Best Fleor Bass Guitar Pick Guards in 2026

Fit for most Fender guitar or bass, Phillips ovalhead screws to fit countersunk pickguards and cover plates

Screw Head Diameter: 1/8 inch( 3mm)

Screw Length: 1/2 inch(12mm)，the standard for Fender

Ideal for electric guitar bass pickguard DIY. Enough for two Strat, Tele, J Bass or one P Bass pickguard custom

Plastic made, 2.0-2.2mm thickness, easy to cut

Size: 435*290*2.2mm (17*12 inch)

The Pure Vintage range provides authentic Fender Pickguards made in the same exact fashion as they were 50-60 years ago.

Constructed of premium celluloid material.

Double check your screw-hole pattern to ensure you chose the right model.

For guitar and bass. Good for DIY your own style guitar or repair your guitar.

Color: Black BWB

Size: approx. 11.6 x 17 x 0.09 Inch ( 29.5 x 43 x 0.23 cm ).

Awesome pickguard screws,evenly finished and snugged up well in some dense wood,the heads coating does not come off easily

When a guitar for replacement pickups or wiring replace their rusty screws with these new screws can really brighten up a guitar

The mounting screws vary quite a bit, so you definitely do need to pick through them and find the right size for the job,They are exact specs of any screw you find for pickguards and back plate covers

Tex-mex pickups

Polysol-coated magnet wire

Staggered pole pieces for balanced output

black 2ply

2-point closure

Genuine Fender Replacement Part

High Quality

Durable

You can use these blank material sheets to customize any pickguards or covers by yourself.

Dimension is about 11"x17" (29x43cm); Sheet is made of plastic,it has plastic protective films which can be peeled off

Thickness is about 2.2mm (+/- 0.2mm error, because different bulks materials might be varied different thickness)

Fits 40" 41" Size guitars, Easy Installation, Plastic standard shaped, With self-adhesive tape on the back and uncover it to stick on the guitar

100% brand new and high quality acoustic guitar pickguard, Perfect replacement pickguard for acoustic guitar

Thin protective film on the front surface of the pickguard, peel off after installation

Style Design Clear Glossy Surface Pickguard

Scratch Resistant Coating, Anti Dust, Anti Fingerprint

High Quality Film and Made in South Korea.

KEEP IT FRESH: If you’re looking to try out a new style or you just like to change things up now and then, the Precision Bass Pickguards from D’Andrea is the perfect way to give your performance a makeover without giving up your favorite guitar. Available in 15 unique designs, you’ll never run out of new looks to try.

HIGH QUALITY CONSTRUCTION: Each pickguard features vibrant and colorful patters in either sparkle or pearl with a variety of color options. They are precision cut and hand polished with a 4-ply core for a sleek look and durable design. Each one is made with quality materials and delicate care

SIMPLE SWITCH: The Precision Bass Pickguards equipped with 13 screw holes to fit the exact specs of actual production models. The excellent fit ensures that you get a perfect and secure fit on your guitar every time, as well as the option to switch between styles as you see fit. Everything you want, all in one

This pickguard fit 4 stings standard Fender Jazz Bass made in USA or Mexico,not Squier Jazz Bass. If you have other types of Jazz Bass guitar, you may need a little modification for line up.

There is 10 screw holes in the side of pickguard, without truss rod notch. No holes for thumb rest or pickup cover.

Material: 4Ply constructions made of quality celluloid and PVC plastic material. Color: red tortoise shell / white / black / white.

This pickguard fit 4 stings standard Fender Jazz Bass made in USA or Mexico,not Squier Jazz Bass. If you have other types of Jazz Bass guitar, you may need a little modification for line up.

There is 10 screw holes in the side of pickguard, with truss rod notch.

There are 2 layers thin protective film on the front surface of the pickguard, peel off after installation.

Protect your guitar from scratched also a good decoration for your guitar; Before you use it, you should remove the surface film of guitar pick guard and then your pick guard will seems glamour

3 Shapes of guitar pickguard can meet your different preferences

Made of PVC material, good replaces for acoustic guitar pickguard

Fits most martin right handed models except OM18V, 3M glue self stick.

2mm thickness, consists of celluloid and high-quality crystal epoxy resin. beveled edge.

