Best Lcd Graphic Displays in 2026

💝【Main Control Chip】BIGTREETECH TFT35 E3 V3.0.1 touch screen adopts ARM Cortex-M3 series GD32F205VCT6 master controller with 32-bit main frequency of 120MHz, it is designed for ENDER 3 3d printer especially, which can perfectly replace the original LCD screen of Ender 3 Printer.

💝【Dual Modes】TFT35 E3 V3.0.1 touch screen display support UART serial port screen mode and 12864 screen mode support two printing Modes：SD Card and U disk with one catering the Marlin-style interface, and the other offering a full colour touch interface with the option to switch between them within seconds while the machine is running.

💝【Multi function expansion interface 】BIGTREETECH TFT35 E3 V3.0.1 is a 3D Printer Upgrade that offers both SD Card and USB functionality, reserve the extension port of filament breaking detection,automatic shutdown after printing，WIFI function can be realized by external WIFI module through WIFI port.

Viewing area size: 64.5mm x 16mm

Color: white on blue with backlight

Can display 2-lines X 16-characters

What will you get: there are 5 pieces OLED display module with classic display color, self-illuminated and no need backlight

Power-saving display: the I2C oled display performs better than the traditional LCD display and with lower consumption the IIC (I2C communications) simplifies connections; Please note that these I2C OLED display module comes without pin headers

More details: use compatible with Arduino, ESP8266, ESP32, STM32, etc.; 3.35v Power; Operating temperature: -40 - 85 ℃; Resolution: 128 x 32

1.3inch TFT LCD Screen Display Module:The TFT display provides a semiconductor switch for each pixel and each pixel is directly controlled by pulse. Therefore, each node is relatively independent and can be continuously controlled, which not only improves the response speed of the display, but also can be accurately controlled

Dot Size: 240*240 (There are two display way: horizontal display and vertical display, you can adjust the display direction.)

Working Voltage:3.3V; Working temperature: -20-70℃

5V compatible, use with 3.3V or 5V logic

Need at least 4 IOs from your MCU

Support Serial SPI Mode

This is a new 1.8 inch serial SPI color display module

Support analog SPI and hardware SPI. SPI serial, less I/O port need

Designed with one socket for sd card and PCB adapter for LCD

It is a 1.28 inch 240*240 IPS LCD Display Screen.It uses IPS color display screen and the display effect is more vivid than ordinary TFT LCD effect.

4Pin SPI Communication.

Adjustable Display Direction.

Ed510

Fireye ED510 display module, 2 line x 16 characters lcd display

Fireye

Includes LCD screen w/ fused glass, adhesive strip kit, & cutting wheel tool for safe removal of display.

Description: iMacs of this year range have glass that is fused to the LCD panel. This is the entire display unit.

Compatibility: iMac13,1 Late 2012 (MD093LL/A, MD094LL/A), Early 2013 (ME699LL/A)

User Manual:Adafruit_GFX:https://www.arduinolibraries.info/libraries/adafruit-gfx-library ; Adafruit ST7789:https://www.arduinolibraries.info/libraries/adafruit-st7735-and-st7789-library

1.3 inches colorful display lcd screen:This display is a thin film transistor type liquid crystal display and is true "Thin Film Transistor" (TFT)

Dot Size: 240*240 ( There are two display way: horizontal display and vertical display, you can adjust the display direction)

new products

4-digit LED display module with LED brightness adjustable and clock point.

Display device is a total of 4 red LED word tube. Digital tube 8 grayscale adjustable.

The driver IC is TM1637, only two signal lines can make MCU control four Digit 8-segment LED. Can be used to display decimal, letters and so on.

These fourteen-segment digits allow you to display all sorts of numbers, characters, and symbols. With Qwiic, simply plug it in and go. No soldering, no figuring out which is SDA or SCL, and no voltage regulation or translation required!

The SparkFun Qwiic Alphanumeric Kit comes with two displays, one red and one white. Also included in this kit are 10 standoffs and screws for mounting as well as two Qwiic cables to get up and running as fast as possible.

With a wide variety of Qwiic enabled microcontroller boards available we decided not to include one so you could choose the one that fits best with your current project needs.

This module is a dot-matrix TFT LCD module, composed of a TFT LCD Panel, driver ICs, FPC and a Backlight unit

1.69 inch LCD Display Module, IPS Screen, 240 (H) RGB x280 (V) Resolution, SPI Interface

Operating voltage: 3.3V (Please ensure that the power supply voltage and logic voltage are consistent, otherwise it will not work properly)

This lovely little display breakout is the best way to add a small, colorful, and very bright display to any project

Since the display uses 4-wire SPI to communicate and has its own pixel-addressable frame buffer, it can be used with every kind of microcontroller

The 1.69" display has 280x240 16-bit full color pixels and is an IPS display, so the color looks great up to 80 degrees off-axis in any direction