Best Bridge Electric Guitar Pick Guards in 2026

Fit for most Fender guitar or bass, Phillips ovalhead screws to fit countersunk pickguards and cover plates

Head Diameter: 1/8 inch( 3mm)

Screw Length: 1/2 inch(12mm)，the standard for Fender

Ideal for electric guitar bass pickguard DIY. Enough for two Strat, Tele, J Bass or one P Bass pickguard custom

Plastic made, 2.0-2.2mm thickness, easy to cut

Size: 435*290*2.2mm (17*12 inch)

Shawbucker 1 Bridge and Gen 4 noiseless middle/neck pickups

Sb 1 - Alnico 2 magnets for sweet, musical sound

Low-output pickup with enamel-coated magnet wire for vintage-style tone

Material: Plastic, not Metal

The pickguard has plastic protective films on it

One humbucker and on pot hole for most Fender Delonge Strats

This Pickguard fits 11 hole standard Fender Jimi Hendrix Strats with a reversed bridge pickup route. If you have other types of Teles,you may need to make a little modification to let it fit

Pickguard is made of plastic, it has plastic films which should be peeled off after installation

Thickness is about 2.2mm (+/- 0.2mm error, because different bulks materials might be varied a little different thickness)

Silver Mirrorwith Black Bracket

Two Screw Holes Distance: about 138mm; The Neck Pickup space width: about 46.5mm; The Bridge Pickup space width: about 45mm; The Space between two Pickups: about 57mm

Pickguards are made of plastic with protective films on surface; Bracket is made of Metal

The pickguard fits Mexican/American Standard Fender Strats, not other types of strats. (Please verify the pickguard dimensions when you order the item)

Vintage voiced' single coil pickups; Sweet and round vintage tone sound fantastic ; Ceramic magnet with 250K pots and 5 way switch

Classic Staggered Polepiece; Pickups have bright spanky articulate single coil sound; Pickups Resistance (approx.): Neck 5.75K; Middle 5.75K; Bridge 6.4K

8 screw holes in the side of pickguard, 3 single coil pickup holes were cut to fit American/Mexican Standard Fender Stratocaster.

Material: 4Ply constructions made of quality celluloid and PVC plastic material. Color: white pearloid / white / black / white.

There are 2 layers thin protective film on the front surface of the pickguard, peel off after installation.

Made of plastic, copper, and magnet, black white zebra color, looks great.If you don't like the sticker on the surface, you can tear it off, and underneath is a straight white pickguard, which is beautiful.

Prevents scratches, a good replacement for your guitar.be able to get any sounds want out of this pickguard (almost) without even touching the controls on the amp.it is a great plug and play setup to really open up theing of any midrange guitar.

1 single-coil pickup, 2 dual rail humbucker pickups, 5-ways switch, Two tone switch,Three knob potentiometer.

Universal Folk Acoustic Guitar Pickguard Self-adhesive Pick Guard Sticker for Acoustic Guitar Parts

With Self-adhesive tape on the back and uncover it to stick on the guitar, easy to install.

With thin protective film on the surface, protect your guitar surface from scratches of picks and nails.

This Pickguard fits USA/Mexican Standard Fender Telecasters,but not Fender Squier Teles or other types of Teles.If you have other types of Teles,you may need to make a little modification to let it fit

Important note: there are no mounting screw holes for the pickup hole; Made of plastic; The pickguard has plastic films which should be peeled off after installing

Thickness is about 2.2mm (+/- 0.2mm error, because different bulks materials might be varied a little different thickness)

Guitar Pickguard Self-adhesive Anti-Scratch Water drop Shape Guard Plate Guard Sticker Guitar Pick for Replacement Acoustic Guitar.

With self-adhesive tape on the back and uncover it to stick on the guitar, easy to install.

Brand new and high quality acoustic guitar pickguard, Perfect replacement pickguard for acoustic guitar.

Compatible with American/Mexico stratocaster style specifacations (can also work on 11 holes Mexico strats).

Made to current 11 holes, please refer to the size picture before buying this item.

3-Ply electric guitar pickguard, SSH coil configuration.

Authentic Fender Pickguard to preserve the integrity and authenticity of your instrument

Constructed of premium celluloid material.

Double check your screw-hole pattern and bridge type to ensure you chose the right model.

Package Content: You will receive 100 pcs guitar/bass pickguard screws in two colors, 50 in light black and 50 in bright silver, packed in 2 transparent boxes, easy to store. Sufficient quantity to meet your needs.

Suitable Size: The size of the guitar screw is about 12mm/0.5inch in total length, and the thread is measured about 3mm/0.1inch in diameter.

Premium Material: These pickguard screws are made of high-quality high quality iron, sturdy and durable, can be drilled into the guard plate easily. Besides, the plating surface can help prevent oxidation.

3-PLY WIRED PICKGUARD - loaded on a 11-hole off white pickguard for stratocaster style guitar, with SSH (single coil - single coil - humbucker) pickup configuration

PICKUPS - alnico v magnets,wax potted; DC resistance of neck pick-up is 7.8k, middle p'up is 8.7k, high output bridge p/u is 16k, single coil with stylish clear bobbins

ELECTRONICS - 5 way blade switch, large 250k potentiometer; 0.022uf and 0.0fuf capacitors

Fits Fender US/Mexico Made Standard Stratocaster Modern Style.If you use it for other Strat style guitar, you may need a modification for line up.