Flexible surface, compare with the traditional hardness surface pickguard, It very hard to be scratched. This means although used for a long time, it will still be in good condition.

Package includes: 8PCS Different Style Guitar Guard Plates

Material: PP

Capacity: Shown as picture 2

Guitar Pickguard Self-adhesive Anti-Scratch Water drop Shape Guard Plate Guard Sticker Guitar Pick for Replacement Acoustic Guitar.

With self-adhesive tape on the back and uncover it to stick on the guitar, easy to install.

Brand new and high quality acoustic guitar pickguard, Perfect replacement pickguard for acoustic guitar.

Material: PVC Plastic

Dimenison: about 25cm(length) * 20cm(width) * 0.7mm(thickness)

The sheet has plastic protective film at the top and Self-Adhesive on the back

This Pickguard fits USA/Mexican Fender Standard Jazz Bass,but not Fender Squier Jazz Bass or other types of Jazz Basses.If you have other types of J Bass,you may need to make a little modification to let it fit

Pickguard is made of plastic acrylic, not Metal,it has plastic films which should be peeled off after installing

Thickness is about 2.6mm (+/- 0.2mm error, because different bulks materials might be varied a little different thickness)

This Pickguard fits 13 Hole USA/Mexican Fender Standard P Bass,but not Fender Squier P Bass or other types of P Basses.If you have other types of P Bass,you may need to make a little modification to let it fit

Pickguard is made of plastic,it has plastic films which should be peeled off after installing

Thickness is about 2.2mm (+/- 0.2mm error, because different bulks materials might be varied a little different thickness)

Use this blank pickguard material sheet to cut your own acoustic pickguards.

Dimenison: about 7.87''(length) x 6.69''(width) x 0.03''(thickness)/20cm x 17cm x 0.07cm.

Material: PVC plastic. Color: Black. Thin plastic protective film at the top, peel off after installation.

This pickguard fit 4 stings Fender P Bass pickguard replacement, American and Mexico standard models, will not fit Squier or 5-string Precision Bass guitar. If you have other types of Precision Bass guitar, you may need a little modification for line up.

There is 13 screw holes in the side of pickguard,without truss rod notch. No holes for thumb rest or pickup cover.

There are 2 layers thin protective film on the front surface of the pickguard, peel off after installation. PURE aluminum foil shield on the backside, better shielding property and anti-interference.

Genuine Herco guitar accessory

Self adhering plastic pickguard

Color: Clear

This pickguard fit 4 stings Fender P Bass pickguard replacement, American and Mexico standard models, will not fit Squier or 5-string Precision Bass guitar. If you have other types of Precision Bass guitar, you may need a little modification for line up.

There is 13 screw holes in the side of pickguard, with truss rod notch.

Material: 4Ply constructions made of quality celluloid and PVC plastic material. Color: brown tortoise shell / white / black / white.

Basic Design Clear Matte Surface

Scratch Resistant Coating, Anti Dust, Anti Fingerprint

High Quality Film and Made in South Korea

Anti-scratch to protect the guitar, For Precision Bass guitar or similar

Material: PVC

Color: Black 1-Ply, 11 Screw

Use this blank pickguard material sheet to cut your own guitar pickguards, enough for 2 Tele or 2 Strat or 2 Jazz Bass, 1 P-Bass of your own design and choice.

Dimenison: about 11"(length) x 17"(width) x 0.09"(thickness)/290mm x 435mm x 2.3mm. Thickness is about +/- 0.2mm error, because different bulks materials might be varied different thickness.

Material: 4Ply constructions made of quality celluloid and PVC plastic material. Color: white pearloid / white / black / white.

Fender Accesories 099-2157-000 Jazz Bass Guitar Pickguard

Jazz Bass Pickguard

Country of Origin: United States

This Pickguard fits USA/Mexican Fender Standard Jazz Bass,but not USA Deluxe Jazz Bass, or Fender Squier Jazz Bass or other types of Jazz Basses.If you have other types of J Bass,you may need to make a little modification to let it fit

Pickguard is made of plastic,it has plastic films which should be peeled off after installing

Thickness is about 2.2mm (+/- 0.2mm error, because different bulks materials might be varied a little different thickness)