Best Kaish Electric Guitar Pick Guards in 2026

Fit for most Fender guitar or bass, Phillips ovalhead screws to fit countersunk pickguards and cover plates

Screw Head Diameter: 1/8 inch( 3mm)

Screw Length: 1/2 inch(12mm)，the standard for Fender

The Package Length of the Product is 30.48 centimeters

The Package Width of the Product is 24.13 centimeters

The Package Height of the Product is 2.54 centimeters

Ideal for electric guitar bass pickguard DIY. Enough for two Strat, Tele, J Bass or one P Bass pickguard custom

Plastic made, 2.0-2.2mm thickness, easy to cut

Size: 435*290*2.2mm (17*12 inch)

Genuine Fender Replacement Part

High Quality

Durable

11 screw holes in the side of pickguard, 3 single coil pickup holes were cut to fit American/Mexican Standard Fender Stratocaster.Back plate is as pictures shown.

Material: 4Ply constructions made of quality celluloid and PVC plastic material. Color: orange shell / white / black / white.

There are 2 layers thin protective film on the front surface of the pickguard, peel off after installation.

For guitar and bass. Good for DIY your own style guitar or repair your guitar.

Color: Black BWB

Size: approx. 11.6 x 17 x 0.09 Inch ( 29.5 x 43 x 0.23 cm ).

Shawbucker 1 Bridge and Gen 4 noiseless middle/neck pickups

Sb 1 - Alnico 2 magnets for sweet, musical sound

Low-output pickup with enamel-coated magnet wire for vintage-style tone

This Pickguard fits USA/Mexican Vintage 5 Hole Fender Telecasters,but not Fender Squier Teles or other types of Teles.If you have other types of Teles,you may need to make a little modification to let it fit

Important note: there are no mounting screw holes for the pickup; Pickguard is made of plastic acrylic, not Metal,it has plastic films which should be peeled off after installing

Thickness is about 2.6mm (+/- 0.2mm error, because different bulks materials might be varied a little different thickness)

Use this blank pickguard material sheet to cut your own guitar pickguards, enough for 2 Tele or 2 Strat or 2 Jazz Bass, 1 P-Bass of your own design and choice.

Dimenison: about 11"(length) x 17"(width) x 0.09"(thickness)/290mm x 435mm x 2.3mm. Thickness is about +/- 0.2mm error, because different bulks materials might be varied different thickness.

Material: 4Ply constructions made of quality celluloid and PVC plastic material. Color: smoky gray pearloid / black / white / black.

Awesome pickguard screws,evenly finished and snugged up well in some dense wood,the heads coating does not come off easily

When a guitar for replacement pickups or wiring replace their rusty screws with these new screws can really brighten up a guitar

The mounting screws vary quite a bit, so you definitely do need to pick through them and find the right size for the job,They are exact specs of any screw you find for pickguards and back plate covers

11 screw holes in the side of pickguard, 2 pickup holes (humbucker - humbucker) were cut to fit American/Mexican Standard Fender Stratocaster. Back plate is as pictures shown.

Material: 3Ply constructions made of quality PVC plastic material. Color: white / black / white.

There are 2 layers thin protective film on the front surface of the pickguard, peel off after installation.

Plate Material: Brass.Resonant Frequency: 1.8 +/- 0.3 KHz.

Resonant Impedance: less than or equal to 300 Ohms .Static Capacitance: 50000PF +/- 30%.

Lead Length: 10cm /3.94 Inch.

Material: Plastic, not Metal

The pickguard has plastic protective films on it

One humbucker and on pot hole for most Fender Delonge Strats

You can use these blank material sheets to customize any pickguards or covers by yourself.

Dimension is about 11"x17" (29x43cm); Sheet is made of plastic,it has plastic protective films which can be peeled off

Thickness is about 2.2mm (+/- 0.2mm error, because different bulks materials might be varied different thickness)

black 2ply

2-point closure

This pickguard fits American/Mexican Standard Fender Telecaster modern style guitar part, not Squier or any other Tele made in Asian country. If you have other types of Tele guitar, you may need a little modification for line up.

There are 8 screw holes in the side of pickguard and 2 screw holes for neck pickup. Due to the wide variety of pickguards in the market, please be sure to verify the dimensions carefully.

Material: 4Ply constructions made of celluloid and PVC plastic material. Color: aged pearloid / cream / black / cream.

11 screw holes in the side of pickguard, 2 pickup holes (humbucker - humbucker) were cut to fit American/Mexican Standard Fender Stratocaster.

