.

Improved and expert version: 1. 0 pinout: added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board. In future, shields will be compatible both with the board that use the AVR, which operate with 5V and with the Due that operate with 3. 3V. The second one is a not connected pin, that is reserved for future purposes.

5V 2-Channel Relay interface board, and each one needs 15-20mA Driver Current

Equiped with high-current relay, AC250V 10A ; DC30V 10A

Standard interface that can be controlled directly by microcontroller (compatible with Arduino ,Raspberry Pi, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)

powful cputhe cpu of the raspberry pi 4 model b adopts the latest arm cortex-a72 architecture, which is also used in high-performance smartphones, and has evolved into a real pc.the operating clock has been changed from pi3's 1.2ghz to 1.5ghz, and the speed has become a different dimension with the updated architecture.

video output/gputhe on-board gpu of the raspberry pi 4 supports 4kp@60 and newly supports h.265 decoding, opengl es 3.0, etc.as for the video output, two micro hdmis with smaller connectors are installed, and the raspberry pi 4 also supports dual screen output.

usb 3.0with a new soc, the speed of the raspberry pi 4 around i/o has been improved, and finally usb 3.0 is supported.usb boot is faster and more convenient.

The controllers are easy to program by using the CP2102-USB interface without having to press the flash and reset buttons before each flash operation.

The development board has integrating GPIO, PWM, IIC, 1-Wire and ADC all in one board. Support smart link smart networking.

The fast and affordable technology for WiFi. Make your development the fastest way combined with firmware for NodeMcu.

Clear prints on the female header connector, more precise and easier to use the wire.

The ELEGOO UNO R3 BOARD now uses an 16U2 instead of the ATMega8U2 chip. Faster transfer rates and more memory.

Control using ATMEL ATMEGA+328P chip(the same with Arduino UNO R3)

The MEGA complete starter kit with more than 200pcs components, premium quality and 100% Compatible with Arduino IDE

Free pdf tutorial in the cd (33 lessons)

Lcd1602 module and gy-521 sensor module with pin header ( no need to solder by yourself)

More than 200 components, this is the most complete starter kit you will find. Great value starter kit with 63 kinds of electronic components.

Has all the components you need and a free PDF tutorial (more than 30 lessons) to show you how to use them. All code to use the modules is included on the CD.

All the modules come soldered so they are easy to wire up.

Raspberry pi 3 model b adds wireless LAN and Bluetooth connectivity making it the ideal solution for powerful connected designs.

Raspberry pi 3 use Processor chipest Boardcom BCM 2837 64 bIT ARMv7 Quad Core processor powered Singel Board Computer running at 1200MHz

Raspberry pi 3 model b RAM : 1GB SDRAM@400MHz

This 7" Touchscreen display for the Raspberry Pi is perfect for creating portable and embedded projects where a keyboard and Mouse would be in the way.

The full color display outputs up to 800 x 480 and features a capacitive touch sensing capable of detecting 10 fingers.

Only two connections from the Pi TO the Display are necessary; power from GPIO (or USB) connection to the DSI port. The adapter board handles power, Signal conversion, and touch input conversion.

Raspberry Pi 3 Case Clear for Raspberry Pi 3 - Miuzei Clear Acrylic Raspberry Pi 3 B Case is Specially designed for Raspberry pi 3 B / 3 B+, and perfect compatible with Raspberry Pi 3 B / 3 B+ / 2B. Assembly easy for beginners and amateur.

Keep Raspberry Pi 3 Cooling - New Raspberry pi 3 B case with a Silence DC 5V cooling fan and 3 pcs Aluminum heatsinks, double cooling system keep your Raspberry pi 3 B+ cool quickly even the CPU under high load.

Raspberry Pi Power Supply - raspberry pi 3 case with a 5V 3A power supply which has an ON/OFF switch, easy to power on/off your Raspberry pi 3 b+ / 3 b / 2 b. No need to worry about overvoltage or overcurrent.

WIDE-RANGE COMPATIBLITY- This base plate case is compatible with Arduino R3, Mega2560 and Raspberry Pi 4B/3/2/B+,Pi zero as well as working with both 400 and 830 points breadboards.

SUPERIORLY DESIGNED SLOTS- The slots are specially designed for TF cards, HDMI and USB cords to be inserted without hindering the power connection.

WELL-CRAFTED DESIGN- The RAB Holder has a customized, sleek design that is attractive and is more comfortable to touch while working with it.

Unique Removable Top Cover Design, you can get in touch with the GPIO or Camera Connector Very Simple

With 40mm Quiet Cooling Fan, it can drop the temps for your Pi

Include Raspberry Pi 4 Heatsink, Better Cooling Experience

▶The Sunfounder breadboard kit fits perfectly for a Raspberry Pi 4B, 3B+, 3 Model B, 2 Model B and 1 Model B+ A+, an R3 or Mega 2560 compatible with Arduino.

▶With the high quality RAB Holder made of long-lasting polyethylene plastic, sturdy and lightweight, fixed on a flat table, enlarging the fun when you create experiments.

▶This 830-tie/point breadboard includes an IC area of 630 points, plus two 100-point distribution strips, providing 4 power rails.

Notice: We only provide after-sales service purchased from Seeed Studio

🌱【High-Performance CPU】Raspberry Pi Pico features Dual-core ARM Cortex M0+ processor, flexible clock running up to 133 MHz. With 264KB of SRAM, and 2MB of on-board Flash memory.

🌱【Multiple Software Support】Pico has rich and complete software support, it comes with a complete Rasberry Pi official C/C++ SDK, Micropython SDK.

Unleash Your Inner Maker with Our Upgraded Sensor Modules Kit - Packed with 37 essential components for your arduino projects!

Say Goodbye to Useless Modules - Our kit includes only the best, like the GY-521 accelerometer, LCD1602 screen, and DS1307 real time clock module, etc!

Learn with Ease - Our upgraded tutorial is designed specifically for UNO R3, MEGA R3, and NANO - Plus, we've included a CD and listing paper for your convenience!

Compared to NX8048T050, NX8048K050 add new functions: support built-in RTC, save data to Flash, GPIO, larger flash capacity and faster CPU.

You can power NX8048K050 from 5V pin of microcontroller but not recommended. Working with insufficient power may damage screen, so pls use power board came with nextion. See image on how to use it.

You need a USB to TTL adapter to plug nextion display into USB port.