Best Metallor in 2026

The metal neck joint plate size approx. (L x W): 64mm x 51mm (2.5in x 2in).

Screw mounting hole center to center: 51mm x 38mm (2in x 1.5in), Screw size: Length: 44mm (1.7in), the top diameter: 9.2mm (0.36in).

100% brand new and tested, high quality and never used. Fits for most electric guitars.

Universal size suitable for most modern acoustic guitars.

High quality guitar end pegs for strong and consistent string fixing.

Designed to ensure clean string tone and resonance.

Strat knobs set 1 volume 2 tone high quality white guitar knobs.

Fits split shaft pots in metric size(Usually China,Korea and Japan made pots), not USA CTS pots.

Color: White with gold text;  Hollow shaft diameter: 6mm(0.24in); Size: As shown in the photo; Package includes: 1 x Volume Knob, 2 x Tone Knobs

Brand new Tune-O-Matic style stop bar tail piece in chrome color.

Compatible with Les Paul / SG style guitars and many 6-string electric guitars that use the traditional stop type tailpiece. 

This tail piece has an overall string span of 52.5mm(2.07inch) with the six string holes set deep into the rear edge of the tailpiece. It has a curved profile to match the curve of LP style guitars.

Universal size suitable for most modern acoustic guitars, 100% brand new and never used.

Shell with 4mm green abalone dot inside and brass circle outside on the head.

High quality moulded ABS plastic material. Black with green abalone dot. Length: Approx. 30mm(1.18in). Diameter of the head: Approx. 7.8mm(0.3in). Diameter of the end: Approx. 3.5mm(0.14in).

Mushrooms head, black color, metal material, look great and are tough enough.

14mm(0.55inch) in Diameter, Mounting screws included for your convenience.

Smooth, rounded design won't scratch or damage your strap with sharp edges.

Universal size suitable for most modern acoustic guitars.

High quality guitar end pegs for strong and consistent string fixing.

Designed to ensure clean string tone and resonance.

Fit for Squire and Strat/Tele style electric guitar or bass building

The Log A pots are usually used as volume controls

Split shaft 6mm will for most common Knob styles, comes complete with fixing nut and plain washer

Standard recessed rectangle plate which is used mostly on Stratocaster Telecaster style guitar or similar guitars.

Rectangle ship, metal material. A superior quality replacement jack socket for guitars.

Length 36.4mm, Width 28.4mm, Screw hole distance 27.4mm & 19.4mm , Jack hole diameter: 9.2mm, for specific dimensions, please look at the size diagram.

Compatible with Gibson Epiphone style electric guitars.

Fits metric 6mm ((about 0.24 inch) diameter pots.

Height: 11.8mm(0.46inch); Top diameter: 23.7mm(0.93inch); Base diameter: 26mm(1.02inch); Spline shaft: 6mm(0.24inch).

Compatible with Gibson Epiphone style electric guitars.

Fits metric 6mm ((about 0.24 inch) diameter pots.

Height: 11.8mm(0.46in); Top diameter: 23.7mm(0.93in); Base diameter: 26mm(1.02in); Spline shaft: 6mm(0.24in).

4 string vintage style bass bridge for Jazz bass and Precision bass top load upgrade.

Four adjustable barrel saddles. Strings mount at the rear of the bridge.

String spread is 57mm, Base plate is 80 x 44mm. String space is 19mm.

4 string vintage style bass bridge for Jazz bass and Precision bass top load upgrade.

4 adjustable barrel saddles. Strings mount at the rear of the bridge.

String spread is 57mm(2.24inch), Base plate is 80mm x 44mm(3.15inch x 1.73inch). String space is 19mm(0.75inch).

These strap buttons are suitable for most guitars, can be used on acoustic, electric, bass guitars, DIY kits and mandolins.

Solid metal material with professional treatment ensures sturdy and wear-resistant use.

Top Diameter: 15mm(0.59inch); Bottom Diameter: 9mm(0.35inch); Height: 9mm(0.35inch); Screw Length: 24mm(0.94inch)

Real slotted cattle bone nut replacement, flat bottom, Bone is a wonderful nut material-tough, beautifully and acoustically excellent, adds a rich, mellow tone to your playing, far superior to the dull thud of a plastic nut.

Size: 43 x 9 x 6mm(1.69 x 0.35 x 0.24in). String spacing E to E is 35mm( 7mm individual string spacing)

Compatible with Gibson, LP, ES, SG style electric guitar or similar guitar and acoustic guitar. High quality genuine bone nut perfect for your guitar upgrade or project

Chrome plated surface with White plastic buttons, ideal for acoustic guitar.

