Best Bridge Bass Guitar Pickup Covers in 2026

Genuine Fender pickup tubing is ideal for mounting new pickups just right and for replacing pickup springs or older tubing

Package includes 12 pieces of rubber tubing

Used with most Fender instruments with pickguard-mounting pickups

Always has a lack of screws for guitar repairing/installing? Now it's not a problem anymore!

The whole kit includes 9 types of screws for electric guitar, total 149 pieces. Please notice: The pickup height adjustment screws for humbucker will NOT fit pickups with imperail thread (such as Seymour Dunca, EMG, Dimarzio), also the neck plate screws may NOT fit neck joints without neck plate.

❥Pickguard Screws: 50 pcs ❥Tuner Screws: 25 pcs ❥Strat Bridge Mounting Screws: 12 pcs ❥Tele Bridge Mounting Screws: 12 pcs

Hum Canceling: Yes^D.C. Resistance: 12.5k^Magnet: .25mm diameter Alnico 5^Resonant Peak: 10.2k^Warranty : 1 Year (if not altered)

Genuine Fender Part #001-0108-000

Precision Bass Chrome Bridge Cover

Bass Guitar Pickup Set

Neck Bridge

Dimensions: Outside(L x W): Approx. 92.5 x 46.3mm(3.64 x 1.82 in); Mounting Screws Distance (L x W): Approx. 81.4 x 37.2mm(3.2 x 1.46 in); Neck Ring Height: Approx. 5.88mm (0.23 in); Bridge Ring Height: Approx.7.88mm(0.35 in). Please check the parameter drawing in the attached pics before placing your order.

Humbucking pickup ring set - neck and bridge, flat bottom.

Metal construction, durable and sturdy, not easy to deform. Nice accessory to replace the broken or old pickup rings to dress up your guitar.

Genuine Fender Replacement Part

High Quality

Durable

Bass pickup Fit Fender 4 string Jazz bass guitar part.

Open style pickup, magnet: Alnico 5.

Pole Pieces: Solid Flat Pole Pieces

Dimensions: Outside(L x W): Approx. 92.4 x 46.3mm(3.64 x 1.82 in); Mounting Screws Distance (L x W): Approx. 81.4 x 37.2mm(3.2 x 1.46 in); Neck Ring Height: Approx. 8mm - 8.9mm(0.31 - 0.34 in); Bridge Ring Height: Approx.10.3mm - 10.6mm(0.41 - 0.42 in). Please check the parameter drawing in the attached pics before placing your order.

Professional quality - metal curved bottom humbucker pickup rings (2) in Black finish. Metal construction, durable and sturdy, not easy to deform.

Complete set - Includes both Neck and Bridge position humbucking pickup mounting rings with curved bottom. Nice accessory to replace the broken or old pickup rings to dress up your guitar.

These Pickup Rings in black color are wonderful DIY parts for guitarists or luthiers.Compatible with electric guitar or other similar guitar parts,which are used to replace your old pickup rings.

It's so easy for you to install these two mounting rings with screws.(included 8PCS).

Metal construction, stable and sturdy and you needn't worry about deforming.

Portable piezo pickup with wooden encased element

Delivers natural sound without modification to the instrument

Neatly-finished shim discs included

Noiseless Good Balance,4 Conduct with shield,About 102mm in length, 49mm in width, and 20mm in height

The black and ground that are together are the ground. The two hooked together tape up don’t use. The single other wire is your hot . That’s 2 wire hook up. You could hook a switch from the 2 not used and to the hot and your pick ups would be single coil or humbucking. There are many wiring options by using these 2 to put pickups in and out of phase

The conductor wires are red for hot, black for neutral with a white and green soldered together joining the coils

Different guitars may use different pole spacing pickups, if you want to get correct covers for your pickups, you must know the pole spacing of your current pickups.The pole spacing is very important for changing pickup covers,to avoid unfit problem, please be sure to verify the pole spacing of your pickups before ordering

Brass Material Humbucker Pickup Covers; Neck is 49.2mm(1-15/16") pole spacing measured from center to center and Bridge is 52mm pole spacing measured center to center

Overall dimensions approx. 2.75" x 1.5" x .635" (69.8mm x 38.1mm x 16mm)

Fits most Epiphone Les Pauls or other humbucker guitars, not Gibson Les Pauls

Space for humbucker pickup:70x39.3mm; Distance between two pickup height screws: 78mm; Frame height: 3x5mm and 7x9mm