Material: 4Ply constructions made of quality celluloid and PVC plastic material. Color: red tortoise shell / white / black / white.

There are 2 layers thin protective film on the front surface of the pickguard, peel off after installation.

11 screw holes in the side of pickguard, 3 pickup holes (single coil - single coil - humbucker) were cut to fit American/Mexican Standard Fender Stratocaster.

Material: 3Ply constructions made of quality PVC plastic material. Color: mint green / black / mint green.

There are 2 layers thin protective film on the front surface of the pickguard, peel off after installation.

8 screw holes in the side of pickguard, 3 single coil pickup holes were cut to fit American/Mexican Standard Fender Stratocaster. Back plate is as pictures shown.

Material: 4Ply constructions made of quality celluloid and PVC plastic material. Color: red tortoise shell / white / black / white.

There are 2 layers thin protective film on the front surface of the pickguard, peel off after installation.

Guitar pickups are suitable for replacement of guitars or similar instruments

The SSS guard plate is made of PVC and can be used for electric guitars

Made of hard PVC material, durable

11 screw holes in the side of pickguard, 3 pickup holes (humbucker - single coil - humbucker) were cut to fit American/Mexican Standard Fender Stratocaster. Back plate is as pictures shown.

Material: 3Ply constructions made of quality PVC plastic material. Color: mint green / black / mint green.

There are 2 layers thin protective film on the front surface of the pickguard, peel off after installation.

This Pickguard fits 11 hole standard Fender Jimi Hendrix Strats with a reversed bridge pickup route. If you have other types of Teles,you may need to make a little modification to let it fit

Pickguard is made of plastic, it has plastic films which should be peeled off after installation

Thickness is about 2.2mm (+/- 0.2mm error, because different bulks materials might be varied a little different thickness)

11 screw holes in the side of pickguard, 3 single coil pickup holes were cut

Material: 4Ply constructions made of quality celluloid and PVC plastic material. Color: aged pearloid / cream / black / cream.

There are 2 layers thin protective film on the front surface of the pickguard, peel off after installation.

Compatible with American strat style guitars (can also work on 11 holes Mexico strats).

Made to current 11 holes, please refer to the size picture before buying this item.

3-Ply electric guitar pickguard, SSS single coil configuration.

This Pickguard fits USA/Mexican Standard Fender Telecasters,but not Fender Squier Teles or other types of Teles.If you have other types of Teles,you may need to make a little modification to let it fit

Important note: there are only 2 (not 3) mounting screw holes for the humbcuker pickup; Pickguard is made of plastic, it has plastic films which should be peeled off after installing

Thickness is about 2.2mm (+/- 0.2mm error, because different bulks materials might be varied a little different thickness)

Silver Mirrorwith Black Bracket

Two Screw Holes Distance: about 138mm; The Neck Pickup space width: about 46.5mm; The Bridge Pickup space width: about 45mm; The Space between two Pickups: about 57mm

Pickguards are made of plastic with protective films on surface; Bracket is made of Metal

This Pickguard set only fits Yamaha Pacifica guitars older 112 and 012 models,but not other types of guitars.If you have other types of guitars,please be sure to check the dimensions carefully to confirm whether the set can fit without any modification

Pickguard is made of plastic,it has plastic films which should be peeled off after installing

Thickness is about 2.2mm (+/- 0.2mm error, because different bulks materials might be varied a little different thickness)

The pickguard fits Mexican/American Standard Fender Strats, not other types of strats. (Please verify the pickguard dimensions when you order the item)

Vintage voiced' single coil pickups; Sweet and round vintage tone sound fantastic ; Ceramic magnet with 250K pots and 5 way switch

Classic Staggered Polepiece; Pickups have bright spanky articulate single coil sound; Pickups Resistance (approx.): Neck 5.75K; Middle 5.75K; Bridge 6.4K

Fits 40" 41" Size guitars, Easy Installation, Plastic standard shaped, With self-adhesive tape on the back and uncover it to stick on the guitar

100% brand new and high quality acoustic guitar pickguard, Perfect replacement pickguard for acoustic guitar

Thin protective film on the front surface of the pickguard, peel off after installation

This pickguard fit American/Mexican made vintage 65 / 60s and modern Jazzmaster pickguard replacement. If you have other types of Jazzmaster guitar, you may need a little modification for line up.

There are 13 mounting screw holes in the side of the pickguard, Notched design for easy truss rod access.

There are 2 layers thin protective film on the front surface of the pickguard, peel off after installation.