Post spacing: 35mm(1.38inch); Shaft diameter: 6mm; shaft length: 28.5mm, the overall length is 110mm

Gear ratio: 1:14, Metal material, heavy duty internal gear.

Brand new and high quality humbucker pickups with mounting screws and black plastic mounting rings.

Wide applicability, compatible with electric guitars which can be installed humbucker pickup of the guitar.

Neck pick up is a warm and sweet 15.05 k-ohms with an inductance of 6.8 Henries. string spacing is 50mm. Distance between the pole pieces is 10mm.

Compatible with American strat style guitars (can also work on 11 holes Mexico strats).

Made to current 11 holes, please refer to the size picture before buying this item.

3-Ply electric guitar pickguard, SSS single coil configuration.

Real slotted cattle bone nut replacement, flat bottom, Bone is a wonderful nut material-tough, beautifully and acoustically excellent, adds a rich, mellow tone to your playing, far superior to the dull thud of a plastic nut.

Size: 42mm x 5mm x 3mm(1.65inch x 0.2inch x 0.12inch). String spacing E to E is 36mm(12mm individual string spacing)

Compatible with precision bass guitar or similar bass. High quality genuine bone nut perfect for your bass upgrade or project.

Fits 40" 41" Size guitars, Easy Installation, Plastic standard shaped, With self-adhesive tape on the back and uncover it to stick on the guitar

100% brand new and high quality acoustic guitar pickguard, Perfect replacement pickguard for acoustic guitar

Thin protective film on the front surface of the pickguard, peel off after installation

Fits 40" 41" Size guitars, Easy Installation, Plastic standard shaped, With self-adhesive tape on the back and uncover it to stick on the guitar

100% brand new and high quality acoustic guitar pickguard, Perfect replacement pickguard for acoustic guitar

Thin protective film on the front surface of the pickguard, peel off after installation

Chrome plated surface with creamy-white plastic buttons, ideal for acoustic guitar.

Post spacing: 1.38inch (35mm); Shaft diameter: 6mm; shaft length: 27mm, the overall length is 110mm.

Gear ratio: 1:14, Steel body and plastic button, heavy duty internal gear & standard size.

Easy to use and multifunctional string winder, bridge pin puller, drill bit hexagonal adapter.

Loosen and tighten strings by unwinding and winding at the tuning pegs.

Pull out the bridge pins with the notch in the handle.

Chrome plated surface with White plastic buttons, ideal for your classical guitars.

Post spacing: 35mm(1.38inch); the overall length is 115.7mm(4.56in).

Gear ratio: 1:14, Metal material, heavy duty internal gear & standard size.

Fits for Les Paul style guitar and most similar guitars.

Almost all press-on knobs that fit coarse-knurled 18-spline pot shafts, won't fit fine-knurled 24-spline shafts.

Fits metric 6mm diameter pots, Height:12.7mm(0.55in); Top diameter:18mm(0.71in); Base diameter:26mm (1.02in); Spline shaft: 6mm(0.24in).

Set of 6 quality sealed black machine heads(3L+3R), fit 10mm(0.39inch) standard machine head hole.

Heavy duty internal gear tested, easy to install, compatible with steel string electric guitar or acoustic guitar.

Gear ratio: 1:14; Zinc alloy material with black plating；Location: 3L 3R; Head size is 22mm width. For specific dimensions, please look at the size diagram.

Fits 40" 41" Size guitars, Easy Installation, Plastic standard shaped, With self-adhesive tape on the back and uncover it to stick on the guitar

100% brand new and high quality acoustic guitar pickguard, Perfect replacement pickguard for acoustic guitar

Thin protective film on the front surface of the pickguard, peel off after installation

Ideal for general LP style double coil pickup replacement. Neck pickup pole spacing: 50mm; Bridge pickup pole spacing: 52mm.

Resistance: Neck 7.93k-ohms; Bridge 8.48k-ohms; Inductance: Neck 3.81H; Bridge 3.98H.

PVC coated magent wire, Ferrite & Alnico-V magnet, two conductor. Gold cover with black frame.

Ideal for general or LP style double coil pickup replacement. Neck pickup pole spacing: 50mm; Bridge pickup pole spacing: 52mm.

Resistance: Neck 7.93k-ohms; Bridge 8.48k-ohms; Inductance: Neck 3.81H; Bridge 3.98H

PVC coated magent wire, ceramic magnet, two conductor. Color: chrome cover with black frame.

100% brand new, pre-slotted string guides on top, flat bottom.

High quality string nut, real cattle bone, compatible with most vintage strat style guitars.

Please note the size: 42*6*3mm( 1.65in* 0.24in* 0.12in), with a 7.25" radius. String spacing E to E is 35mm(7mm individual string spacing).