Best Graph Tech Classical Guitar Nuts in 2026

What it fits : The PQL-5010-00 fits many Fender style electric guitars with a 1/8 inch slots. It is pre-slotted for a quick and simple install.

Improve Tuning: TUSQ XL is engineered from the same material as TUSQ and impregnated with PTFE which is five times more slippery than graphite. It has all the tonal benefits of TUSQ, bringing out the hidden harmonics of your guitar all while drastically improving tuning performance.

No Dead Spots: TUSQ XL is consistent from piece to piece, and within each piece, to offer you harmonically rich tones without the problems associated with natural materials.

High-quality real bone string nut for vintage style electric guitars

Nut is pre-slotted and has a 7.25" radius

1.650" (42 mm) wide

TUSQ XL is engineered from the same material as TUSQ and is impregnated with PTFE which is five times more slippery than graphite

It has all the tonal benefits of TUSQ, bringing out the hidden harmonics of your guitar all while drastically improving tuning performance

TUSQ XL is consistent from piece to piece, and within each piece, to offer you harmonically rich tones without the problems associated with natural materials

Converts any guitar for lap steel playing

Fits over the existing nut to raise action

Will not throw your guitar out of tune

Used for a Right-Handed 6-string acoustic guitar. Bone saddle size: 72 x 3 x 9mm; Bone nut size: 43 x 6 x 8.5mm.

Real Cattle Bone: Made of real cattle bone to ensure its density and stability, and compared with plastic material, it has better sound quality, less noise, longer service life and better conductivity.

Convenient to Use: These genuine bone guitar bridge saddle and nut have pre-cut string slots which require very little experience to install and are very simple and easy to use.

Materials:true high quality buffalo bone

Apply to Acoustic Electric Classical Guitar Bass guitar,Mandolin Banjo Ukulele

Saddle:Length×thickness×height:Approx 72mmX3mmx9mm

Made of 100% real high-quality bones, enhance timbre, Unbleached, keep the same color as pre-cut bone, offer a better tone.

Nut size:43mmx6mmx9mm, Perfectly replace your existing Bridge Saddle and Nut.

Nut and saddle have an important influence on the feel and timbre of guitar.

Pre-slotted for 6 strings Les paul & acoustic guitar

Material: Bone,That makes them harder than the more common plastic ones. This nut will 100% improve sound quality and sustain!

Size: 43mm x 6mm x 9mm

【STANDARD SIZE】 The bone nuts are pre-slotted and fit most of guitars. Bone nut size: 1.69 X 0.35 X 0.28 inch; Bone saddle size: 2.83 X 0.35 X 0.12 inch

【BEST CHOICE】 Made of high density real cattle bone, guitar nuts and bridge saddles can transmit vibration well. You can according to your own preferences, get the most suitable playing feeling

【IMPROVE SOUND】 The nuts and bridge saddles is made of real bone that have minimal porosity and a great appearance. Its density and minimal porosity are features that yield good intonation and clarity

High Quality Material: Our pre-slotted electric guitar nut made from high dense, unbleached real cattle bone, it can provides better tone than plastic/synthetic materials,longer service life.

Great Guitar Replacement Nut: These electric guitar bone nut have density and minimal porosity are features that yield good intonation and clarity.its can increase mid and high end harmonics, increase bass repsonse, improve tone, optimal vibration transfer.

Easy to Install: This guitar nut is pre-slotted to make for a quick and easy install. You could do it along even you are very little experience. Ideal for replacement and upgrade the nut on your 6 string electric guitar.

Measurement: Length: Approx. 43mm (1.69”); Height: 3.5 – 4.6 mm (0.14” – 0.18”); E to E String Spacing: Approx. 34.7mm (1.37”). See the attached pic reference drawing for specific dimensions.

Material: titanium alloy, durable and compact.

Help keep your guitar in tune better and reduce the friction of the strings in the nut.

100% Brand New,Flat Bottom

High quality(better than bone meal) sound and volume,Designed for modern and vintage electric guitars and found

Size:42 X 3.5 mm(1.653 X 0.137 X 0.177/0.137 inch)

100% as picture show,the quality is better than bone meal

Material:Cattle bone,GreentenMic Brand

size: 43 X 6 X 8.5mm(1.692 X 0.236 X 0.334 inch)

Real slotted cattle bone nut replacement, flat bottom, Bone is a wonderful nut material-tough, beautifully and acoustically excellent, adds a rich, mellow tone to your playing, far superior to the dull thud of a plastic nut.

Size: 43 x 9 x 6mm(1.69 x 0.35 x 0.24in). String spacing E to E is 35mm( 7mm individual string spacing)

Compatible with Gibson, LP, ES, SG style electric guitar or similar guitar and acoustic guitar. High quality genuine bone nut perfect for your guitar upgrade or project

Dimension: 43x3.5x4.5/5.16/5 (mm)

Real bone nut for electric guitars

Please note you may need to sand or deepen the slots, and polish the nut when you install it

Suitable for 6 string folk acoustic guitar.

