Best Kaish in 2025

Wear resistance, durable; High quality replacement handle

Handle length: 218mm; Handle width: 30mm; Mounting screw hole distance: 196mm x 46mm

Small size, easy to carry and storage, easy to use, good performance

Color: Black with New Zealand Abalone Top (Abalone top is a natural material so knob to knob do have variations)

Fits any guitars or basses which have 6mm or less than 6mm diameter Solid or Split shaft pots; But they DO NOT fit some larger USA 1/4"(6.35mm) diameter pots; Please be sure to check the diameter of your pots before ordering.

Material: Metal

Wear resistance, durable; High quality replacement handle

Handle length: 218mm; Handle width: 30mm; Mounting screw hole distance: 196mm x 46mm

Small size, easy to carry and storage, easy to use, good performance

Wear resistance, durable; High quality replacement handle

Handle length: 218mm; Handle width: 30mm; Mounting screw hole distance: 196mm x 46mm

Small size, easy to carry and storage, easy to use, good performance

Handle Length: 218mm; Handle Width: 30mm

Metric M5 Screws Dimensions: Length 25mm; Head Diameter 6.93mm; Thread diameter 3.92mm; M5 Nut Dimension: Outer diameter 5.5mm; Height 8.05mm

Handle Screws & Nuts fit our Amplifier handles perfectly, suitable for replacing the old and broken Amplifier handles, easy to install

Wear resistance, durable; High quality replacement handle

Handle length: 218mm; Handle width: 30mm; Mounting screw hole distance: 196mm x 46mm

Small size, easy to carry and storage, easy to use, good performance

Material: knobs is made of ABS (plastic); cap is made of Aluminum

Total Height: about 15.6mm; Outer diameter at the top: about 15.8mm; Outer diameter at the base: about 19.8mm

Fits Marshall Amplifiers with 5.8mm to 6mm Shaft Pots, these knobs DO not fit 'D' shaft Pots

This Pickguard fits USA/Mexican Vintage 5 Hole Fender Telecasters,but not Fender Squier Teles or other types of Teles.If you have other types of Teles,you may need to make a little modification to let it fit

Important note: there are no mounting screw holes for the pickup; Pickguard is made of plastic acrylic, not Metal,it has plastic films which should be peeled off after installing

Thickness is about 2.6mm (+/- 0.2mm error, because different bulks materials might be varied a little different thickness)

This Pickguard fits USA/Mexican Vintage 5 Hole Fender Telecasters,but not Fender Squier Teles or other types of Teles.If you have other types of Teles,you may need to make a little modification to let it fit

Important note: there are no mounting screw holes for the pickup; Pickguard is made of plastic acrylic, not Metal,it has plastic films which should be peeled off after installing

Thickness is about 2.6mm (+/- 0.2mm error, because different bulks materials might be varied a little different thickness)

Inner hole diameter: 6.1mm; Outside Diameter: 10.15mm; Total Height: 7.6mm; Top Diameter: 14mm

Please be sure to verify the diameter of your tuner's post, these bushings only fit tuners with posts less than 6.1mm, they may not fit original Kluson split shaft tuners which have larger diameter posts

Well made high quality guitar tuner bushings; Material is metal, not plastic

Inner hole diameter: 6.1mm; Outside Diameter: 10.15mm; Total Height: 7.6mm; Top Diameter: 14mm

Please be sure to verify the diameter of your tuner's post, these bushings only fit tuners with posts less than 6.1mm, they may not fit original Kluson split shaft tuners which have larger diameter posts

Well made high quality guitar tuner bushings; Material is metal, not plastic

These nuts DO NOT fits metric pots or other sizes USA pots, please verify the thread type and diameter of your pots before ordering

3/8" threads will only fit most CTS pots and Switchcraft jacks (does not fit Switchcraft 3-way toggle switches)

Nuts uses 1/2" wrench; Flat washer is 5/8" outside diameter and 3/8" inside.

This Pickguard fits USA/Mexican Vintage 5 Hole Fender Telecasters,but not Fender Squier Teles or other types of Teles.If you have other types of Teles,you may need to make a little modification to let it fit

Important note: there are no mounting screw holes for the pickup; Pickguard is made of plastic, it has plastic films which should be peeled off after installing

Thickness is about 2.2mm (+/- 0.2mm error, because different bulks materials might be varied a little different thickness)

Material: ABS; Very good quality guitar bass 9V battery case

Surface Size: 78mm (Length) x 41mm (Width) x 22mm (Height)

Mounting Case Size: 56mm (Length) x 30mm (Width)

Please note these are pickup frame mounting screws, but not pickup height screws

The thread diameter is about 2.5mm and total length is about 18mm

Quality mounting screws for most humbucker pickups rings

Material: Plastic with Set Screw; Total height: 15mm; Base diameter: 19mm; Fits 1/4" (6.4mm) diameter pots

For Effect Pedals or Amplifiers

Quality Knobs with Set Screw

Material: Plastic, not Metal

The pickguard has plastic protective films on it

One humbucker and on pot hole for most Fender Delonge Strats

Pickup Height screws are Imperial/USA thread which can fit most (not all) Gibson/EMG/Seymour Duncan or Dimarzio Pickups

4 Pickup Height Screws Dimension: 28.4mm(total length including head) x 2.9mm(thread diameter); 8 Pickup Frame Screws Dimension: 17.6mm(total length including head) x 2.5mm(thread diameter); Pickup Springs Dimenison: 26mm(Length) x 4.7mm(Outer diameter) x 3.3mm(Inner diameter)

Due to the wide variety of pickups and screws in the market,please be sure to verify the dimensions carefully before you order the item; We can not promise these screws would fit all the Epiphone Les Paul Pickups or Humbucker Pickups made in China

Abalone top - this is a natural material so knob to knob might have variations

Bottom pots hole diameter: about 6.1mm Outside diameter: about 18.5mm; Total height: about 18.5mm

Fits any guitars or basses which have 6mm or less than 6mm diameter Solid or Split shaft pots; But they DO NOT fit some larger USA 1/4"(6.35mm) diameter pots; Please be sure to verify the shaft diameter of your pots before ordering, to avoid any unfit problems.

