Best Bqlzr in 2025

Open toatl 150mm/5.91" ,close total 108mm/4.25''

Loosen in installation correction. Connect a string of lights in the backyard ,Tighten the clothesline.Increase or decrease tension by simple torque. The cable is straightened and tightened, and the chain is straightened and tightened. Use the lead screw to expand and contract to adjust the tightness of the wire rope

Vintage style bronze desk cover

Vintage style iron desk cover is a nice choice for corner

These "brackets" are purely decorative and do NOT provide any support. They come with tiny nails.can use needle-nosed pliers to hold them & tapped the brads in with a small hammer. Looks great, for decorating craft boxes.

you will receive very tiny nail type screws

good to detail, no burs or rough edges.

[Features] The plastic part design will not wear your painted partitions or wooden floors <br>The lightweight design of stainless steel, even if the body bumps against the stainless steel furniture feet, there will be no pain or injury <br>Smooth design of stainless steel material, you can paste your favorite drawings on the stainless steel part

Support Up to 220Lbs --Made of thicken stainless steel and high quality ABS base, these adjustable furniture legs help build a stable and strong furniture. No more wobble legs . Wise choice for both indoor / outdoor use or under humid environment, for your coffee table, sofa, kitchen sideboard, DIY furniture, cabinets, shelves and more.

[Note] 1,The furniture needs to be lifted instead of pushed and pulled when moving, which is beneficial to prolong the service life of the furniture feet2. Need to tighten the plastic thread part.3.Adjust the furniture to a suitable height for more comfortable use

This set of semi round hole tool make it a breeze to consistently have clean holes in clay walls. As they are semi round, the clay circles tool out of clay wall just simply fall to the table and no longer have to dig to get clay out of old totally round clay tools. The metal used is very light weight which makes them very comfortable to work with.

Can be used to make holes of different sizes in Halloween pumpkins. The sharp edges are great for piercing the pumpkin skin if the pumpkin skin isn't very hard

Great choice for professionals and students,high and low bass transform compactly, full of dynamic sense.

mallet head is made of good quality felt material, beige color, non-yellowing.

The stick body use maple material, anti-slip, sturdy and anti-deform, good touching feeling and great for grip.

The felt head core,will not fall off， has wood handle, tonal with enough up front attack for clarity

high and low bass transform compactly, full of dynamic sense.

Indispensable percussion instrument part for bass drum.

Total lenght(with end caps) :about 25cm/9.84 inch, Spare Handle Strap length:about 15.5cm/6.10 inch, Handle Wide:about 2.5cm/0.98 inch

Carefully pull back the liner, remove the old handle, put a flat washer on each screw to keep the bolt from going through the housing, tighten the screw, put the liner back in

Voltage: 12V, No-load speed: 25RPM, No-load current: 0.028AMP, Rated speed: 18RMP, Rated current: 0.098AMP, Rated torque: 2.33kg.cm 12V 0.5K 25RPM voltage regulator

Diameter: 32mm

these are All-Brass saddles,and with some vinegar and salt solution, soaked for a day, then rinsed in peroxide for 5-10 second or to desired looked

For smoothing it is recommended to use 1000 grit and some steel wool to put some polish on the product.

The included hardware, springs, machine screws and hex screws are of good quality and are metric.

The roller saddles help prevent string breakage, improve tone and sustain and keep your guitar in tune.

The handle is 2 inches long and the whole baton including the handle is 15 inches long.and perfectly straight

The batons are very light and seemingly sturdy, and sit pretty comfortably in my hand.

All the parts are a smooth plastic (baton is matte finish, handle is shinier)

They do chip quite easily if you are the type of person to hit it against a music stand in order to help people keep tempo. Good general conductor's batons they have a light feel and are ideal for large ensembles, the pear drop handle allows for relative comfort.

Product size information: 70 * 10 * 5mm

The appearance of the product is blue, which can make your product look better

Size:5x2.7cm, There may be an error of a few millimeters.

Vintage style iron desk cover is a nice choice for corner guard

[Easy to install]:This decorative belt is very easy to install and use. First unfold the interface strap,then adjust the port to fit the size of the Accordion,then adjust the length of the shoulder strap to fit you,and finally fix it on the Accordion for use.

[good assistant] A good shoulder strap for accordion, not only guard your accordion, but also allows you to rest. The accordion shoulder strap is durable and comfortable, a good assistant for your accordion practice and performance.

Please keep it in a ventilated place to better use.

264g in total.If you want to use it for pumpkins it is more difficult to carve and you have to use a lot of force to carve these.

Multifunctional: This engraving tool set is suitable for beginners engraving techniques, such as modeling, engraving,scratching, chipping, brushing and smoothing.

Size of Holder:10.5 x 2cm/4.13 x 0.79"(Length x Diameter)

Note: The sharpness of the tool will be affected after a period of use. If it is not sharp, it can be polished.

They are great for scraping wax to smooth or remove extra wax

The Thick Handles Feels Sturdy Enough In Hands Enjoy Using

From string to string measures 0.35" inch and from first to last measures 1.43"

Legged thickness:0.2"

[Instructions]: 3. The two support screws are evenly applied (turn clockwise), and the upper and lower support plates must be kept parallel.

