Best Fender Electric Guitar Pick Guards in 2026

Fit for most Fender guitar or bass, Phillips ovalhead screws to fit countersunk pickguards and cover plates

Screw Head Diameter: 1/8 inch( 3mm)

Screw Length: 1/2 inch(12mm)，the standard for Fender

The Package Length of the Product is 30.48 centimeters

The Package Width of the Product is 24.13 centimeters

The Package Height of the Product is 2.54 centimeters

Fits US/Mexico Made Fender Standard Telecaster Modern Style.If you use it for other Tele style guitar, you may need a modification for line up.

8 screw holes and 2 screw holes for neck pickup

Single ply Black plastic material,0.082 inch thickness

Genuine Fender Replacement Part

High Quality

Durable

11 screw holes in the side of pickguard, 3 single coil pickup holes were cut to fit American/Mexican Standard Fender Stratocaster.Back plate is as pictures shown.

Material: 4Ply constructions made of quality celluloid and PVC plastic material. Color: orange shell / white / black / white.

There are 2 layers thin protective film on the front surface of the pickguard, peel off after installation.

Shawbucker 1 Bridge and Gen 4 noiseless middle/neck pickups

Sb 1 - Alnico 2 magnets for sweet, musical sound

Low-output pickup with enamel-coated magnet wire for vintage-style tone

This Pickguard fits USA/Mexican Vintage 5 Hole Fender Telecasters,but not Fender Squier Teles or other types of Teles.If you have other types of Teles,you may need to make a little modification to let it fit

Important note: there are no mounting screw holes for the pickup; Pickguard is made of plastic acrylic, not Metal,it has plastic films which should be peeled off after installing

Thickness is about 2.6mm (+/- 0.2mm error, because different bulks materials might be varied a little different thickness)

Awesome pickguard screws,evenly finished and snugged up well in some dense wood,the heads coating does not come off easily

When a guitar for replacement pickups or wiring replace their rusty screws with these new screws can really brighten up a guitar

The mounting screws vary quite a bit, so you definitely do need to pick through them and find the right size for the job,They are exact specs of any screw you find for pickguards and back plate covers

11 screw holes in the side of pickguard, 2 pickup holes (humbucker - humbucker) were cut to fit American/Mexican Standard Fender Stratocaster. Back plate is as pictures shown.

Material: 3Ply constructions made of quality PVC plastic material. Color: white / black / white.

There are 2 layers thin protective film on the front surface of the pickguard, peel off after installation.

Material: Plastic, not Metal

The pickguard has plastic protective films on it

One humbucker and on pot hole for most Fender Delonge Strats

This pickguard fits American/Mexican Standard Fender Telecaster modern style guitar part, not Squier or any other Tele made in Asian country. If you have other types of Tele guitar, you may need a little modification for line up.

There are 8 screw holes in the side of pickguard and 2 screw holes for neck pickup. Due to the wide variety of pickguards in the market, please be sure to verify the dimensions carefully.

Material: 4Ply constructions made of celluloid and PVC plastic material. Color: aged pearloid / cream / black / cream.

11 screw holes in the side of pickguard, 2 pickup holes (humbucker - humbucker) were cut to fit American/Mexican Standard Fender Stratocaster.

Material: 4Ply constructions made of quality celluloid and PVC plastic material. Color: red tortoise shell / white / black / white.

There are 2 layers thin protective film on the front surface of the pickguard, peel off after installation.

11 screw holes in the side of pickguard, 3 pickup holes (single coil - single coil - humbucker) were cut to fit American/Mexican Standard Fender Stratocaster.

Material: 3Ply constructions made of quality PVC plastic material. Color: mint green / black / mint green.

There are 2 layers thin protective film on the front surface of the pickguard, peel off after installation.

8 screw holes in the side of pickguard, 3 single coil pickup holes were cut to fit American/Mexican Standard Fender Stratocaster. Back plate is as pictures shown.

Material: 4Ply constructions made of quality celluloid and PVC plastic material. Color: red tortoise shell / white / black / white.

There are 2 layers thin protective film on the front surface of the pickguard, peel off after installation.

11 screw holes in the side of pickguard, 3 pickup holes (humbucker - single coil - humbucker) were cut to fit American/Mexican Standard Fender Stratocaster. Back plate is as pictures shown.

Material: 3Ply constructions made of quality PVC plastic material. Color: mint green / black / mint green.

There are 2 layers thin protective film on the front surface of the pickguard, peel off after installation.

This Pickguard fits 11 hole standard Fender Jimi Hendrix Strats with a reversed bridge pickup route. If you have other types of Teles,you may need to make a little modification to let it fit

Pickguard is made of plastic, it has plastic films which should be peeled off after installation

Thickness is about 2.2mm (+/- 0.2mm error, because different bulks materials might be varied a little different thickness)

Compatible with American strat style guitars (can also work on 11 holes Mexico strats).

Made to current 11 holes, please refer to the size picture before buying this item.

3-Ply electric guitar pickguard, SSS single coil configuration.