Abalone top - this is a natural material so knob to knob might have variations

Bottom inner hole diameter for pots: about 6.1mm (Important: please be sure to measure the diameter shaft of your pots before ordering) Outside diameter: about 18.5mm; Total height: about 18.5mm

Fits any guitars or basses which have 6mm or less than 6mm diameter Solid or Split shaft pots; But they DO NOT fit some larger USA 1/4"(6.35mm) diameter pots; Please be sure to verify the shaft diameter of your pots before ordering, to avoid any unfit problems.

Pickup mounting screws and springs for most bass guitar pickups or P90 pickups

Screws Dimension: 36mm(total length including head) x 2.6mm(thread diameter) x 4.2mm(head diameter); Pickup Springs Dimenison: 26mm(Length) x 4.7mm(Outer diameter) x 3.3mm(Inner diameter)

Due to the wide variety of pickups and screws in the market,please be sure to verify the dimensions carefully before you order the item; We can not promise these screws would fit all the bass pickups or P90 Pickups

Pickup Height screws are metric thread which can fit most (not all) Epiphone pickups or most humbucker pickups made in China

4 Pickup Height Screws Dimension: 28.4mm(total length including head) x 2.9mm(thread diameter); 8 Pickup Frame Screws Dimension: 17.6mm(total length including head) x 2.5mm(thread diameter); Pickup Springs Dimenison: 26mm(Length) x 4.7mm(Outer diameter) x 3.3mm(Inner diameter)

Due to the wide variety of pickups and screws in the market,please be sure to verify the dimensions carefully before you order the item; We can not promise these screws would fit all the Epiphone Les Paul Pickups or Humbucker Pickups made in China

Outside diameter: about 18.2mm; Total height: about 18.5mm

Fits any guitars or basses which have 6mm or less than 6mm diameter Solid or Split shaft pots; But they DO NOT fit some larger USA 1/4"(6.35mm) diameter pots; Please be sure to verify the shaft diameter of your pots before ordering, to avoid any unfit problems.

High quality knobs with faultless finish

Pickup Height screws are Imperial/USA thread which can fit most (not all) Gibson/EMG/Seymour Duncan or Dimarzio Pickups

4 Pickup Height Screws Dimension: 28.4mm(total length including head) x 2.9mm(thread diameter); 8 Pickup Frame Screws Dimension: 17.6mm(total length including head) x 2.5mm(thread diameter); Pickup Springs Dimenison: 26mm(Length) x 4.7mm(Outer diameter) x 3.3mm(Inner diameter)

Due to the wide variety of pickups and screws in the market,please be sure to verify the dimensions carefully before you order the item; We can not promise these screws would fit all the Epiphone Les Paul Pickups or Humbucker Pickups made in China

Precision engineered, with quality Plating. The roller saddles are perfect for using with a Bigsby, or just to reduce string breakages and add sustain on any LP style guitar. This model has 6.3mm post holes to drop over 6mm posts, typically found on most Epiphone guitars and many other similar import guitar brands.

Includes anchors and large M8 threaded bridge posts with 6mm diameter top section

High stability saddle retention rings to eliminate saddle rattle

The Strat Pickguard Set fits USA/Mexican Standard Fender Strats,but not Fender Squier Strats or other types of Strats.If you have other types of strats,you may need to make a little modification to let it fit

Made of plastic; The pickguard and trem cover have plastic films which should be peeled off after installing

Thickness is about 2.2mm (+/- 0.2mm error, because different bulks materials might be varied a little different thickness)

The Strat Pickguard Set fits USA/Mexican Standard Fender Strats,but not Fender Squier Strats or other types of Strats.If you have other types of strats,you may need to make a little modification to let it fit

Made of plastic; The pickguard and trem cover have plastic films which should be peeled off after installing

Thickness is about 2.2mm (+/- 0.2mm error, because different bulks materials might be varied a little different thickness)

Color: Unbleached (Curved Bottom, not Flat Bottom),Material: Real Bone

Dimension: 42x3.2x5/5.6/4.6 (mm)

String Spacing (E to E): 35.4mm

Pickup Height screws are metric thread which can fit most (not all) Epiphone pickups or most humbucker pickups made in China

4 Pickup Height Screws Dimension: 28.4mm(total length including head) x 2.9mm(thread diameter); 8 Pickup Frame Screws Dimension: 17.6mm(total length including head) x 2.5mm(thread diameter); Pickup Springs Dimenison: 26mm(Length) x 4.7mm(Outer diameter) x 3.3mm(Inner diameter)

Due to the wide variety of pickups and screws in the market,please be sure to verify the dimensions carefully before you order the item; We can not promise these screws would fit all the Epiphone Les Paul Pickups or Humbucker Pickups made in China

Doear single coil; High power fatter sound

50mm Pole Spacing

Resistance: 8.5K 5.2H