[Instructions]: 4. The rotation of the screws on both sides should not be too large, preferably in units of 3/1 turn, and the two support screws should be applied separately.

[Notice]: 1. If the mouthpiece is too tight and cannot be twisted, you can put a piece of cloth to use force

[Notice]: 2. If it can't be screwed again, it can be easily pulled out with the help of pliers or wrench.

[Notice]: 3. Remember to make a maximum of 3/1 turn, and apply force to the screws on both sides respectively.

[Notice]: 4. In order to prevent scratches, it can be wrapped with cloth

[Sound]: The sound is crisp and the magnet type will determine the tone and dynamics.

[Size]: 280x224mm/11.02x8.81inch

Comes in pre-radiused these lengths for ease of install, neccessary to guitar players.

Fine machining ensures sleek surface and edge of the fret crown, won't harm the fretboard and strings.

Durable copper fret wire, suitable for DIY, great for new guitar building or guitar repair.Made of Brass maerial in gold tone, a great replacement to your guitar old/damaged fretwire

Quality sealed machine heads,Fit for Ukulele guitar.

Colour: Chrome.

The handle can be separated from the white plastic body that houses the hinge-lever mechanism by removing the single screw that holds them together. The space you gain from doing this may be only 5 to 7.5 mm. The brass lever itself cannot be separated from the white plastic body that it pivots in.

Compatible Toilet Tanks: CW844RB / CW864RB / CW854RB / CW764BT400 / SW764B / CW764BT305 SW764B / CW744RB / SW743B / CW744RBSW784B / CW745B / SW784B CW988BT305 / CW988BT400 / CW886BT305 / CW886BT400 / CW866B / CW867B

Log-shaped pillow, looks like a part of tree, wood pillow, feel is gentle.

Invisible zipper design, easy to clean the cover.

The zipper is located in the middle of the pillow length. Very good concealment. It is white and well integrated with the bark pattern. The size of the zipper is just enough for the filler to be removed

The pillow is round, 13.78 inches in diameter and 3.54 inches in height

fabric cover is soft to the touch, the foam is a litter hard ,It can be used to raise the height or thickness of seats, backrests and pillows

Commonly used for DIY small drilling machine, milling machine, small unpowered spindle of machine tool.

Suitable for 6MM optical axis installation, the top screw hole specification on the side of the boss is metric M4, arranged at 90 degrees

[Features] The plastic part design will not wear your painted partitions or wooden floors <br>The lightweight design of stainless steel, even if the body bumps against the stainless steel furniture feet, there will be no pain or injury <br>Smooth design of stainless steel material, you can paste your favorite drawings on the stainless steel part

[Note] 1,The furniture needs to be lifted instead of pushed and pulled when moving, which is beneficial to prolong the service life of the furniture feet2. Need to tighten the plastic thread part

Wiring method: Black and Bare were pre-soldered together for the ground, green and white were pre-soldered for the coils, and red was by itself for the hot signal out. The two colored wires that come soldered together are for coil splitting, if not splitting, simply fold it over and seal exposed wire so its protected from ground out on interior electronics. Install the same as existing wiring to pot or switch.

The hole spacing of the bridge pickup is 52mm, The hole spacing of the other pickup is 50mm

We offer thirty days return and replacement service

each coil have separate wires to connect to separate volume knobs. It is 2 coils with 4 wires.

Can't this be connected as an active pickup, it's possible to use it with an active preamp.is a passive pickup.It can be used without a preamplifier. To ensure that the pickup does not work in the case of proper connection, check to see if there is any damage inside it. Use a multimeter to measure the resistance. The normal resistance is around 12k ohms.

it comes with about 1/4" exposed wire to solder your connections

this set of tires come with foam inserts,Don't forget to glue the tires to the wheels before using.

Note:The tire and wheel rim are separated. High performance rubber tires must be mounted and glued to the wheel rim by yourself.

Note: you can open the bottle with it. don't recommend using it to open all your bottles. It hurts to open the bottle with the ring on your finger. When you can't find a bottle opener, this is more suitable for "emergencies" or to impress your friends. This is a novel thing, not suitable for daily use

Fun gadget for a party, wear, amaze your friends, make the jealous and then pull some from your pocket and give them to your friends: party is a hit right away

solid, good workmanship, no rough edges. Get things done quickly so you and your friends can drink more quickly without having to look for an opening line 4.They can be an excellent gift for friends who hold any sports and parties, and also provide convenience for bartenders

Well-constructed of stainless steel, you don't have to worry about breaking or crushing these rings. They won't tarnish, or turn your finger green.

<br>The total length is 24.5cm (9.64 inches), <br>Handle length 16cm (6.29 inches) <br>Inner hole distance: 17cm (6.69 inches), <br>Outer hole distance: 23cm (9.05 inches) <br>Metal mount size: 2.9cmx4.5cm (width * length) 1.14x1.77 inches, <br>Hole distance: 3.1cm (1.22 inches)