This Pickguard fits USA/Mexican Standard Fender Telecasters,but not Fender Squier Teles or other types of Teles.If you have other types of Teles,you may need to make a little modification to let it fit

Important note: there are only 2 (not 3) mounting screw holes for the humbcuker pickup; Pickguard is made of plastic, it has plastic films which should be peeled off after installing

Thickness is about 2.2mm (+/- 0.2mm error, because different bulks materials might be varied a little different thickness)

The pickguard fits Mexican/American Standard Fender Strats, not other types of strats. (Please verify the pickguard dimensions when you order the item)

Vintage voiced' single coil pickups; Sweet and round vintage tone sound fantastic ; Ceramic magnet with 250K pots and 5 way switch

Classic Staggered Polepiece; Pickups have bright spanky articulate single coil sound; Pickups Resistance (approx.): Neck 5.75K; Middle 5.75K; Bridge 6.4K

11 screw holes in the side of pickguard, 3 pickup holes (single coil - single coil - humbucker) were cut to fit American/Mexican Standard Fender Stratocaster.Back plate is as pictures shown.

Material: 4Ply constructions made of quality celluloid and PVC plastic material. Color: brown tortoise shell / white / black / white.

There are 2 layers thin protective film on the front surface of the pickguard, peel off after installation.

This pickguard fit USA/Mexican Fender standard telecaster humbucker pickguard HH replacement, please check the dimension before you buying this tele pickguard humbucker.

There are 8 screw holes in the side of pickguard, humbucker hole size: 1.50 x 2.78 inch / 38 x 70.5mm.

Material: 3Ply constructions made of quality PVC plastic material. Color: black / white / black.

This pickguard fit USA/Mexican Fender standard telecaster mini humbucker pickguard replacement, please check the dimension before you buying this pickguard.

There are 8 screw holes in the side of pickguard, Mini humbucker pickup hole size 1.12 x 2.70 inch / 28.5 x 68.5mm

Material: 3Ply constructions made of quality PVC plastic material. Color: black / white / black.

This pickguard fit Fender 69 telecaster thinline re-issue guitar part, please check the dimension before buying this pickguard.

There are 12 hole standard mounting pattern with counter-sunk mounting screw holes.2 control pot holes pre-drilled in standard positions.

Material: 3Ply constructions made of quality PVC plastic material. Color: ivory white / black / ivory white.

This pickguard fit Fender 69 telecaster thinline re-issue guitar part, please check the dimension before buying this pickguard.

There are 12 hole standard mounting pattern with counter-sunk mounting screw holes.2 control pot holes pre-drilled in Standard positions.

Material: 3Ply constructions made of quality PVC plastic material. Color: mint green / black / mint green.

Authentic Fender Pickguard to preserve the integrity and authenticity of your instrument

Constructed of premium celluloid material.

Double check your screw-hole pattern and bridge type to ensure you chose the right model.

Fits Fender US/Mexico Made Standard Stratocaster Modern Style.If you use it for other Strat style guitar, you may need a modification for line up.

Pickguard: 11 mounting screw holes, SSS pickup rountine. 3ply Abalone Pearl/ white/Black PVC material,0.09 inch (2.2mm)thickness

Backplate: 6 Holes. 4ply Abalone Pearl/Black/white/Black PVC material,0.09 inch (2.3MM)thickness.

Dopro three mounting-screw or two mounting-screw round corner holes for humbucking bridge pickup; Fits most American Standard, Hot Rod, American Deluxe, Lonestar, Classic Series '70s Strat HSS models. Some modification may be needed for other models of Strats

Pickguard holes may vary due to different country of origin or manufactured date, please double verify your screw-hole pattern according to our dimension photo to ensure the pickguard will fit your guitar.

Made of plastic; Each pickguard has two layers of plastic films which should be peeled off after installing

🎵 【Updated SSH Configuration】pre-loaded single coil pups for neck and middle position, bridge position with humbucker pickup, all with alnico v magnets bar and fully wax potted, with upgraded clear bobbins, an exact replica of the original Alnico V stratocaster pickups

🎵 【Great Sound】the humbucker bridge pickup is clear and rich in tone, when you add gain or distortion, it's not muddy sounding but has that crunch you expect for blues, country, and rock. The single coils with high gain and distortion are great

🎵 【Supper Easy to Install】only take minutes to solder 3 wires: 2 red pre-tinned wires are for the ground on input jack and spring claw, the white wire for the output hot of jack, or solder other way as you like to have desired sound

This pickguard fit Fender left handed Telecaster guitar part. If you have other types of Tele guitar, you may need a little modification for line up.

There are 8 screw holes in the side of pickguard and 2 screw holes fit neck pickup.

Material: 4Ply constructions made of quality celluloid and PVC plastic material. Color: black pearloid / black / white / black.

Fit for most Fender guitar or bass, Phillips ovalhead screws to fit countersunk pickguards and cover plates

Screw Head Diameter: 1/8 inch( 3mm)

Screw Length: 1/2 inch(12mm)，the standard for Fender