Pickguard: 11 mounting screw holes, SSS pickup rountine. 3ply Abalone Pearl/ white/Black PVC material,0.09 inch (2.2mm)thickness

Backplate: 6 Holes. 4ply Abalone Pearl/Black/white/Black PVC material,0.09 inch (2.3MM)thickness.

Dopro three mounting-screw or two mounting-screw round corner holes for humbucking bridge pickup; Fits most American Standard, Hot Rod, American Deluxe, Lonestar, Classic Series '70s Strat HSS models. Some modification may be needed for other models of Strats

Pickguard holes may vary due to different country of origin or manufactured date, please double verify your screw-hole pattern according to our dimension photo to ensure the pickguard will fit your guitar.

Made of plastic; Each pickguard has two layers of plastic films which should be peeled off after installing

Please note the pickguard only fits Mexican/American Standard Fender Strats, not Squier or any other types of strats (Pickguard screws are not included)

250K pots and 5 way switch

Staggered pole piece pickups are quality vintage warm and brightness sound with Alnico 5 magnets

Pickguard is made of PVC Plastic and top layer is printed pattern by 3D technology

This Pickguard fits 11 hole modern standard Fender Strats made in USA or Mexico,but not Fender Squier or other types of Strats. If you have other types of Strats,you may need to make a little modification to let it fit

Thickness is about 2.2mm (+/- 0.2mm error, because different bulks materials might be varied a little different thickness)

✔ | WIDE COMPATIBILITY | - The screws fit for most guitars or basses; Compatible with countersunk pickguards and cover plates.

✔ | PRODUCT DIMENSION | - Total length about 12mm; thread diameter about 3mm.

✔ | HIGH QUALITY MATERIAL | - The screws are made of high quality metal.

🎸【Rosewood Grain pick guard with rosewood finish】the pick guards made of ABS with rosewood finish to have an awsome rosewood finish, single coil pickup's covers and knobs made of copper, alnico magnets produces a vintage style pickups

🎸【Easy to Install with Minimal Soldering Required】all parts are ready to drop into your guitar body, like SSS pick ups, 5-position pickup selector switch and with push/pull switch on a tone pot, all were prewired and loaded; 11 holes were pre-drilled and guitar pick guards screws including, only need to take few minutes to solder ground and output wire

🎸【Ideal DIY guitar parts and replacement】pickguard and back plate protect the guitar from scratches and play an important role in guitar tremolo, is a good choice as guitar parts / accessories for luthiers to buold or repair guitar

1 volume and 2 tome control knobs

3ply Black SSH pickguard

Perfect pickguard part replacement for ST electric guitar.

【Application】LAMSAM Guitar pickguard and pickups set fit for Fender stratocaster or SQ, MTM, a good choice for replacements of pick guard, please pay attention to the specifications

【Easy to Install】complete pickup and controls were pre-wired and attached to a scratch guard, with good and clean pots; it's a great way to save money and speed the completion of your solidbody guitar, only need to take a few minutes to wire to your output jack and grounding to your guitar bridge

【Staggered Alnico V Pickups on 3-ply plastic pick guards】pickups have alnico V bar maganets under each coil, making the pups to sound clarity and bright,

PVC Flower Printing Colorful Guitar Pickguard Scratch Plate for 40 Inch 41 Inch Acoustic Guitars.

Ideal DIY guitar parts and replacement accessories for guitar lovers, learners or music bands.

Fit for 40 41 acoustic guitars. With green flower printing, also a good decor for your guitar.

SCOPE OF APPLICATION:fits USA/Mexican Standard Strat.

HIGH QUALITY MATERIAL：Made of 3ply PVC material.

PACKAGE INCLUDES: 3 single coil pickups with Ceramic magnet,2 tone & 1 volume knob, 5-way pickup switch & 1x Guitar Backplate & Included mounting screws.

Made of high-quality PVC material, it is durable and has a long service life, Suitable for acoustic guitar.

Self-adhesive tape on the back for fixing the guitar for ease of using, in addition, this guitar guard can be mounted on the guitar to protect your guitar surface from scratches.

Guitar pickguard has beautiful pattern and excellent workmanship can as a nice decoration for the guitar, easy to fit, thin and can be cut if necessary with scissors.

Color: Red&Black

material： PVC

Size:As shown in the figure

3-PLY WIRED PICKGUARD - loaded on a 11-hole white pickguard for stratocaster style electric guitars, with triple single-coil-sized humbucker pickup configuration

PREWIRED SUPER HIGH OUTPUT PICKUPS - fully waxed, the hot rails use blade with strong ceramic magnets, the DC resistance of neck pup - 16 KΩ, middle pickup - 18 KΩ, bridge pick up - 20 KΩ

PICKUP SOUND - modern tone, full, powerful sound and hum bucker, great for playing rock and funk, make your guitar more versatile

Preloaded Pickguard with 3 Single-coil Guitar Pickups Reverse-angle Bridge Pickup Routing