Perfect decoration your instrument.

Excellent workmanship.

This is a blank bone, you can design the nut and saddle by yourself. Bone blank nut and saddle for guitar maker

Our guitar bone nut and saddle blank made of high dense, unbleached real bone material, which offer you a better tone than plastic

This real bone guitar saddle nut has minimal porosity and a great appearance. Its density and minimal porosity are features that yield good intonation and clarity

High Quality Material- These guitar bone nuts and saddles are made from high dense real cattle bone, hard texture,sound crisp,long service life.

Improve Guitar Sound Quality- These acoustic guitar bridge pins are hand-made from the finest quality cocobolo wood with abalone dot on the head.Which can effectively extend the guitar sustain, improve the volume attenuation, increase the guitar sounds quality

Lightweight and Easy to Install- It is pre-slotted to make for a quick and easy install.Please measure the dimension of your guitar saddle and nut carefully before your order it. Please note you may need to sand or deepen the slots, and polish the saddle and nut when you install it

The Pre-slotted Guitar Bone Nut is easy to install and convenient to use, applicable to vintage 12 string acoustic guitars, homemade DIY guitar.

They are genuine bone, evenly dense and colored, much harder, they sound great, so that can improve the overall level of the guitar, great replacement parts for acoustic guitar enthusiasts, and will give better tone than the cheaper plastic parts, produce clearer, richer and more stable sound.

The nut was well cut, dimension: approx. 49*6*9.2mm, may you need to do some sanding and filing by depending on your guitar. The string slot spacing are perfect on the nut, strong enough to handle string pressure yet soft enough to file and sand easily.

ENSURE BETTER TONE: The Classic Guitar Parts can improve the overall level of the guitar, play a role in improving the acoustic quality of the guitar, great replacement parts of acoustic guitar.

GREAT GUITAR ITEM: Great accessory for guitar enthusiasts, much harder and will give better tone than the cheaper plastic parts, Mandolin Banjo and Ukulele which can produce clearer, richer and more stable sound.

DURABLE & PORTABLE: This The Bone Guitar Nut Blanks are made of high quality cow bone, offering a better tone than plastic with excellent stability and durability, and lightweight and durable, and can help anchor string and adjust it to withstand tension for better performance and compensate for the high pitch and improve the sound quality.

Nice cow bone blanks for cigar box guitar nuts

Great for 3 or 4-string cigar box guitars

1.54" long x .350" high x .195" wide (35mm x 9mm x 5mm)

Made from PRS designed proprietary materials that captures many of the tonal qualities of bone

This self-lubricating nut is compatible with tremolo and stop-tail models

Only available in black color. Set of 2.

Brand New and Hight Quality

Untrimmed, uncut and unslotted

Made of natural bone, it can provides better tone than cheaper plastic parts

Made of 100% real high quality buffalo bone

You can design the nut by yourself

Package includes: 6 x Blank Bone Guitar Nut. Nut size: 52*10*6mm

【Miwayer 6 String Electric Guitar Bone Nut Curved Bottom】Made of high-quality beef bone, it produces a more beautiful sound than other materials, and you are the best choice for improving the sound quality of your electric guitar.

【Size】Electric Guitar Nut Size:43 x 3.2 x 4.6/5/5.65mm / 1.693 x 0.126x 0.181/0.197/0.222inch.

【Suitable】 Great electric guitar replacement parts, Great accessory for electric guitar enthusiasts, ideal replacement for your 6 strings electric guitar

This product is made of cattle bone and rosewood, lightweight and durable. Compensate for the high pitch and improve the sound quality.

Can help anchor string and adjust it to withstand tension for better performance.

Ideal replacement for classic guitar. Produce clearer, richer and more stable sound. A replacement bone bridge saddle nut for fitting to classic guitar.

【Miwayer classical guitar bridge】Made of high-quality beef bone, it produces a more beautiful sound than other materials, and you are the best choice for improving the sound quality of your guitar.

【Size】Nut Size:52 x 9 x 6mm / 2.05 x 0.35 x 0.24inch.Saddle Size:80 x 3 x 9/8.5/8 mm / 3.15 x 0.12 x 0.315/0.335/0.354 inches

【Suitable】 Great Guitar Replacement Parts，Great accessory for guitar enthusiasts, ideal replacement for your 6 strings Classical guitar

TUSQ

Classical Guitar

NUTS

Plastic Classical Guitar Nuts

The PQL-6010-AG is the perfect option to replace and upgrade the nut on your electric guitar (compatible with Gibson from 2014 or earlier). Or other similar guitars. Aged TUSQ XL slotted nut to achieve the vintage look of an older nut.

The 6011 model nut (post 2014) is slightly taller. When in doubt, chose the 6011, you can always sand the bottom of the nut to adjust lower.

For Electric guitar and 6 string configuration.