Dimenison is the most important factor to prove whether these rings can fit your humbucker pickups perfectly, so please verify the dimenisons photo in the listing first

Fits most JB style electric bass, like Fender/Squier Jazz Bass or similar bass. Bridge position

Genuine Wilkinson parts. 58mm pole spacing , wax potted

Classic tone with our new Var-Gauss technology: Bass frequencies keep their deep growl while the treble sounds are smoother but still defined

Fishman’s classic bridge-mounted, dual-element, piezo-ceramic pickup

An impedance-matching preamp is recommended, but not required

The BP-100 installs in minutes and delivers deep sustained pizz tone, and fast articulation with emphasized direct string sound

The Pickup output a strong sound, like to play metal guitarist, is a good choice.

Hot Rail 2-Dual Blade Electric Guitar High Output Track Type Four Coil Humbucker Pickup Black

Comes with connecting wires, with strong magnification

Combines the power of our active 81 with the soul of a passive PAF

Produces a well-balanced tone, with tight bass response, glassy mids, and crunchy highs

Utilizes over-wound coils loaded with ceramic bar magnets that are fully shielded to reduce noise

Electric guitar humbucker pickup ring cover frame is compatible with LP/SG electric guitar or other similar guitar parts.Come with screws.

Electric guitar humbucker pickup ring cover frame is made of high quality metal material,solid and durable to use, also has a long service time,anti-rust.

Outside Size: 92mm x 46mm/3.62 x 1.81in;Inside Size: 70mm x 39mm/2.75 x 1.53in; Color: Silver,Black, Gold(Optional).

4-Band Equalizer, push bass/middle/treble to adjust frequency.

Designed for acoustic guitar, it helps to modify and perfect sound.

Pre-wired for easy assembly, includes connecting wire with 2.5mm Plug.

This template will help you to create a cavity for standard J bass bridge pickup, Accurate correct size and thickness, cutted by CNC machine, so you will not need to puzzle over cavity dimensions

Our crystal clear routing templates allow you to see the guitar body underneath, it will make your accurate template placement be easy

Outer dimension: 150mm x 100mm(5-7/8 x 3-7/8 inch), thickness 10mm(3/8 inch) , easy to get contact with the router bearing. Compatible with most standard routers and bits.

Humbucking pickup ring set - neck and bridge, flat bottom.

Metal construction, durable and sturdy, not easy to deform. Nice accessory to replace the broken or old pickup rings to dress up your guitar.

Mounting screws are not included. Special distinctive shape, very attractive.

The P Bass Humbucker Pickups fit for 4 String PB Bass Guitar, 93 Korean Squier, Fernandez dimension 4x, compatible for Squier Affinity PJ JB style electric bass and punchy JB sound.

Covers are made of ABS material, ceramic magnet, durable to use, sealed humbucker are triple wax dipped and vacuum sealed to eliminate any unwanted feedback and noise.

Classic Tone with New Var-Gauss Technology: Bass frequencies keep their deep growl while the treble sounds are smoother but still defined, the prewired harness with 250K pots, to be smooth out the highs.

PRODUCT STRUCTURE -A professional Piezo Contact Microphone Pickup: 1/4" jack with 12" cable.Jack female socket, suitable for universal cables with 6.35mm jack male plug.

SCOPE OF APPLICATION -The soundboard classical guitar pickup kit can also be used w/ other instruments such as bass, cello, ukulele, banjo, violin, mandolin,and more. Features integrated technology for high definition acoustic transduction

SOUND EFFECT-Contact microphones pick up sound by being in direct contact with the sound source.Able to eliminate external sounds interference and not be influenced by sound reflections from nearby objects.

Genuine Fender replacement Precision Bass pickup covers

Set of two black plastic Precision Bass pickup covers

Introduced on 1957 Precision Bass guitars

Please check the size before your purchasing.

For 4 String Bass

one PB Bridge,one PB Neck Place and pickup bridge

Bass Pickup Set with P- J-style Single-coil Pickups

Vintage-style pickup cover for Fender bridge assemblies

Fits 51 Precision Bass reissue (Japan)

Does not include mounting hardware

4-String Passive Dual-coil (Humbucking) J-Bass Bridge/Middle Replacement Pickup Set

The Original Jazz Bass pickups deliver the low-end growl and up-front midrange punch that makes the Jazz Bass as popular today as it was when it was introduced over forty years ago

These pickups are make with flush-mounted Alnico 5 magnets, enamel-coated magnet wire, and a copper shield

Bridge: DC Resistance: 7.5K, Inductance: 3.35 Hernias